########################################################### # # libosip2 # ########################################################### # You must replace "libosip2" and "LIBOSIP2" with the lower case name and # upper case name of your new package. Some places below will say # "Do not change this" - that does not include this global change, # which must always be done to ensure we have unique names. # # LIBOSIP2_VERSION, LIBOSIP2_SITE and LIBOSIP2_SOURCE define # the upstream location of the source code for the package. # LIBOSIP2_DIR is the directory which is created when the source # archive is unpacked. # LIBOSIP2_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # LIBOSIP2_SITE=http://ftp.gnu.org/gnu/osip LIBOSIP2_VERSION=3.3.0 LIBOSIP2_SOURCE=libosip2-$(LIBOSIP2_VERSION).tar.gz LIBOSIP2_DIR=libosip2-$(LIBOSIP2_VERSION) LIBOSIP2_UNZIP=zcat LIBOSIP2_MAINTAINER=NSLU2 Linux LIBOSIP2_DESCRIPTION=oSIP library is an implementation of SIP - rfc3261 LIBOSIP2_SECTION=lib LIBOSIP2_PRIORITY=optional LIBOSIP2_DEPENDS= LIBOSIP2_CONFLICTS= # # LIBOSIP2_IPK_VERSION should be incremented when the ipk changes. # LIBOSIP2_IPK_VERSION=2 # # LIBOSIP2_CONFFILES should be a list of user-editable files #LIBOSIP2_CONFFILES=/opt/etc/libosip2.conf /opt/etc/init.d/SXXlibosip2 # # LIBOSIP2_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # #LIBOSIP2_PATCHES=$(LIBOSIP2_SOURCE_DIR)/configure.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # LIBOSIP2_CPPFLAGS= LIBOSIP2_LDFLAGS= # # LIBOSIP2_BUILD_DIR is the directory in which the build is done. # LIBOSIP2_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # LIBOSIP2_IPK_DIR is the directory in which the ipk is built. # LIBOSIP2_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # LIBOSIP2_BUILD_DIR=$(BUILD_DIR)/libosip2 LIBOSIP2_SOURCE_DIR=$(SOURCE_DIR)/libosip2 LIBOSIP2_IPK_DIR=$(BUILD_DIR)/libosip2-$(LIBOSIP2_VERSION)-ipk LIBOSIP2_IPK=$(BUILD_DIR)/libosip2_$(LIBOSIP2_VERSION)-$(LIBOSIP2_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: libosip2-source libosip2-unpack libosip2 libosip2-stage libosip2-ipk libosip2-clean libosip2-dirclean libosip2-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(LIBOSIP2_SOURCE): $(WGET) -P $(@D) $(LIBOSIP2_SITE)/$(@F) || \ $(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # libosip2-source: $(DL_DIR)/$(LIBOSIP2_SOURCE) $(LIBOSIP2_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # $(LIBOSIP2_BUILD_DIR)/.configured: $(DL_DIR)/$(LIBOSIP2_SOURCE) $(LIBOSIP2_PATCHES) make/libosip2.mk # $(MAKE) -stage -stage rm -rf $(BUILD_DIR)/$(LIBOSIP2_DIR) $(LIBOSIP2_BUILD_DIR) $(LIBOSIP2_UNZIP) $(DL_DIR)/$(LIBOSIP2_SOURCE) | tar -C $(BUILD_DIR) -xvf - # cat $(LIBOSIP2_PATCHES) | patch -d $(BUILD_DIR)/$(LIBOSIP2_DIR) -p1 mv $(BUILD_DIR)/$(LIBOSIP2_DIR) $(@D) (cd $(@D); \ $(TARGET_CONFIGURE_OPTS) \ CPPFLAGS="$(STAGING_CPPFLAGS) $(LIBOSIP2_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(LIBOSIP2_LDFLAGS)" \ ./configure \ --build=$(GNU_HOST_NAME) \ --host=$(GNU_TARGET_NAME) \ --target=$(GNU_TARGET_NAME) \ --prefix=/opt \ --disable-nls \ --disable-static \ ) touch $@ libosip2-unpack: $(LIBOSIP2_BUILD_DIR)/.configured # # This builds the actual binary. # $(LIBOSIP2_BUILD_DIR)/.built: $(LIBOSIP2_BUILD_DIR)/.configured rm -f $@ $(MAKE) -C $(@D) touch $@ # # This is the build convenience target. # libosip2: $(LIBOSIP2_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(LIBOSIP2_BUILD_DIR)/.staged: $(LIBOSIP2_BUILD_DIR)/.built rm -f $@ rm -f $(STAGING_LIB_DIR)/libosip* $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install rm -f $(STAGING_LIB_DIR)/libosip*.la $(STAGING_LIB_DIR)/libosip*.a sed -i -e 's|^prefix=.*|prefix=$(STAGING_PREFIX)|' $(STAGING_LIB_DIR)/pkgconfig/libosip2.pc touch $@ libosip2-stage: $(LIBOSIP2_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/libosip2 # $(LIBOSIP2_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: libosip2" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(LIBOSIP2_PRIORITY)" >>$@ @echo "Section: $(LIBOSIP2_SECTION)" >>$@ @echo "Version: $(LIBOSIP2_VERSION)-$(LIBOSIP2_IPK_VERSION)" >>$@ @echo "Maintainer: $(LIBOSIP2_MAINTAINER)" >>$@ @echo "Source: $(LIBOSIP2_SITE)/$(LIBOSIP2_SOURCE)" >>$@ @echo "Description: $(LIBOSIP2_DESCRIPTION)" >>$@ @echo "Depends: $(LIBOSIP2_DEPENDS)" >>$@ @echo "Conflicts: $(LIBOSIP2_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(LIBOSIP2_IPK_DIR)/opt/sbin or $(LIBOSIP2_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(LIBOSIP2_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(LIBOSIP2_IPK_DIR)/opt/etc/libosip2/... # Documentation files should be installed in $(LIBOSIP2_IPK_DIR)/opt/doc/libosip2/... # Daemon startup scripts should be installed in $(LIBOSIP2_IPK_DIR)/opt/etc/init.d/S??libosip2 # # You may need to patch your application to make it use these locations. # $(LIBOSIP2_IPK): $(LIBOSIP2_BUILD_DIR)/.built rm -rf $(LIBOSIP2_IPK_DIR) $(BUILD_DIR)/libosip2_*_$(TARGET_ARCH).ipk $(MAKE) -C $(LIBOSIP2_BUILD_DIR) DESTDIR=$(LIBOSIP2_IPK_DIR) install-strip # install -d $(LIBOSIP2_IPK_DIR)/opt/etc/ # install -m 644 $(LIBOSIP2_SOURCE_DIR)/libosip2.conf $(LIBOSIP2_IPK_DIR)/opt/etc/libosip2.conf # install -d $(LIBOSIP2_IPK_DIR)/opt/etc/init.d # install -m 755 $(LIBOSIP2_SOURCE_DIR)/rc.libosip2 $(LIBOSIP2_IPK_DIR)/opt/etc/init.d/SXXlibosip2 $(MAKE) $(LIBOSIP2_IPK_DIR)/CONTROL/control # install -m 755 $(LIBOSIP2_SOURCE_DIR)/postinst $(LIBOSIP2_IPK_DIR)/CONTROL/postinst # install -m 755 $(LIBOSIP2_SOURCE_DIR)/prerm $(LIBOSIP2_IPK_DIR)/CONTROL/prerm # echo $(LIBOSIP2_CONFFILES) | sed -e 's/ /\n/g' > $(LIBOSIP2_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(LIBOSIP2_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # libosip2-ipk: $(LIBOSIP2_IPK) # # This is called from the top level makefile to clean all of the built files. # libosip2-clean: rm -f $(LIBOSIP2_BUILD_DIR)/.built -$(MAKE) -C $(LIBOSIP2_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # libosip2-dirclean: rm -rf $(BUILD_DIR)/$(LIBOSIP2_DIR) $(LIBOSIP2_BUILD_DIR) $(LIBOSIP2_IPK_DIR) $(LIBOSIP2_IPK) # # Some sanity check for the package. # libosip2-check: $(LIBOSIP2_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $^