########################################################### # # perl-hottproxy # ########################################################### # # PERL_HOTTPROXY_VERSION, PERL_HOTTPROXY_SITE and PERL_HOTTPROXY_SOURCE define # the upstream location of the source code for the package. # PERL_HOTTPROXY_DIR is the directory which is created when the source # archive is unpacked. # PERL_HOTTPROXY_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # PERL_HOTTPROXY_SITE=http://www.hottproxy.org/downloads/ PERL_HOTTPROXY_VERSION=0.24.0.0 PERL_HOTTPROXY_SOURCE=HoTTProxy-Source-$(PERL_HOTTPROXY_VERSION).tar.gz PERL_HOTTPROXY_DIR=perl-hottproxy-$(PERL_HOTTPROXY_VERSION) PERL_HOTTPROXY_UNZIP=zcat PERL_HOTTPROXY_MAINTAINER=NSLU2 Linux PERL_HOTTPROXY_DESCRIPTION=HTTP proxy targeted specifically toward serving the needs of wireless Internet devices (cell phones, PDAs, etc.). PERL_HOTTPROXY_SECTION=net PERL_HOTTPROXY_PRIORITY=optional PERL_HOTTPROXY_DEPENDS=perl PERL_HOTTPROXY_SUGGESTS= PERL_HOTTPROXY_CONFLICTS= # # PERL_HOTTPROXY_IPK_VERSION should be incremented when the ipk changes. # PERL_HOTTPROXY_IPK_VERSION=1 # # PERL_HOTTPROXY_CONFFILES should be a list of user-editable files PERL_HOTTPROXY_CONFFILES=/opt/share/hottproxy/HoTTProxy_Admin.conf /opt/share/hottproxy/HoTTProxy.conf #/init.d/SXXperl-hottproxy # # PERL_HOTTPROXY_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # #PERL_HOTTPROXY_PATCHES=$(PERL_HOTTPROXY_SOURCE_DIR)/configure.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # PERL_HOTTPROXY_CPPFLAGS= PERL_HOTTPROXY_LDFLAGS= # # PERL_HOTTPROXY_BUILD_DIR is the directory in which the build is done. # PERL_HOTTPROXY_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # PERL_HOTTPROXY_IPK_DIR is the directory in which the ipk is built. # PERL_HOTTPROXY_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # PERL_HOTTPROXY_BUILD_DIR=$(BUILD_DIR)/perl-hottproxy PERL_HOTTPROXY_SOURCE_DIR=$(SOURCE_DIR)/perl-hottproxy PERL_HOTTPROXY_IPK_DIR=$(BUILD_DIR)/perl-hottproxy-$(PERL_HOTTPROXY_VERSION)-ipk PERL_HOTTPROXY_IPK=$(BUILD_DIR)/perl-hottproxy_$(PERL_HOTTPROXY_VERSION)-$(PERL_HOTTPROXY_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: perl-hottproxy-source perl-hottproxy-unpack perl-hottproxy perl-hottproxy-stage perl-hottproxy-ipk perl-hottproxy-clean perl-hottproxy-dirclean perl-hottproxy-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(PERL_HOTTPROXY_SOURCE): $(WGET) -P $(DL_DIR) $(PERL_HOTTPROXY_SITE)/$(PERL_HOTTPROXY_SOURCE) || \ $(WGET) -P $(DL_DIR) $(SOURCES_NLO_SITE)/$(PERL_HOTTPROXY_SOURCE) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # perl-hottproxy-source: $(DL_DIR)/$(PERL_HOTTPROXY_SOURCE) $(PERL_HOTTPROXY_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # $(PERL_HOTTPROXY_BUILD_DIR)/.configured: $(DL_DIR)/$(PERL_HOTTPROXY_SOURCE) $(PERL_HOTTPROXY_PATCHES) make/perl-hottproxy.mk # $(MAKE) -stage -stage rm -rf $(BUILD_DIR)/$(PERL_HOTTPROXY_DIR) $(PERL_HOTTPROXY_BUILD_DIR) install -d $(BUILD_DIR)/$(PERL_HOTTPROXY_DIR) $(PERL_HOTTPROXY_UNZIP) $(DL_DIR)/$(PERL_HOTTPROXY_SOURCE) | tar -C $(BUILD_DIR)/$(PERL_HOTTPROXY_DIR) -xvf - if test -n "$(PERL_HOTTPROXY_PATCHES)" ; \ then cat $(PERL_HOTTPROXY_PATCHES) | \ patch -d $(BUILD_DIR)/$(PERL_HOTTPROXY_DIR) -p0 ; \ fi if test "$(BUILD_DIR)/$(PERL_HOTTPROXY_DIR)" != "$(PERL_HOTTPROXY_BUILD_DIR)" ; \ then mv $(BUILD_DIR)/$(PERL_HOTTPROXY_DIR) $(PERL_HOTTPROXY_BUILD_DIR) ; \ fi # (cd $(PERL_HOTTPROXY_BUILD_DIR); \ # sed -i -e 's|HoTTProxy.conf|/opt/etc/HoTTProxy.conf|' \ # HoTTProxy.pl HoTTProxy/UI.pm ; \ # sed -i -e 's|HoTTProxy_Admin.conf|/opt/etc/HoTTProxy_Admin.conf|' \ # HoTTProxy_Admin.pl ; \ # sed -i -e 's|src=\\"/|src=\\"/HoTTProxy/|g' HoTTProxy/UI.pm ;\ # ) # $(PATCH_LIBTOOL) $(PERL_HOTTPROXY_BUILD_DIR)/libtool touch $@ perl-hottproxy-unpack: $(PERL_HOTTPROXY_BUILD_DIR)/.configured # # This builds the actual binary. # $(PERL_HOTTPROXY_BUILD_DIR)/.built: $(PERL_HOTTPROXY_BUILD_DIR)/.configured rm -f $@ # $(MAKE) -C $(PERL_HOTTPROXY_BUILD_DIR) touch $@ # # This is the build convenience target. # perl-hottproxy: $(PERL_HOTTPROXY_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(PERL_HOTTPROXY_BUILD_DIR)/.staged: $(PERL_HOTTPROXY_BUILD_DIR)/.built rm -f $@ # $(MAKE) -C $(PERL_HOTTPROXY_BUILD_DIR) DESTDIR=$(STAGING_DIR) install touch $@ perl-hottproxy-stage: $(PERL_HOTTPROXY_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/perl-hottproxy # $(PERL_HOTTPROXY_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: perl-hottproxy" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(PERL_HOTTPROXY_PRIORITY)" >>$@ @echo "Section: $(PERL_HOTTPROXY_SECTION)" >>$@ @echo "Version: $(PERL_HOTTPROXY_VERSION)-$(PERL_HOTTPROXY_IPK_VERSION)" >>$@ @echo "Maintainer: $(PERL_HOTTPROXY_MAINTAINER)" >>$@ @echo "Source: $(PERL_HOTTPROXY_SITE)/$(PERL_HOTTPROXY_SOURCE)" >>$@ @echo "Description: $(PERL_HOTTPROXY_DESCRIPTION)" >>$@ @echo "Depends: $(PERL_HOTTPROXY_DEPENDS)" >>$@ @echo "Suggests: $(PERL_HOTTPROXY_SUGGESTS)" >>$@ @echo "Conflicts: $(PERL_HOTTPROXY_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(PERL_HOTTPROXY_IPK_DIR)/opt/sbin or $(PERL_HOTTPROXY_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(PERL_HOTTPROXY_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(PERL_HOTTPROXY_IPK_DIR)/opt/etc/perl-hottproxy/... # Documentation files should be installed in $(PERL_HOTTPROXY_IPK_DIR)/opt/doc/perl-hottproxy/... # Daemon startup scripts should be installed in $(PERL_HOTTPROXY_IPK_DIR)/opt/etc/init.d/S??perl-hottproxy # # You may need to patch your application to make it use these locations. # $(PERL_HOTTPROXY_IPK): $(PERL_HOTTPROXY_BUILD_DIR)/.built rm -rf $(PERL_HOTTPROXY_IPK_DIR) $(BUILD_DIR)/perl-hottproxy_*_$(TARGET_ARCH).ipk install -d $(PERL_HOTTPROXY_IPK_DIR)/opt/share/hottproxy tar -c -C $(PERL_HOTTPROXY_BUILD_DIR) -f - . | tar -xv -C $(PERL_HOTTPROXY_IPK_DIR)/opt/share/hottproxy -f - # install -m 644 $(PERL_HOTTPROXY_SOURCE_DIR)/perl-hottproxy.conf $(PERL_HOTTPROXY_IPK_DIR)/opt/etc/perl-hottproxy.conf # install -d $(PERL_HOTTPROXY_IPK_DIR)/opt/etc/init.d # install -m 755 $(PERL_HOTTPROXY_SOURCE_DIR)/rc.perl-hottproxy $(PERL_HOTTPROXY_IPK_DIR)/opt/etc/init.d/SXXperl-hottproxy # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(PERL_HOTTPROXY_IPK_DIR)/opt/etc/init.d/SXXperl-hottproxy $(MAKE) $(PERL_HOTTPROXY_IPK_DIR)/CONTROL/control # install -m 755 $(PERL_HOTTPROXY_SOURCE_DIR)/postinst $(PERL_HOTTPROXY_IPK_DIR)/CONTROL/postinst # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(PERL_HOTTPROXY_IPK_DIR)/CONTROL/postinst # install -m 755 $(PERL_HOTTPROXY_SOURCE_DIR)/prerm $(PERL_HOTTPROXY_IPK_DIR)/CONTROL/prerm # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(PERL_HOTTPROXY_IPK_DIR)/CONTROL/prerm echo $(PERL_HOTTPROXY_CONFFILES) | sed -e 's/ /\n/g' > $(PERL_HOTTPROXY_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(PERL_HOTTPROXY_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # perl-hottproxy-ipk: $(PERL_HOTTPROXY_IPK) # # This is called from the top level makefile to clean all of the built files. # perl-hottproxy-clean: rm -f $(PERL_HOTTPROXY_BUILD_DIR)/.built -$(MAKE) -C $(PERL_HOTTPROXY_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # perl-hottproxy-dirclean: rm -rf $(BUILD_DIR)/$(PERL_HOTTPROXY_DIR) $(PERL_HOTTPROXY_BUILD_DIR) $(PERL_HOTTPROXY_IPK_DIR) $(PERL_HOTTPROXY_IPK) # # # Some sanity check for the package. # perl-hottproxy-check: $(PERL_HOTTPROXY_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $(PERL_HOTTPROXY_IPK)