########################################################### # # pal # ########################################################### # # PAL_VERSION, PAL_SITE and PAL_SOURCE define # the upstream location of the source code for the package. # PAL_DIR is the directory which is created when the source # archive is unpacked. # PAL_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # PAL_SITE=http://$(SOURCEFORGE_MIRROR)/sourceforge/palcal PAL_VERSION=0.3.4 PAL_SOURCE=pal-$(PAL_VERSION).tgz PAL_DIR=pal-$(PAL_VERSION) PAL_UNZIP=zcat PAL_MAINTAINER=NSLU2 Linux PAL_DESCRIPTION=pal is a command-line calendar program that can keep track of events. PAL_SECTION=utils PAL_PRIORITY=optional PAL_DEPENDS=glib, ncurses, readline PAL_SUGGESTS= PAL_CONFLICTS= # # PAL_IPK_VERSION should be incremented when the ipk changes. # PAL_IPK_VERSION=2 # # PAL_CONFFILES should be a list of user-editable files #PAL_CONFFILES=/opt/etc/pal.conf /opt/etc/init.d/SXXpal # # PAL_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # #PAL_PATCHES=$(PAL_SOURCE_DIR)/configure.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # PAL_CPPFLAGS= PAL_LDFLAGS=-lglib-2.0 -lreadline -lncurses # # PAL_BUILD_DIR is the directory in which the build is done. # PAL_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # PAL_IPK_DIR is the directory in which the ipk is built. # PAL_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # PAL_BUILD_DIR=$(BUILD_DIR)/pal PAL_SOURCE_DIR=$(SOURCE_DIR)/pal PAL_IPK_DIR=$(BUILD_DIR)/pal-$(PAL_VERSION)-ipk PAL_IPK=$(BUILD_DIR)/pal_$(PAL_VERSION)-$(PAL_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: pal-source pal-unpack pal pal-stage pal-ipk pal-clean pal-dirclean pal-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(PAL_SOURCE): $(WGET) -P $(@D) $(PAL_SITE)/$(@F) || \ $(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # pal-source: $(DL_DIR)/$(PAL_SOURCE) $(PAL_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # $(PAL_BUILD_DIR)/.configured: $(DL_DIR)/$(PAL_SOURCE) $(PAL_PATCHES) make/pal.mk $(MAKE) glib-stage ncurses-stage readline-stage rm -rf $(BUILD_DIR)/$(PAL_DIR) $(@D) $(PAL_UNZIP) $(DL_DIR)/$(PAL_SOURCE) | tar -C $(BUILD_DIR) -xvf - if test -n "$(PAL_PATCHES)" ; \ then cat $(PAL_PATCHES) | \ patch -d $(BUILD_DIR)/$(PAL_DIR) -p0 ; \ fi if test "$(BUILD_DIR)/$(PAL_DIR)" != "$(@D)" ; \ then mv $(BUILD_DIR)/$(PAL_DIR) $(@D) ; \ fi sed -i -e 's/strip /: /' \ -e 's/-o root//' \ -e 's|-I$${prefix}/include ||' \ $(@D)/src/Makefile sed -i -e 's|/etc|/opt/etc|' $(@D)/src/input.c $(@D)/src/Makefile # (cd $(PAL_BUILD_DIR); \ $(TARGET_CONFIGURE_OPTS) \ CPPFLAGS="$(STAGING_CPPFLAGS) $(PAL_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(PAL_LDFLAGS)" \ ./configure \ --build=$(GNU_HOST_NAME) \ --host=$(GNU_TARGET_NAME) \ --target=$(GNU_TARGET_NAME) \ --prefix=/opt \ --disable-nls \ --disable-static \ ) touch $@ pal-unpack: $(PAL_BUILD_DIR)/.configured # # This builds the actual binary. # $(PAL_BUILD_DIR)/.built: $(PAL_BUILD_DIR)/.configured rm -f $@ PKG_CONFIG_PATH=$(STAGING_LIB_DIR)/pkgconfig \ $(MAKE) -C $(@D)/src \ $(TARGET_CONFIGURE_OPTS) \ CPPFLAGS="$(STAGING_CPPFLAGS) $(PAL_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(PAL_LDFLAGS)" \ LIBDIR="$(STAGING_LDFLAGS) $(PAL_LDFLAGS)" \ prefix=/opt \ ; touch $@ # # This is the build convenience target. # pal: $(PAL_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # #$(PAL_BUILD_DIR)/.staged: $(PAL_BUILD_DIR)/.built # rm -f $@ # $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install # touch $@ # #pal-stage: $(PAL_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/pal # $(PAL_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: pal" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(PAL_PRIORITY)" >>$@ @echo "Section: $(PAL_SECTION)" >>$@ @echo "Version: $(PAL_VERSION)-$(PAL_IPK_VERSION)" >>$@ @echo "Maintainer: $(PAL_MAINTAINER)" >>$@ @echo "Source: $(PAL_SITE)/$(PAL_SOURCE)" >>$@ @echo "Description: $(PAL_DESCRIPTION)" >>$@ @echo "Depends: $(PAL_DEPENDS)" >>$@ @echo "Suggests: $(PAL_SUGGESTS)" >>$@ @echo "Conflicts: $(PAL_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(PAL_IPK_DIR)/opt/sbin or $(PAL_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(PAL_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(PAL_IPK_DIR)/opt/etc/pal/... # Documentation files should be installed in $(PAL_IPK_DIR)/opt/doc/pal/... # Daemon startup scripts should be installed in $(PAL_IPK_DIR)/opt/etc/init.d/S??pal # # You may need to patch your application to make it use these locations. # $(PAL_IPK): $(PAL_BUILD_DIR)/.built rm -rf $(PAL_IPK_DIR) $(BUILD_DIR)/pal_*_$(TARGET_ARCH).ipk $(MAKE) -C $(PAL_BUILD_DIR)/src install-no-rm \ DESTDIR=$(PAL_IPK_DIR) \ prefix=/opt \ ; $(STRIP_COMMAND) $(PAL_IPK_DIR)/opt/bin/pal # install -d $(PAL_IPK_DIR)/opt/etc/ # install -m 644 $(PAL_SOURCE_DIR)/pal.conf $(PAL_IPK_DIR)/opt/etc/pal.conf # install -d $(PAL_IPK_DIR)/opt/etc/init.d # install -m 755 $(PAL_SOURCE_DIR)/rc.pal $(PAL_IPK_DIR)/opt/etc/init.d/SXXpal # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(PAL_IPK_DIR)/opt/etc/init.d/SXXpal $(MAKE) $(PAL_IPK_DIR)/CONTROL/control # install -m 755 $(PAL_SOURCE_DIR)/postinst $(PAL_IPK_DIR)/CONTROL/postinst # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(PAL_IPK_DIR)/CONTROL/postinst # install -m 755 $(PAL_SOURCE_DIR)/prerm $(PAL_IPK_DIR)/CONTROL/prerm # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(PAL_IPK_DIR)/CONTROL/prerm echo $(PAL_CONFFILES) | sed -e 's/ /\n/g' > $(PAL_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(PAL_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # pal-ipk: $(PAL_IPK) # # This is called from the top level makefile to clean all of the built files. # pal-clean: rm -f $(PAL_BUILD_DIR)/.built -$(MAKE) -C $(PAL_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # pal-dirclean: rm -rf $(BUILD_DIR)/$(PAL_DIR) $(PAL_BUILD_DIR) $(PAL_IPK_DIR) $(PAL_IPK) # # # Some sanity check for the package. # pal-check: $(PAL_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $^