########################################################### # # openobex # ########################################################### # # OPENOBEX_VERSION, OPENOBEX_SITE and OPENOBEX_SOURCE define # the upstream location of the source code for the package. # OPENOBEX_DIR is the directory which is created when the source # archive is unpacked. # OPENOBEX_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # OPENOBEX_SITE=http://$(SOURCEFORGE_MIRROR)/sourceforge/openobex OPENOBEX_VERSION=1.3 OPENOBEX_SOURCE=openobex-$(OPENOBEX_VERSION).tar.gz OPENOBEX_DIR=openobex-$(OPENOBEX_VERSION) OPENOBEX_UNZIP=zcat OPENOBEX_MAINTAINER=NSLU2 Linux OPENOBEX_DESCRIPTION=Free open source implementation of the Object Exchange (OBEX) protocol. OPENOBEX_SECTION=net OPENOBEX_PRIORITY=optional OPENOBEX_DEPENDS= OPENOBEX_SUGGESTS= OPENOBEX_CONFLICTS= # # OPENOBEX_IPK_VERSION should be incremented when the ipk changes. # OPENOBEX_IPK_VERSION=1 # # OPENOBEX_CONFFILES should be a list of user-editable files #OPENOBEX_CONFFILES=/opt/etc/openobex.conf /opt/etc/init.d/SXXopenobex # # OPENOBEX_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # #OPENOBEX_PATCHES=$(OPENOBEX_SOURCE_DIR)/configure.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # OPENOBEX_CPPFLAGS= OPENOBEX_LDFLAGS= # # OPENOBEX_BUILD_DIR is the directory in which the build is done. # OPENOBEX_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # OPENOBEX_IPK_DIR is the directory in which the ipk is built. # OPENOBEX_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # OPENOBEX_BUILD_DIR=$(BUILD_DIR)/openobex OPENOBEX_SOURCE_DIR=$(SOURCE_DIR)/openobex OPENOBEX_IPK_DIR=$(BUILD_DIR)/openobex-$(OPENOBEX_VERSION)-ipk OPENOBEX_IPK=$(BUILD_DIR)/openobex_$(OPENOBEX_VERSION)-$(OPENOBEX_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: openobex-source openobex-unpack openobex openobex-stage openobex-ipk openobex-clean openobex-dirclean openobex-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(OPENOBEX_SOURCE): $(WGET) -P $(DL_DIR) $(OPENOBEX_SITE)/$(OPENOBEX_SOURCE) || \ $(WGET) -P $(DL_DIR) $(SOURCES_NLO_SITE)/$(OPENOBEX_SOURCE) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # openobex-source: $(DL_DIR)/$(OPENOBEX_SOURCE) $(OPENOBEX_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # $(OPENOBEX_BUILD_DIR)/.configured: $(DL_DIR)/$(OPENOBEX_SOURCE) $(OPENOBEX_PATCHES) make/openobex.mk # $(MAKE) -stage -stage rm -rf $(BUILD_DIR)/$(OPENOBEX_DIR) $(OPENOBEX_BUILD_DIR) $(OPENOBEX_UNZIP) $(DL_DIR)/$(OPENOBEX_SOURCE) | tar -C $(BUILD_DIR) -xvf - if test -n "$(OPENOBEX_PATCHES)" ; \ then cat $(OPENOBEX_PATCHES) | \ patch -d $(BUILD_DIR)/$(OPENOBEX_DIR) -p0 ; \ fi if test "$(BUILD_DIR)/$(OPENOBEX_DIR)" != "$(OPENOBEX_BUILD_DIR)" ; \ then mv $(BUILD_DIR)/$(OPENOBEX_DIR) $(OPENOBEX_BUILD_DIR) ; \ fi cp $(SOURCE_DIR)/common/config.sub $(SOURCE_DIR)/common/config.guess $(OPENOBEX_BUILD_DIR) (cd $(OPENOBEX_BUILD_DIR); \ $(TARGET_CONFIGURE_OPTS) \ CPPFLAGS="$(STAGING_CPPFLAGS) $(OPENOBEX_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(OPENOBEX_LDFLAGS)" \ PKG_CONFIG_PATH="$(STAGING_LIB_DIR)/pkgconfig" \ PKG_CONFIG_LIBDIR="$(STAGING_LIB_DIR)/pkgconfig" \ ac_cv_file__opt_lib_pkgconfig_libusb_pc=yes \ ./configure \ --build=$(GNU_HOST_NAME) \ --host=$(GNU_TARGET_NAME) \ --target=$(GNU_TARGET_NAME) \ --prefix=/opt \ --disable-nls \ --disable-static \ --enable-shared \ ) $(PATCH_LIBTOOL) $(OPENOBEX_BUILD_DIR)/libtool touch $@ openobex-unpack: $(OPENOBEX_BUILD_DIR)/.configured # # This builds the actual binary. # $(OPENOBEX_BUILD_DIR)/.built: $(OPENOBEX_BUILD_DIR)/.configured rm -f $@ $(MAKE) -C $(OPENOBEX_BUILD_DIR) touch $@ # # This is the build convenience target. # openobex: $(OPENOBEX_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(OPENOBEX_BUILD_DIR)/.staged: $(OPENOBEX_BUILD_DIR)/.built rm -f $@ $(MAKE) -C $(OPENOBEX_BUILD_DIR) DESTDIR=$(STAGING_DIR) install sed -i -e 's|^prefix=.*|prefix=$(STAGING_PREFIX)|' $(STAGING_LIB_DIR)/pkgconfig/openobex.pc rm -f $(STAGING_LIB_DIR)/libopenobex.la touch $@ openobex-stage: $(OPENOBEX_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/openobex # $(OPENOBEX_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: openobex" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(OPENOBEX_PRIORITY)" >>$@ @echo "Section: $(OPENOBEX_SECTION)" >>$@ @echo "Version: $(OPENOBEX_VERSION)-$(OPENOBEX_IPK_VERSION)" >>$@ @echo "Maintainer: $(OPENOBEX_MAINTAINER)" >>$@ @echo "Source: $(OPENOBEX_SITE)/$(OPENOBEX_SOURCE)" >>$@ @echo "Description: $(OPENOBEX_DESCRIPTION)" >>$@ @echo "Depends: $(OPENOBEX_DEPENDS)" >>$@ @echo "Suggests: $(OPENOBEX_SUGGESTS)" >>$@ @echo "Conflicts: $(OPENOBEX_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(OPENOBEX_IPK_DIR)/opt/sbin or $(OPENOBEX_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(OPENOBEX_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(OPENOBEX_IPK_DIR)/opt/etc/openobex/... # Documentation files should be installed in $(OPENOBEX_IPK_DIR)/opt/doc/openobex/... # Daemon startup scripts should be installed in $(OPENOBEX_IPK_DIR)/opt/etc/init.d/S??openobex # # You may need to patch your application to make it use these locations. # $(OPENOBEX_IPK): $(OPENOBEX_BUILD_DIR)/.built rm -rf $(OPENOBEX_IPK_DIR) $(BUILD_DIR)/openobex_*_$(TARGET_ARCH).ipk $(MAKE) -C $(OPENOBEX_BUILD_DIR) DESTDIR=$(OPENOBEX_IPK_DIR) install-strip rm -f $(OPENOBEX_IPK_DIR)/opt/lib/libopenobex.la # install -d $(OPENOBEX_IPK_DIR)/opt/etc/ # install -m 644 $(OPENOBEX_SOURCE_DIR)/openobex.conf $(OPENOBEX_IPK_DIR)/opt/etc/openobex.conf # install -d $(OPENOBEX_IPK_DIR)/opt/etc/init.d # install -m 755 $(OPENOBEX_SOURCE_DIR)/rc.openobex $(OPENOBEX_IPK_DIR)/opt/etc/init.d/SXXopenobex # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(OPENOBEX_IPK_DIR)/opt/etc/init.d/SXXopenobex $(MAKE) $(OPENOBEX_IPK_DIR)/CONTROL/control # install -m 755 $(OPENOBEX_SOURCE_DIR)/postinst $(OPENOBEX_IPK_DIR)/CONTROL/postinst # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(OPENOBEX_IPK_DIR)/CONTROL/postinst # install -m 755 $(OPENOBEX_SOURCE_DIR)/prerm $(OPENOBEX_IPK_DIR)/CONTROL/prerm # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(OPENOBEX_IPK_DIR)/CONTROL/prerm echo $(OPENOBEX_CONFFILES) | sed -e 's/ /\n/g' > $(OPENOBEX_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(OPENOBEX_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # openobex-ipk: $(OPENOBEX_IPK) # # This is called from the top level makefile to clean all of the built files. # openobex-clean: rm -f $(OPENOBEX_BUILD_DIR)/.built -$(MAKE) -C $(OPENOBEX_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # openobex-dirclean: rm -rf $(BUILD_DIR)/$(OPENOBEX_DIR) $(OPENOBEX_BUILD_DIR) $(OPENOBEX_IPK_DIR) $(OPENOBEX_IPK) # # # Some sanity check for the package. # openobex-check: $(OPENOBEX_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $(OPENOBEX_IPK)