########################################################### # # sabnzbdplus # ########################################################### # # SABNZBDPLUS_VERSION, SABNZBDPLUS_SITE and SABNZBDPLUS_SOURCE define # the upstream location of the source code for the package. # SABNZBDPLUS_DIR is the directory which is created when the source # archive is unpacked. # SABNZBDPLUS_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # SABNZBDPLUS_SITE=http://$(SOURCEFORGE_MIRROR)/sourceforge/sabnzbdplus SABNZBDPLUS_VERSION=0.5.6 SABNZBDPLUS_SOURCE=SABnzbd-$(SABNZBDPLUS_VERSION)-src.tar.gz SABNZBDPLUS_DIR=SABnzbd-$(SABNZBDPLUS_VERSION) SABNZBDPLUS_UNZIP=zcat SABNZBDPLUS_MAINTAINER=NSLU2 Linux SABNZBDPLUS_DESCRIPTION=A web-interface based binary newsgrabber written in python, with nzb file support. SABNZBDPLUS_SECTION=net SABNZBDPLUS_PRIORITY=optional SABNZBDPLUS_DEPENDS=py25-cheetah, py25-yenc, par2cmdline SABNZBDPLUS_SUGGESTS=unrar, unzip, py25-feedparser, py25-openssl SABNZBDPLUS_CONFLICTS=py24-sabnzbd, py25-sabnzbd # # SABNZBDPLUS_IPK_VERSION should be incremented when the ipk changes. # SABNZBDPLUS_IPK_VERSION=1 # # SABNZBDPLUS_CONFFILES should be a list of user-editable files SABNZBDPLUS_CONFFILES=/opt/etc/SABnzbd.ini /opt/etc/init.d/S70sabnzbdplus # # SABNZBDPLUS_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # #SABNZBDPLUS_PATCHES= # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # SABNZBDPLUS_CPPFLAGS= SABNZBDPLUS_LDFLAGS= # # SABNZBDPLUS_BUILD_DIR is the directory in which the build is done. # SABNZBDPLUS_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # SABNZBDPLUS_IPK_DIR is the directory in which the ipk is built. # SABNZBDPLUS_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # SABNZBDPLUS_BUILD_DIR=$(BUILD_DIR)/sabnzbdplus SABNZBDPLUS_SOURCE_DIR=$(SOURCE_DIR)/sabnzbdplus SABNZBDPLUS_IPK_DIR=$(BUILD_DIR)/sabnzbdplus-$(SABNZBDPLUS_VERSION)-ipk SABNZBDPLUS_IPK=$(BUILD_DIR)/sabnzbdplus_$(SABNZBDPLUS_VERSION)-$(SABNZBDPLUS_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: sabnzbdplus-source sabnzbdplus-unpack sabnzbdplus sabnzbdplus-stage sabnzbdplus-ipk sabnzbdplus-clean sabnzbdplus-dirclean sabnzbdplus-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(SABNZBDPLUS_SOURCE): $(WGET) -P $(@D) $(SABNZBDPLUS_SITE)/$(@F) || \ $(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # sabnzbdplus-source: $(DL_DIR)/$(SABNZBDPLUS_SOURCE) $(SABNZBDPLUS_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # $(SABNZBDPLUS_BUILD_DIR)/.configured: $(DL_DIR)/$(SABNZBDPLUS_SOURCE) $(SABNZBDPLUS_PATCHES) make/sabnzbdplus.mk # $(MAKE) py-setuptools-stage py-elementtree-stage py-cherrypy-stage rm -rf $(BUILD_DIR)/$(SABNZBDPLUS_DIR) $(@D) mkdir -p $(@D) # 2.5 $(SABNZBDPLUS_UNZIP) $(DL_DIR)/$(SABNZBDPLUS_SOURCE) | tar -C $(BUILD_DIR) -xvf - if test -n "$(SABNZBDPLUS_PATCHES)"; then \ cat $(SABNZBDPLUS_PATCHES) | patch -d $(BUILD_DIR)/$(SABNZBDPLUS_DIR) -p1; \ fi mv $(BUILD_DIR)/$(SABNZBDPLUS_DIR) $(@D)/2.5 # (cd $(@D)/2.5; \ ( \ echo "[build_ext]"; \ echo "include-dirs=$(STAGING_INCLUDE_DIR):$(STAGING_INCLUDE_DIR)/python2.5"; \ echo "library-dirs=$(STAGING_LIB_DIR)"; \ echo "rpath=/opt/lib"; \ echo "[build_scripts]"; \ echo "executable=/opt/bin/python2.5"; \ echo "[install]"; \ echo "install_scripts=/opt/bin"; \ ) >> setup.cfg; \ ) sed -i -e 's|/usr/bin/python|/opt/bin/python2.5|g' $(@D)/2.5/SABnzbd.py touch $@ sabnzbdplus-unpack: $(SABNZBDPLUS_BUILD_DIR)/.configured # # This builds the actual binary. # $(SABNZBDPLUS_BUILD_DIR)/.built: $(SABNZBDPLUS_BUILD_DIR)/.configured rm -f $@ touch $@ # # This is the build convenience target. # sabnzbdplus: $(SABNZBDPLUS_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # #$(SABNZBDPLUS_BUILD_DIR)/.staged: $(SABNZBDPLUS_BUILD_DIR)/.built # rm -f $@ # $(MAKE) -C $(SABNZBDPLUS_BUILD_DIR) DESTDIR=$(STAGING_DIR) install # touch $@ # #sabnzbdplus-stage: $(SABNZBDPLUS_BUILD_DIR)/.staged # # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/sabnzbdplus # $(SABNZBDPLUS_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: sabnzbdplus" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(SABNZBDPLUS_PRIORITY)" >>$@ @echo "Section: $(SABNZBDPLUS_SECTION)" >>$@ @echo "Version: $(SABNZBDPLUS_VERSION)-$(SABNZBDPLUS_IPK_VERSION)" >>$@ @echo "Maintainer: $(SABNZBDPLUS_MAINTAINER)" >>$@ @echo "Source: $(SABNZBDPLUS_SITE)/$(SABNZBDPLUS_SOURCE)" >>$@ @echo "Description: $(SABNZBDPLUS_DESCRIPTION)" >>$@ @echo "Depends: $(SABNZBDPLUS_DEPENDS)" >>$@ @echo "Conflicts: $(SABNZBDPLUS_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(SABNZBDPLUS_IPK_DIR)/opt/sbin or $(SABNZBDPLUS_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(SABNZBDPLUS_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(SABNZBDPLUS_IPK_DIR)/opt/etc/sabnzbdplus/... # Documentation files should be installed in $(SABNZBDPLUS_IPK_DIR)/opt/doc/sabnzbdplus/... # Daemon startup scripts should be installed in $(SABNZBDPLUS_IPK_DIR)/opt/etc/init.d/S70sabnzbdplus # # You may need to patch your application to make it use these locations. # $(SABNZBDPLUS_IPK): $(SABNZBDPLUS_BUILD_DIR)/.built rm -rf $(SABNZBDPLUS_IPK_DIR) $(BUILD_DIR)/sabnzbdplus_*_$(TARGET_ARCH).ipk # cd $(SABNZBDPLUS_BUILD_DIR)/2.5; \ PYTHONPATH=$(STAGING_LIB_DIR)/python2.5/site-packages \ $(TARGET_CONFIGURE_OPTS) LDSHARED='$(TARGET_CC) -shared' \ $(HOST_STAGING_PREFIX)/bin/python2.5 setup.py install \ --root=$(SABNZBDPLUS_IPK_DIR) --prefix=/opt install -d $(SABNZBDPLUS_IPK_DIR)/opt/share/SABnzbd cp -rp $(SABNZBDPLUS_BUILD_DIR)/2.5/* $(SABNZBDPLUS_IPK_DIR)/opt/share/SABnzbd # # install -d $(SABNZBDPLUS_IPK_DIR)/opt/etc # install -m 644 $(SABNZBDPLUS_SOURCE_DIR)/SABnzbd.ini $(SABNZBDPLUS_IPK_DIR)/opt/etc/SABnzbd.ini # install -d $(SABNZBDPLUS_IPK_DIR)/opt/etc/init.d # install -m 755 $(SABNZBDPLUS_SOURCE_DIR)/rc.sabnzbdplus $(SABNZBDPLUS_IPK_DIR)/opt/etc/init.d/S70sabnzbdplus # install -d $(SABNZBDPLUS_IPK_DIR)/opt/tmp/downloads # install -d $(SABNZBDPLUS_IPK_DIR)/opt/tmp/SABnzbd/cache # install -d $(SABNZBDPLUS_IPK_DIR)/opt/tmp/SABnzbd/tmp # install -d $(SABNZBDPLUS_IPK_DIR)/opt/tmp/SABnzbd/nzb # install -d $(SABNZBDPLUS_IPK_DIR)/opt/tmp/SABnzbd/nzb/backup # install -d $(SABNZBDPLUS_IPK_DIR)/opt/var/log $(MAKE) $(SABNZBDPLUS_IPK_DIR)/CONTROL/control # install -m 644 $(SABNZBDPLUS_SOURCE_DIR)/postinst $(SABNZBDPLUS_IPK_DIR)/CONTROL/postinst # echo $(SABNZBDPLUS_CONFFILES) | sed -e 's/ /\n/g' > $(SABNZBDPLUS_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(SABNZBDPLUS_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # sabnzbdplus-ipk: $(SABNZBDPLUS_IPK) # # This is called from the top level makefile to clean all of the built files. # sabnzbdplus-clean: rm -f $(SABNZBDPLUS_BUILD_DIR)/.built -$(MAKE) -C $(SABNZBDPLUS_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # sabnzbdplus-dirclean: rm -rf $(BUILD_DIR)/$(SABNZBDPLUS_DIR) $(SABNZBDPLUS_BUILD_DIR) $(SABNZBDPLUS_IPK_DIR) $(SABNZBDPLUS_IPK) # # # Some sanity check for the package. # sabnzbdplus-check: $(SABNZBDPLUS_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $^