########################################################### # # py-yenc # ########################################################### # # PY-YENC_VERSION, PY-YENC_SITE and PY-YENC_SOURCE define # the upstream location of the source code for the package. # PY-YENC_DIR is the directory which is created when the source # archive is unpacked. # PY-YENC_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # PY-YENC_SITE=http://sabnzbd.sourceforge.net PY-YENC_VERSION=0.3 PY-YENC_SOURCE=yenc-$(PY-YENC_VERSION).tar.gz PY-YENC_DIR=yenc-$(PY-YENC_VERSION) PY-YENC_UNZIP=zcat PY-YENC_MAINTAINER=NSLU2 Linux PY-YENC_DESCRIPTION=A module that provides only raw yEnc encoding/decoding with builtin crc32 calculation (C implementation). PY-YENC_SECTION=misc PY-YENC_PRIORITY=optional PY24-YENC_DEPENDS=python24 PY25-YENC_DEPENDS=python25 PY-YENC_CONFLICTS= # # PY-YENC_IPK_VERSION should be incremented when the ipk changes. # PY-YENC_IPK_VERSION=1 # # PY-YENC_CONFFILES should be a list of user-editable files #PY-YENC_CONFFILES=/opt/etc/py-yenc.conf /opt/etc/init.d/SXXpy-yenc # # PY-YENC_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # #PY-YENC_PATCHES=$(PY-YENC_SOURCE_DIR)/configure.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # PY-YENC_CPPFLAGS= PY-YENC_LDFLAGS= # # PY-YENC_BUILD_DIR is the directory in which the build is done. # PY-YENC_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # PY-YENC_IPK_DIR is the directory in which the ipk is built. # PY-YENC_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # PY-YENC_BUILD_DIR=$(BUILD_DIR)/py-yenc PY-YENC_SOURCE_DIR=$(SOURCE_DIR)/py-yenc PY24-YENC_IPK_DIR=$(BUILD_DIR)/py24-yenc-$(PY-YENC_VERSION)-ipk PY24-YENC_IPK=$(BUILD_DIR)/py24-yenc_$(PY-YENC_VERSION)-$(PY-YENC_IPK_VERSION)_$(TARGET_ARCH).ipk PY25-YENC_IPK_DIR=$(BUILD_DIR)/py25-yenc-$(PY-YENC_VERSION)-ipk PY25-YENC_IPK=$(BUILD_DIR)/py25-yenc_$(PY-YENC_VERSION)-$(PY-YENC_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: py-yenc-source py-yenc-unpack py-yenc py-yenc-stage py-yenc-ipk py-yenc-clean py-yenc-dirclean py-yenc-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(PY-YENC_SOURCE): $(WGET) -P $(DL_DIR) $(PY-YENC_SITE)/$(@F) || \ $(WGET) -P $(DL_DIR) $(SOURCES_NLO_SITE)/$(@F) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # py-yenc-source: $(DL_DIR)/$(PY-YENC_SOURCE) $(PY-YENC_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # $(PY-YENC_BUILD_DIR)/.configured: $(DL_DIR)/$(PY-YENC_SOURCE) $(PY-YENC_PATCHES) $(MAKE) py-setuptools-stage rm -rf $(BUILD_DIR)/$(PY-YENC_DIR) $(PY-YENC_BUILD_DIR) mkdir -p $(PY-YENC_BUILD_DIR) # 2.4 $(PY-YENC_UNZIP) $(DL_DIR)/$(PY-YENC_SOURCE) | tar -C $(BUILD_DIR) -xvf - # cat $(PY-YENC_PATCHES) | patch -d $(BUILD_DIR)/$(PY-YENC_DIR) -p1 mv $(BUILD_DIR)/$(PY-YENC_DIR) $(PY-YENC_BUILD_DIR)/2.4 (cd $(PY-YENC_BUILD_DIR)/2.4; \ ( \ echo "[build_ext]"; \ echo "include-dirs=$(STAGING_INCLUDE_DIR):$(STAGING_INCLUDE_DIR)/python2.4"; \ echo "library-dirs=$(STAGING_LIB_DIR)"; \ echo "rpath=/opt/lib"; \ echo "[build_scripts]"; \ echo "executable=/opt/bin/python2.4"; \ echo "[install]"; \ echo "install_scripts=/opt/bin"; \ ) >> setup.cfg; \ ) # 2.5 $(PY-YENC_UNZIP) $(DL_DIR)/$(PY-YENC_SOURCE) | tar -C $(BUILD_DIR) -xvf - # cat $(PY-YENC_PATCHES) | patch -d $(BUILD_DIR)/$(PY-YENC_DIR) -p1 mv $(BUILD_DIR)/$(PY-YENC_DIR) $(PY-YENC_BUILD_DIR)/2.5 (cd $(PY-YENC_BUILD_DIR)/2.5; \ ( \ echo "[build_ext]"; \ echo "include-dirs=$(STAGING_INCLUDE_DIR):$(STAGING_INCLUDE_DIR)/python2.5"; \ echo "library-dirs=$(STAGING_LIB_DIR)"; \ echo "rpath=/opt/lib"; \ echo "[build_scripts]"; \ echo "executable=/opt/bin/python2.5"; \ echo "[install]"; \ echo "install_scripts=/opt/bin"; \ ) >> setup.cfg; \ ) touch $@ py-yenc-unpack: $(PY-YENC_BUILD_DIR)/.configured # # This builds the actual binary. # $(PY-YENC_BUILD_DIR)/.built: $(PY-YENC_BUILD_DIR)/.configured rm -f $@ cd $(PY-YENC_BUILD_DIR)/2.4; \ $(TARGET_CONFIGURE_OPTS) LDSHARED='$(TARGET_CC) -shared' \ $(HOST_STAGING_PREFIX)/bin/python2.4 setup.py build cd $(PY-YENC_BUILD_DIR)/2.5; \ $(TARGET_CONFIGURE_OPTS) LDSHARED='$(TARGET_CC) -shared' \ $(HOST_STAGING_PREFIX)/bin/python2.5 setup.py build touch $@ # # This is the build convenience target. # py-yenc: $(PY-YENC_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(PY-YENC_BUILD_DIR)/.staged: $(PY-YENC_BUILD_DIR)/.built rm -f $@ # $(MAKE) -C $(PY-YENC_BUILD_DIR) DESTDIR=$(STAGING_DIR) install touch $@ py-yenc-stage: $(PY-YENC_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/py-yenc # $(PY24-YENC_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: py24-yenc" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(PY-YENC_PRIORITY)" >>$@ @echo "Section: $(PY-YENC_SECTION)" >>$@ @echo "Version: $(PY-YENC_VERSION)-$(PY-YENC_IPK_VERSION)" >>$@ @echo "Maintainer: $(PY-YENC_MAINTAINER)" >>$@ @echo "Source: $(PY-YENC_SITE)/$(PY-YENC_SOURCE)" >>$@ @echo "Description: $(PY-YENC_DESCRIPTION)" >>$@ @echo "Depends: $(PY24-YENC_DEPENDS)" >>$@ @echo "Conflicts: $(PY-YENC_CONFLICTS)" >>$@ $(PY25-YENC_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: py25-yenc" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(PY-YENC_PRIORITY)" >>$@ @echo "Section: $(PY-YENC_SECTION)" >>$@ @echo "Version: $(PY-YENC_VERSION)-$(PY-YENC_IPK_VERSION)" >>$@ @echo "Maintainer: $(PY-YENC_MAINTAINER)" >>$@ @echo "Source: $(PY-YENC_SITE)/$(PY-YENC_SOURCE)" >>$@ @echo "Description: $(PY-YENC_DESCRIPTION)" >>$@ @echo "Depends: $(PY25-YENC_DEPENDS)" >>$@ @echo "Conflicts: $(PY-YENC_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(PY-YENC_IPK_DIR)/opt/sbin or $(PY-YENC_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(PY-YENC_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(PY-YENC_IPK_DIR)/opt/etc/py-yenc/... # Documentation files should be installed in $(PY-YENC_IPK_DIR)/opt/doc/py-yenc/... # Daemon startup scripts should be installed in $(PY-YENC_IPK_DIR)/opt/etc/init.d/S??py-yenc # # You may need to patch your application to make it use these locations. # $(PY24-YENC_IPK): $(PY-YENC_BUILD_DIR)/.built rm -rf $(BUILD_DIR)/py-yenc_*_$(TARGET_ARCH).ipk rm -rf $(PY24-YENC_IPK_DIR) $(BUILD_DIR)/py24-yenc_*_$(TARGET_ARCH).ipk cd $(PY-YENC_BUILD_DIR)/2.4; \ $(TARGET_CONFIGURE_OPTS) LDSHARED='$(TARGET_CC) -shared' \ $(HOST_STAGING_PREFIX)/bin/python2.4 setup.py install --root=$(PY24-YENC_IPK_DIR) --prefix=/opt $(STRIP_COMMAND) $(PY24-YENC_IPK_DIR)/opt/lib/python2.4/site-packages/*.so $(MAKE) $(PY24-YENC_IPK_DIR)/CONTROL/control # echo $(PY-YENC_CONFFILES) | sed -e 's/ /\n/g' > $(PY24-YENC_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(PY24-YENC_IPK_DIR) $(PY25-YENC_IPK): $(PY-YENC_BUILD_DIR)/.built rm -rf $(PY25-YENC_IPK_DIR) $(BUILD_DIR)/py25-yenc_*_$(TARGET_ARCH).ipk cd $(PY-YENC_BUILD_DIR)/2.5; \ $(TARGET_CONFIGURE_OPTS) LDSHARED='$(TARGET_CC) -shared' \ $(HOST_STAGING_PREFIX)/bin/python2.5 setup.py install --root=$(PY25-YENC_IPK_DIR) --prefix=/opt $(STRIP_COMMAND) $(PY25-YENC_IPK_DIR)/opt/lib/python2.5/site-packages/*.so $(MAKE) $(PY25-YENC_IPK_DIR)/CONTROL/control # echo $(PY-YENC_CONFFILES) | sed -e 's/ /\n/g' > $(PY25-YENC_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(PY25-YENC_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # py-yenc-ipk: $(PY24-YENC_IPK) $(PY25-YENC_IPK) # # This is called from the top level makefile to clean all of the built files. # py-yenc-clean: -$(MAKE) -C $(PY-YENC_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # py-yenc-dirclean: rm -rf $(BUILD_DIR)/$(PY-YENC_DIR) $(PY-YENC_BUILD_DIR) rm -rf $(PY24-YENC_IPK_DIR) $(PY24-YENC_IPK) rm -rf $(PY25-YENC_IPK_DIR) $(PY25-YENC_IPK) # # Some sanity check for the package. # py-yenc-check: $(PY24-YENC_IPK) $(PY25-YENC_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $(PY24-YENC_IPK) $(PY25-YENC_IPK)