########################################################### # # radiusclient-ng # ########################################################### # # RADIUSCLIENT_NG_VERSION, RADIUSCLIENT_NG_SITE and RADIUSCLIENT_NG_SOURCE define # the upstream location of the source code for the package. # RADIUSCLIENT_NG_DIR is the directory which is created when the source # archive is unpacked. # RADIUSCLIENT_NG_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # RADIUSCLIENT_NG_SITE=http://download2.berlios.de/radiusclient-ng RADIUSCLIENT_NG_VERSION=0.5.6 RADIUSCLIENT_NG_SOURCE=radiusclient-ng-$(RADIUSCLIENT_NG_VERSION).tar.gz RADIUSCLIENT_NG_DIR=radiusclient-ng-$(RADIUSCLIENT_NG_VERSION) RADIUSCLIENT_NG_UNZIP=zcat RADIUSCLIENT_NG_MAINTAINER=NSLU2 Linux RADIUSCLIENT_NG_DESCRIPTION=easy-to-use and standard compliant \ library suitable for developing free and commercial software that need \ support for a RADIUS protocol (RFCs 2138 and 2139) RADIUSCLIENT_NG_SECTION=util RADIUSCLIENT_NG_PRIORITY=optional RADIUSCLIENT_NG_DEPENDS= RADIUSCLIENT_NG_SUGGESTS= RADIUSCLIENT_NG_CONFLICTS= # # RADIUSCLIENT_NG_IPK_VERSION should be incremented when the ipk changes. # RADIUSCLIENT_NG_IPK_VERSION=1 # # RADIUSCLIENT_NG_CONFFILES should be a list of user-editable files #RADIUSCLIENT_NG_CONFFILES=/opt/etc/radiusclient-ng.conf /opt/etc/init.d/SXXradiusclient-ng # # RADIUSCLIENT_NG_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # RADIUSCLIENT_NG_PATCHES=$(RADIUSCLIENT_NG_SOURCE_DIR)/radiusclient-ng.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # RADIUSCLIENT_NG_CPPFLAGS= RADIUSCLIENT_NG_LDFLAGS= # # RADIUSCLIENT_NG_BUILD_DIR is the directory in which the build is done. # RADIUSCLIENT_NG_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # RADIUSCLIENT_NG_IPK_DIR is the directory in which the ipk is built. # RADIUSCLIENT_NG_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # RADIUSCLIENT_NG_BUILD_DIR=$(BUILD_DIR)/radiusclient-ng RADIUSCLIENT_NG_SOURCE_DIR=$(SOURCE_DIR)/radiusclient-ng RADIUSCLIENT_NG_IPK_DIR=$(BUILD_DIR)/radiusclient-ng-$(RADIUSCLIENT_NG_VERSION)-ipk RADIUSCLIENT_NG_IPK=$(BUILD_DIR)/radiusclient-ng_$(RADIUSCLIENT_NG_VERSION)-$(RADIUSCLIENT_NG_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: radiusclient-ng-source radiusclient-ng-unpack radiusclient-ng radiusclient-ng-stage radiusclient-ng-ipk radiusclient-ng-clean radiusclient-ng-dirclean radiusclient-ng-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(RADIUSCLIENT_NG_SOURCE): $(WGET) -P $(DL_DIR) $(RADIUSCLIENT_NG_SITE)/$(RADIUSCLIENT_NG_SOURCE) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # radiusclient-ng-source: $(DL_DIR)/$(RADIUSCLIENT_NG_SOURCE) $(RADIUSCLIENT_NG_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # $(RADIUSCLIENT_NG_BUILD_DIR)/.configured: $(DL_DIR)/$(RADIUSCLIENT_NG_SOURCE) $(RADIUSCLIENT_NG_PATCHES) make/radiusclient-ng.mk #$(MAKE) -stage -stage rm -rf $(BUILD_DIR)/$(RADIUSCLIENT_NG_DIR) $(RADIUSCLIENT_NG_BUILD_DIR) $(RADIUSCLIENT_NG_UNZIP) $(DL_DIR)/$(RADIUSCLIENT_NG_SOURCE) | tar -C $(BUILD_DIR) -xvf - if test -n "$(RADIUSCLIENT_NG_PATCHES)" ; \ then cat $(RADIUSCLIENT_NG_PATCHES) | \ patch -d $(BUILD_DIR)/$(RADIUSCLIENT_NG_DIR) -p1 ; \ fi if test "$(BUILD_DIR)/$(RADIUSCLIENT_NG_DIR)" != "$(RADIUSCLIENT_NG_BUILD_DIR)" ; \ then mv $(BUILD_DIR)/$(RADIUSCLIENT_NG_DIR) $(RADIUSCLIENT_NG_BUILD_DIR) ; \ fi (cd $(RADIUSCLIENT_NG_BUILD_DIR); \ $(TARGET_CONFIGURE_OPTS) \ CPPFLAGS="$(STAGING_CPPFLAGS) $(RADIUSCLIENT_NG_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(RADIUSCLIENT_NG_LDFLAGS)" \ ./configure \ --build=$(GNU_HOST_NAME) \ --host=$(GNU_TARGET_NAME) \ --target=$(GNU_TARGET_NAME) \ --prefix=/opt \ --disable-nls \ --disable-static \ ) $(PATCH_LIBTOOL) $(RADIUSCLIENT_NG_BUILD_DIR)/libtool touch $(RADIUSCLIENT_NG_BUILD_DIR)/.configured radiusclient-ng-unpack: $(RADIUSCLIENT_NG_BUILD_DIR)/.configured # # This builds the actual binary. # $(RADIUSCLIENT_NG_BUILD_DIR)/.built: $(RADIUSCLIENT_NG_BUILD_DIR)/.configured rm -f $(RADIUSCLIENT_NG_BUILD_DIR)/.built $(MAKE) -C $(RADIUSCLIENT_NG_BUILD_DIR) touch $(RADIUSCLIENT_NG_BUILD_DIR)/.built # # This is the build convenience target. # radiusclient-ng: $(RADIUSCLIENT_NG_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(RADIUSCLIENT_NG_BUILD_DIR)/.staged: $(RADIUSCLIENT_NG_BUILD_DIR)/.built rm -f $(RADIUSCLIENT_NG_BUILD_DIR)/.staged $(MAKE) -C $(RADIUSCLIENT_NG_BUILD_DIR) DESTDIR=$(STAGING_DIR) install touch $(RADIUSCLIENT_NG_BUILD_DIR)/.staged radiusclient-ng-stage: $(RADIUSCLIENT_NG_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/radiusclient-ng # $(RADIUSCLIENT_NG_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: radiusclient-ng" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(RADIUSCLIENT_NG_PRIORITY)" >>$@ @echo "Section: $(RADIUSCLIENT_NG_SECTION)" >>$@ @echo "Version: $(RADIUSCLIENT_NG_VERSION)-$(RADIUSCLIENT_NG_IPK_VERSION)" >>$@ @echo "Maintainer: $(RADIUSCLIENT_NG_MAINTAINER)" >>$@ @echo "Source: $(RADIUSCLIENT_NG_SITE)/$(RADIUSCLIENT_NG_SOURCE)" >>$@ @echo "Description: $(RADIUSCLIENT_NG_DESCRIPTION)" >>$@ @echo "Depends: $(RADIUSCLIENT_NG_DEPENDS)" >>$@ @echo "Suggests: $(RADIUSCLIENT_NG_SUGGESTS)" >>$@ @echo "Conflicts: $(RADIUSCLIENT_NG_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(RADIUSCLIENT_NG_IPK_DIR)/opt/sbin or $(RADIUSCLIENT_NG_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(RADIUSCLIENT_NG_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(RADIUSCLIENT_NG_IPK_DIR)/opt/etc/radiusclient-ng/... # Documentation files should be installed in $(RADIUSCLIENT_NG_IPK_DIR)/opt/doc/radiusclient-ng/... # Daemon startup scripts should be installed in $(RADIUSCLIENT_NG_IPK_DIR)/opt/etc/init.d/S??radiusclient-ng # # You may need to patch your application to make it use these locations. # $(RADIUSCLIENT_NG_IPK): $(RADIUSCLIENT_NG_BUILD_DIR)/.built rm -rf $(RADIUSCLIENT_NG_IPK_DIR) $(BUILD_DIR)/radiusclient-ng_*_$(TARGET_ARCH).ipk $(MAKE) -C $(RADIUSCLIENT_NG_BUILD_DIR) DESTDIR=$(RADIUSCLIENT_NG_IPK_DIR) install-strip $(MAKE) $(RADIUSCLIENT_NG_IPK_DIR)/CONTROL/control cd $(BUILD_DIR); $(IPKG_BUILD) $(RADIUSCLIENT_NG_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # radiusclient-ng-ipk: $(RADIUSCLIENT_NG_IPK) # # This is called from the top level makefile to clean all of the built files. # radiusclient-ng-clean: rm -f $(RADIUSCLIENT_NG_BUILD_DIR)/.built -$(MAKE) -C $(RADIUSCLIENT_NG_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # radiusclient-ng-dirclean: rm -rf $(BUILD_DIR)/$(RADIUSCLIENT_NG_DIR) $(RADIUSCLIENT_NG_BUILD_DIR) $(RADIUSCLIENT_NG_IPK_DIR) $(RADIUSCLIENT_NG_IPK) # # # Some sanity check for the package. # radiusclient-ng-check: $(RADIUSCLIENT_NG_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $(RADIUSCLIENT_NG_IPK)