########################################################### # # uemacs # ########################################################### # # UEMACS_VERSION, UEMACS_SITE and UEMACS_SOURCE define # the upstream location of the source code for the package. # UEMACS_DIR is the directory which is created when the source # archive is unpacked. # UEMACS_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # UEMACS_SITE=http://www.kernel.org/pub/linux/kernel/uemacs UEMACS_VERSION=4.0.15 UEMACS_SOURCE=em-$(UEMACS_VERSION)-lt.tar.gz UEMACS_DIR=em-$(UEMACS_VERSION)-lt UEMACS_UNZIP=zcat UEMACS_MAINTAINER=NSLU2 Linux UEMACS_DESCRIPTION=uEmacs/PK, Full screen editor based on MicroEMACS 3.9e. UEMACS_SECTION=editor UEMACS_PRIORITY=optional UEMACS_DEPENDS=ncurses UEMACS_SUGGESTS= UEMACS_CONFLICTS= # # UEMACS_IPK_VERSION should be incremented when the ipk changes. # UEMACS_IPK_VERSION=2 # # UEMACS_CONFFILES should be a list of user-editable files UEMACS_CONFFILES=/opt/etc/.uemacsrc # # UEMACS_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # UEMACS_PATCHES=$(UEMACS_SOURCE_DIR)/epath.h.patch $(UEMACS_SOURCE_DIR)/static-forward-decl.patch ifeq (wl500g, $(OPTWARE_TARGET)) UEMACS_PATCHES+=$(UEMACS_SOURCE_DIR)/cuserid.patch endif # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # UEMACS_CPPFLAGS=-include $(TARGET_INCDIR)/errno.h UEMACS_LDFLAGS= # # UEMACS_BUILD_DIR is the directory in which the build is done. # UEMACS_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # UEMACS_IPK_DIR is the directory in which the ipk is built. # UEMACS_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # UEMACS_BUILD_DIR=$(BUILD_DIR)/uemacs UEMACS_SOURCE_DIR=$(SOURCE_DIR)/uemacs UEMACS_IPK_DIR=$(BUILD_DIR)/uemacs-$(UEMACS_VERSION)-ipk UEMACS_IPK=$(BUILD_DIR)/uemacs_$(UEMACS_VERSION)-$(UEMACS_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: uemacs-source uemacs-unpack uemacs uemacs-stage uemacs-ipk uemacs-clean uemacs-dirclean uemacs-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(UEMACS_SOURCE): $(WGET) -P $(DL_DIR) $(UEMACS_SITE)/$(UEMACS_SOURCE) || \ $(WGET) -P $(DL_DIR) $(SOURCES_NLO_SITE)/$(UEMACS_SOURCE) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # uemacs-source: $(DL_DIR)/$(UEMACS_SOURCE) $(UEMACS_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # $(UEMACS_BUILD_DIR)/.configured: $(DL_DIR)/$(UEMACS_SOURCE) $(UEMACS_PATCHES) make/uemacs.mk $(MAKE) ncurses-stage rm -rf $(BUILD_DIR)/$(UEMACS_DIR) $(UEMACS_BUILD_DIR) $(UEMACS_UNZIP) $(DL_DIR)/$(UEMACS_SOURCE) | tar -C $(BUILD_DIR) -xvf - if test -n "$(UEMACS_PATCHES)" ; \ then cat $(UEMACS_PATCHES) | \ patch -bd $(BUILD_DIR)/$(UEMACS_DIR) -p0 ; \ fi if test "$(BUILD_DIR)/$(UEMACS_DIR)" != "$(UEMACS_BUILD_DIR)" ; \ then mv $(BUILD_DIR)/$(UEMACS_DIR) $(UEMACS_BUILD_DIR) ; \ fi sed -i -e 's|strip|$(STRIP_COMMAND)|' $(@D)/makefile sed -i -e 's|MSDOS.*PKCODE|0|' $(@D)/main.c # (cd $(UEMACS_BUILD_DIR); \ $(TARGET_CONFIGURE_OPTS) \ CPPFLAGS="$(STAGING_CPPFLAGS) $(UEMACS_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(UEMACS_LDFLAGS)" \ ./configure \ --build=$(GNU_HOST_NAME) \ --host=$(GNU_TARGET_NAME) \ --target=$(GNU_TARGET_NAME) \ --prefix=/opt \ --disable-nls \ --disable-static \ ) # $(PATCH_LIBTOOL) $(UEMACS_BUILD_DIR)/libtool touch $@ uemacs-unpack: $(UEMACS_BUILD_DIR)/.configured # # This builds the actual binary. # $(UEMACS_BUILD_DIR)/.built: $(UEMACS_BUILD_DIR)/.configured rm -f $@ $(MAKE) -C $(@D) \ $(TARGET_CONFIGURE_OPTS) \ CFLAGS="$(STAGING_CPPFLAGS) $(UEMACS_CPPFLAGS)" \ LIBS="-lncurses $(STAGING_LDFLAGS) $(UEMACS_LDFLAGS)" \ ; touch $@ # # This is the build convenience target. # uemacs: $(UEMACS_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(UEMACS_BUILD_DIR)/.staged: $(UEMACS_BUILD_DIR)/.built rm -f $@ # $(MAKE) -C $(UEMACS_BUILD_DIR) DESTDIR=$(STAGING_DIR) install touch $@ uemacs-stage: $(UEMACS_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/uemacs # $(UEMACS_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: uemacs" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(UEMACS_PRIORITY)" >>$@ @echo "Section: $(UEMACS_SECTION)" >>$@ @echo "Version: $(UEMACS_VERSION)-$(UEMACS_IPK_VERSION)" >>$@ @echo "Maintainer: $(UEMACS_MAINTAINER)" >>$@ @echo "Source: $(UEMACS_SITE)/$(UEMACS_SOURCE)" >>$@ @echo "Description: $(UEMACS_DESCRIPTION)" >>$@ @echo "Depends: $(UEMACS_DEPENDS)" >>$@ @echo "Suggests: $(UEMACS_SUGGESTS)" >>$@ @echo "Conflicts: $(UEMACS_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(UEMACS_IPK_DIR)/opt/sbin or $(UEMACS_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(UEMACS_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(UEMACS_IPK_DIR)/opt/etc/uemacs/... # Documentation files should be installed in $(UEMACS_IPK_DIR)/opt/doc/uemacs/... # Daemon startup scripts should be installed in $(UEMACS_IPK_DIR)/opt/etc/init.d/S??uemacs # # You may need to patch your application to make it use these locations. # $(UEMACS_IPK): $(UEMACS_BUILD_DIR)/.built rm -rf $(UEMACS_IPK_DIR) $(BUILD_DIR)/uemacs_*_$(TARGET_ARCH).ipk install -d $(UEMACS_IPK_DIR)/opt/bin $(UEMACS_IPK_DIR)/opt/etc $(MAKE) -C $(UEMACS_BUILD_DIR) \ BINDIR=$(UEMACS_IPK_DIR)/opt/bin \ LIBDIR=$(UEMACS_IPK_DIR)/opt/etc \ install cd $(UEMACS_IPK_DIR)/opt/bin; ln -s em uemacs mv $(UEMACS_IPK_DIR)/opt/etc/.emacsrc $(UEMACS_IPK_DIR)/opt/etc/.uemacsrc mv $(UEMACS_IPK_DIR)/opt/etc/emacs.hlp $(UEMACS_IPK_DIR)/opt/etc/uemacs.hlp # install -d $(UEMACS_IPK_DIR)/opt/etc/ # install -m 644 $(UEMACS_SOURCE_DIR)/uemacs.conf $(UEMACS_IPK_DIR)/opt/etc/uemacs.conf # install -d $(UEMACS_IPK_DIR)/opt/etc/init.d # install -m 755 $(UEMACS_SOURCE_DIR)/rc.uemacs $(UEMACS_IPK_DIR)/opt/etc/init.d/SXXuemacs # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(UEMACS_IPK_DIR)/opt/etc/init.d/SXXuemacs $(MAKE) $(UEMACS_IPK_DIR)/CONTROL/control # install -m 755 $(UEMACS_SOURCE_DIR)/postinst $(UEMACS_IPK_DIR)/CONTROL/postinst # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(UEMACS_IPK_DIR)/CONTROL/postinst # install -m 755 $(UEMACS_SOURCE_DIR)/prerm $(UEMACS_IPK_DIR)/CONTROL/prerm # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(UEMACS_IPK_DIR)/CONTROL/prerm echo $(UEMACS_CONFFILES) | sed -e 's/ /\n/g' > $(UEMACS_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(UEMACS_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # uemacs-ipk: $(UEMACS_IPK) # # This is called from the top level makefile to clean all of the built files. # uemacs-clean: rm -f $(UEMACS_BUILD_DIR)/.built -$(MAKE) -C $(UEMACS_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # uemacs-dirclean: rm -rf $(BUILD_DIR)/$(UEMACS_DIR) $(UEMACS_BUILD_DIR) $(UEMACS_IPK_DIR) $(UEMACS_IPK) # # # Some sanity check for the package. # uemacs-check: $(UEMACS_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $(UEMACS_IPK)