########################################################### # # py-elementtree # ########################################################### # # PY-ELEMENTTREE_VERSION, PY-ELEMENTTREE_SITE and PY-ELEMENTTREE_SOURCE define # the upstream location of the source code for the package. # PY-ELEMENTTREE_DIR is the directory which is created when the source # archive is unpacked. # PY-ELEMENTTREE_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # PY-ELEMENTTREE_SITE=http://effbot.org/downloads PY-ELEMENTTREE_VERSION=1.2.6-20050316 PY-ELEMENTTREE_SOURCE=elementtree-$(PY-ELEMENTTREE_VERSION).tar.gz PY-ELEMENTTREE_DIR=elementtree-$(PY-ELEMENTTREE_VERSION) PY-ELEMENTTREE_UNZIP=zcat PY-ELEMENTTREE_MAINTAINER=NSLU2 Linux PY-ELEMENTTREE_DESCRIPTION=A toolkit that contains a number of light-weight components for working with XML. PY-ELEMENTTREE_SECTION=misc PY-ELEMENTTREE_PRIORITY=optional PY24-ELEMENTTREE_DEPENDS=python24 PY25-ELEMENTTREE_DEPENDS=python25 PY-ELEMENTTREE_CONFLICTS= # # PY-ELEMENTTREE_IPK_VERSION should be incremented when the ipk changes. # PY-ELEMENTTREE_IPK_VERSION=5 # # PY-ELEMENTTREE_CONFFILES should be a list of user-editable files #PY-ELEMENTTREE_CONFFILES=/opt/etc/py-elementtree.conf /opt/etc/init.d/SXXpy-elementtree # # PY-ELEMENTTREE_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # #PY-ELEMENTTREE_PATCHES=$(PY-ELEMENTTREE_SOURCE_DIR)/configure.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # PY-ELEMENTTREE_CPPFLAGS= PY-ELEMENTTREE_LDFLAGS= # # PY-ELEMENTTREE_BUILD_DIR is the directory in which the build is done. # PY-ELEMENTTREE_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # PY-ELEMENTTREE_IPK_DIR is the directory in which the ipk is built. # PY-ELEMENTTREE_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # PY-ELEMENTTREE_BUILD_DIR=$(BUILD_DIR)/py-elementtree PY-ELEMENTTREE_SOURCE_DIR=$(SOURCE_DIR)/py-elementtree PY24-ELEMENTTREE_IPK_DIR=$(BUILD_DIR)/py24-elementtree-$(PY-ELEMENTTREE_VERSION)-ipk PY24-ELEMENTTREE_IPK=$(BUILD_DIR)/py24-elementtree_$(PY-ELEMENTTREE_VERSION)-$(PY-ELEMENTTREE_IPK_VERSION)_$(TARGET_ARCH).ipk PY25-ELEMENTTREE_IPK_DIR=$(BUILD_DIR)/py25-elementtree-$(PY-ELEMENTTREE_VERSION)-ipk PY25-ELEMENTTREE_IPK=$(BUILD_DIR)/py25-elementtree_$(PY-ELEMENTTREE_VERSION)-$(PY-ELEMENTTREE_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: py-elementtree-source py-elementtree-unpack py-elementtree py-elementtree-stage py-elementtree-ipk py-elementtree-clean py-elementtree-dirclean py-elementtree-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(PY-ELEMENTTREE_SOURCE): $(WGET) -P $(DL_DIR) $(PY-ELEMENTTREE_SITE)/$(PY-ELEMENTTREE_SOURCE) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # py-elementtree-source: $(DL_DIR)/$(PY-ELEMENTTREE_SOURCE) $(PY-ELEMENTTREE_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # $(PY-ELEMENTTREE_BUILD_DIR)/.configured: $(DL_DIR)/$(PY-ELEMENTTREE_SOURCE) $(PY-ELEMENTTREE_PATCHES) $(MAKE) py-setuptools-stage rm -rf $(PY-ELEMENTTREE_BUILD_DIR) mkdir -p $(PY-ELEMENTTREE_BUILD_DIR) # 2.4 rm -rf $(BUILD_DIR)/$(PY-ELEMENTTREE_DIR) $(PY-ELEMENTTREE_UNZIP) $(DL_DIR)/$(PY-ELEMENTTREE_SOURCE) | tar -C $(BUILD_DIR) -xvf - # cat $(PY-ELEMENTTREE_PATCHES) | patch -d $(BUILD_DIR)/$(PY-ELEMENTTREE_DIR) -p1 mv $(BUILD_DIR)/$(PY-ELEMENTTREE_DIR) $(PY-ELEMENTTREE_BUILD_DIR)/2.4 (cd $(PY-ELEMENTTREE_BUILD_DIR)/2.4; \ (echo "[build_scripts]"; \ echo "executable=/opt/bin/python2.4") > setup.cfg \ ) # 2.5 rm -rf $(BUILD_DIR)/$(PY-ELEMENTTREE_DIR) $(PY-ELEMENTTREE_UNZIP) $(DL_DIR)/$(PY-ELEMENTTREE_SOURCE) | tar -C $(BUILD_DIR) -xvf - # cat $(PY-ELEMENTTREE_PATCHES) | patch -d $(BUILD_DIR)/$(PY-ELEMENTTREE_DIR) -p1 mv $(BUILD_DIR)/$(PY-ELEMENTTREE_DIR) $(PY-ELEMENTTREE_BUILD_DIR)/2.5 (cd $(PY-ELEMENTTREE_BUILD_DIR)/2.5; \ (echo "[build_scripts]"; \ echo "executable=/opt/bin/python2.5") > setup.cfg \ ) touch $@ py-elementtree-unpack: $(PY-ELEMENTTREE_BUILD_DIR)/.configured # # This builds the actual binary. # $(PY-ELEMENTTREE_BUILD_DIR)/.built: $(PY-ELEMENTTREE_BUILD_DIR)/.configured rm -f $@ # $(MAKE) -C $(PY-ELEMENTTREE_BUILD_DIR) touch $@ # # This is the build convenience target. # py-elementtree: $(PY-ELEMENTTREE_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(PY-ELEMENTTREE_BUILD_DIR)/.staged: $(PY-ELEMENTTREE_BUILD_DIR)/.built rm -f $@ (cd $(PY-ELEMENTTREE_BUILD_DIR)/2.4; \ PYTHONPATH=$(STAGING_LIB_DIR)/python2.4/site-packages \ $(HOST_STAGING_PREFIX)/bin/python2.4 -c "import setuptools; execfile('setup.py')" \ install --root=$(STAGING_DIR) --prefix=/opt) touch $@ py-elementtree-stage: $(PY-ELEMENTTREE_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/py-elementtree # $(PY24-ELEMENTTREE_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: py24-elementtree" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(PY-ELEMENTTREE_PRIORITY)" >>$@ @echo "Section: $(PY-ELEMENTTREE_SECTION)" >>$@ @echo "Version: $(PY-ELEMENTTREE_VERSION)-$(PY-ELEMENTTREE_IPK_VERSION)" >>$@ @echo "Maintainer: $(PY-ELEMENTTREE_MAINTAINER)" >>$@ @echo "Source: $(PY-ELEMENTTREE_SITE)/$(PY-ELEMENTTREE_SOURCE)" >>$@ @echo "Description: $(PY-ELEMENTTREE_DESCRIPTION)" >>$@ @echo "Depends: $(PY24-ELEMENTTREE_DEPENDS)" >>$@ @echo "Conflicts: $(PY-ELEMENTTREE_CONFLICTS)" >>$@ $(PY25-ELEMENTTREE_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: py25-elementtree" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(PY-ELEMENTTREE_PRIORITY)" >>$@ @echo "Section: $(PY-ELEMENTTREE_SECTION)" >>$@ @echo "Version: $(PY-ELEMENTTREE_VERSION)-$(PY-ELEMENTTREE_IPK_VERSION)" >>$@ @echo "Maintainer: $(PY-ELEMENTTREE_MAINTAINER)" >>$@ @echo "Source: $(PY-ELEMENTTREE_SITE)/$(PY-ELEMENTTREE_SOURCE)" >>$@ @echo "Description: $(PY-ELEMENTTREE_DESCRIPTION)" >>$@ @echo "Depends: $(PY25-ELEMENTTREE_DEPENDS)" >>$@ @echo "Conflicts: $(PY-ELEMENTTREE_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(PY-ELEMENTTREE_IPK_DIR)/opt/sbin or $(PY-ELEMENTTREE_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(PY-ELEMENTTREE_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(PY-ELEMENTTREE_IPK_DIR)/opt/etc/py-elementtree/... # Documentation files should be installed in $(PY-ELEMENTTREE_IPK_DIR)/opt/doc/py-elementtree/... # Daemon startup scripts should be installed in $(PY-ELEMENTTREE_IPK_DIR)/opt/etc/init.d/S??py-elementtree # # You may need to patch your application to make it use these locations. # $(PY24-ELEMENTTREE_IPK): $(PY-ELEMENTTREE_BUILD_DIR)/.built rm -rf $(BUILD_DIR)/py-elementtree_*_$(TARGET_ARCH).ipk rm -rf $(PY24-ELEMENTTREE_IPK_DIR) $(BUILD_DIR)/py24-elementtree_*_$(TARGET_ARCH).ipk (cd $(PY-ELEMENTTREE_BUILD_DIR)/2.4; \ PYTHONPATH=$(STAGING_LIB_DIR)/python2.4/site-packages \ $(HOST_STAGING_PREFIX)/bin/python2.4 -c "import setuptools; execfile('setup.py')" \ install --root=$(PY24-ELEMENTTREE_IPK_DIR) --prefix=/opt) $(MAKE) $(PY24-ELEMENTTREE_IPK_DIR)/CONTROL/control # echo $(PY-ELEMENTTREE_CONFFILES) | sed -e 's/ /\n/g' > $(PY24-ELEMENTTREE_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(PY24-ELEMENTTREE_IPK_DIR) $(PY25-ELEMENTTREE_IPK): $(PY-ELEMENTTREE_BUILD_DIR)/.built rm -rf $(PY25-ELEMENTTREE_IPK_DIR) $(BUILD_DIR)/py25-elementtree_*_$(TARGET_ARCH).ipk (cd $(PY-ELEMENTTREE_BUILD_DIR)/2.5; \ PYTHONPATH=$(STAGING_LIB_DIR)/python2.5/site-packages \ $(HOST_STAGING_PREFIX)/bin/python2.5 -c "import setuptools; execfile('setup.py')" \ install --root=$(PY25-ELEMENTTREE_IPK_DIR) --prefix=/opt) $(MAKE) $(PY25-ELEMENTTREE_IPK_DIR)/CONTROL/control # echo $(PY-ELEMENTTREE_CONFFILES) | sed -e 's/ /\n/g' > $(PY25-ELEMENTTREE_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(PY25-ELEMENTTREE_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # py-elementtree-ipk: $(PY24-ELEMENTTREE_IPK) $(PY25-ELEMENTTREE_IPK) # # This is called from the top level makefile to clean all of the built files. # py-elementtree-clean: -$(MAKE) -C $(PY-ELEMENTTREE_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # py-elementtree-dirclean: rm -rf $(BUILD_DIR)/$(PY-ELEMENTTREE_DIR) $(PY-ELEMENTTREE_BUILD_DIR) rm -rf $(PY24-ELEMENTTREE_IPK_DIR) $(PY24-ELEMENTTREE_IPK) rm -rf $(PY25-ELEMENTTREE_IPK_DIR) $(PY25-ELEMENTTREE_IPK) # # Some sanity check for the package. # py-elementtree-check: $(PY24-ELEMENTTREE_IPK) $(PY25-ELEMENTTREE_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $(PY24-ELEMENTTREE_IPK) $(PY25-ELEMENTTREE_IPK)