########################################################### # # libopensync # ########################################################### # # LIBOPENSYNC_VERSION, LIBOPENSYNC_SITE and LIBOPENSYNC_SOURCE define # the upstream location of the source code for the package. # LIBOPENSYNC_DIR is the directory which is created when the source # archive is unpacked. # LIBOPENSYNC_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # LIBOPENSYNC_SITE=http://www.opensync.org/attachment/wiki/download LIBOPENSYNC_VERSION=0.22 LIBOPENSYNC_SOURCE=libopensync-$(LIBOPENSYNC_VERSION).tar.bz2 LIBOPENSYNC_DIR=libopensync-$(LIBOPENSYNC_VERSION) LIBOPENSYNC_UNZIP=bzcat LIBOPENSYNC_MAINTAINER=NSLU2 Linux LIBOPENSYNC_DESCRIPTION=A synchronization engine. LIBOPENSYNC_SECTION=misc LIBOPENSYNC_PRIORITY=optional LIBOPENSYNC_DEPENDS=glib, libxml2, sqlite ifeq (libiconv, $(filter libiconv, $(PACKAGES))) LIBOPENSYNC_DEPENDS+=, libiconv endif LIBOPENSYNC_SUGGESTS= LIBOPENSYNC_CONFLICTS= # # LIBOPENSYNC_IPK_VERSION should be incremented when the ipk changes. # LIBOPENSYNC_IPK_VERSION=1 # # LIBOPENSYNC_CONFFILES should be a list of user-editable files #LIBOPENSYNC_CONFFILES=/opt/etc/libopensync.conf /opt/etc/init.d/SXXlibopensync # # LIBOPENSYNC_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # #LIBOPENSYNC_PATCHES=$(LIBOPENSYNC_SOURCE_DIR)/configure.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # LIBOPENSYNC_CPPFLAGS= LIBOPENSYNC_LDFLAGS= # # LIBOPENSYNC_BUILD_DIR is the directory in which the build is done. # LIBOPENSYNC_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # LIBOPENSYNC_IPK_DIR is the directory in which the ipk is built. # LIBOPENSYNC_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # LIBOPENSYNC_BUILD_DIR=$(BUILD_DIR)/libopensync LIBOPENSYNC_SOURCE_DIR=$(SOURCE_DIR)/libopensync LIBOPENSYNC_IPK_DIR=$(BUILD_DIR)/libopensync-$(LIBOPENSYNC_VERSION)-ipk LIBOPENSYNC_IPK=$(BUILD_DIR)/libopensync_$(LIBOPENSYNC_VERSION)-$(LIBOPENSYNC_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: libopensync-source libopensync-unpack libopensync libopensync-stage libopensync-ipk libopensync-clean libopensync-dirclean libopensync-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(LIBOPENSYNC_SOURCE): $(WGET) -O $(DL_DIR)/$(LIBOPENSYNC_SOURCE) "$(LIBOPENSYNC_SITE)/$(LIBOPENSYNC_SOURCE)?rev=&format=raw" || \ $(WGET) -P $(DL_DIR) $(SOURCES_NLO_SITE)/$(LIBOPENSYNC_SOURCE) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # libopensync-source: $(DL_DIR)/$(LIBOPENSYNC_SOURCE) $(LIBOPENSYNC_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # $(LIBOPENSYNC_BUILD_DIR)/.configured: $(DL_DIR)/$(LIBOPENSYNC_SOURCE) $(LIBOPENSYNC_PATCHES) make/libopensync.mk $(MAKE) glib-stage ifeq (libiconv, $(filter libiconv, $(PACKAGES))) $(MAKE) libiconv-stage endif $(MAKE) libxml2-stage $(MAKE) sqlite-stage rm -rf $(BUILD_DIR)/$(LIBOPENSYNC_DIR) $(LIBOPENSYNC_BUILD_DIR) $(LIBOPENSYNC_UNZIP) $(DL_DIR)/$(LIBOPENSYNC_SOURCE) | tar -C $(BUILD_DIR) -xvf - if test -n "$(LIBOPENSYNC_PATCHES)" ; \ then cat $(LIBOPENSYNC_PATCHES) | \ patch -d $(BUILD_DIR)/$(LIBOPENSYNC_DIR) -p0 ; \ fi if test "$(BUILD_DIR)/$(LIBOPENSYNC_DIR)" != "$(LIBOPENSYNC_BUILD_DIR)" ; \ then mv $(BUILD_DIR)/$(LIBOPENSYNC_DIR) $(LIBOPENSYNC_BUILD_DIR) ; \ fi ifeq (libiconv, $(filter libiconv, $(PACKAGES))) sed -i -e 's/#ifdef SOLARIS/#if 1/' $(LIBOPENSYNC_BUILD_DIR)/formats/vformats-xml/vformat.c endif (cd $(LIBOPENSYNC_BUILD_DIR); \ $(TARGET_CONFIGURE_OPTS) \ CPPFLAGS="$(STAGING_CPPFLAGS) $(LIBOPENSYNC_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(LIBOPENSYNC_LDFLAGS)" \ PKG_CONFIG_PATH=$(STAGING_LIB_DIR)/pkgconfig \ ./configure \ --build=$(GNU_HOST_NAME) \ --host=$(GNU_TARGET_NAME) \ --target=$(GNU_TARGET_NAME) \ --prefix=/opt \ --disable-python \ --disable-nls \ --disable-static \ ) $(PATCH_LIBTOOL) $(LIBOPENSYNC_BUILD_DIR)/libtool touch $@ libopensync-unpack: $(LIBOPENSYNC_BUILD_DIR)/.configured # # This builds the actual binary. # $(LIBOPENSYNC_BUILD_DIR)/.built: $(LIBOPENSYNC_BUILD_DIR)/.configured rm -f $@ $(MAKE) -C $(LIBOPENSYNC_BUILD_DIR) touch $@ # # This is the build convenience target. # libopensync: $(LIBOPENSYNC_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(LIBOPENSYNC_BUILD_DIR)/.staged: $(LIBOPENSYNC_BUILD_DIR)/.built rm -f $@ $(MAKE) -C $(LIBOPENSYNC_BUILD_DIR) DESTDIR=$(STAGING_DIR) install rm -f $(STAGING_LIB_DIR)/libopensync.la $(STAGING_LIB_DIR)/libosengine.la sed -i -e 's|^prefix=.*|prefix=$(STAGING_PREFIX)|' \ $(STAGING_LIB_DIR)/pkgconfig/opensync-*.pc \ $(STAGING_LIB_DIR)/pkgconfig/osengine-*.pc touch $@ libopensync-stage: $(LIBOPENSYNC_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/libopensync # $(LIBOPENSYNC_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: libopensync" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(LIBOPENSYNC_PRIORITY)" >>$@ @echo "Section: $(LIBOPENSYNC_SECTION)" >>$@ @echo "Version: $(LIBOPENSYNC_VERSION)-$(LIBOPENSYNC_IPK_VERSION)" >>$@ @echo "Maintainer: $(LIBOPENSYNC_MAINTAINER)" >>$@ @echo "Source: $(LIBOPENSYNC_SITE)/$(LIBOPENSYNC_SOURCE)" >>$@ @echo "Description: $(LIBOPENSYNC_DESCRIPTION)" >>$@ @echo "Depends: $(LIBOPENSYNC_DEPENDS)" >>$@ @echo "Suggests: $(LIBOPENSYNC_SUGGESTS)" >>$@ @echo "Conflicts: $(LIBOPENSYNC_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(LIBOPENSYNC_IPK_DIR)/opt/sbin or $(LIBOPENSYNC_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(LIBOPENSYNC_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(LIBOPENSYNC_IPK_DIR)/opt/etc/libopensync/... # Documentation files should be installed in $(LIBOPENSYNC_IPK_DIR)/opt/doc/libopensync/... # Daemon startup scripts should be installed in $(LIBOPENSYNC_IPK_DIR)/opt/etc/init.d/S??libopensync # # You may need to patch your application to make it use these locations. # $(LIBOPENSYNC_IPK): $(LIBOPENSYNC_BUILD_DIR)/.built rm -rf $(LIBOPENSYNC_IPK_DIR) $(BUILD_DIR)/libopensync_*_$(TARGET_ARCH).ipk $(MAKE) -C $(LIBOPENSYNC_BUILD_DIR) DESTDIR=$(LIBOPENSYNC_IPK_DIR) install-strip rm -f $(LIBOPENSYNC_IPK_DIR)/opt/lib/*.la # install -d $(LIBOPENSYNC_IPK_DIR)/opt/etc/ # install -m 644 $(LIBOPENSYNC_SOURCE_DIR)/libopensync.conf $(LIBOPENSYNC_IPK_DIR)/opt/etc/libopensync.conf # install -d $(LIBOPENSYNC_IPK_DIR)/opt/etc/init.d # install -m 755 $(LIBOPENSYNC_SOURCE_DIR)/rc.libopensync $(LIBOPENSYNC_IPK_DIR)/opt/etc/init.d/SXXlibopensync # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(LIBOPENSYNC_IPK_DIR)/opt/etc/init.d/SXXlibopensync $(MAKE) $(LIBOPENSYNC_IPK_DIR)/CONTROL/control # install -m 755 $(LIBOPENSYNC_SOURCE_DIR)/postinst $(LIBOPENSYNC_IPK_DIR)/CONTROL/postinst # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(LIBOPENSYNC_IPK_DIR)/CONTROL/postinst # install -m 755 $(LIBOPENSYNC_SOURCE_DIR)/prerm $(LIBOPENSYNC_IPK_DIR)/CONTROL/prerm # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(LIBOPENSYNC_IPK_DIR)/CONTROL/prerm echo $(LIBOPENSYNC_CONFFILES) | sed -e 's/ /\n/g' > $(LIBOPENSYNC_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(LIBOPENSYNC_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # libopensync-ipk: $(LIBOPENSYNC_IPK) # # This is called from the top level makefile to clean all of the built files. # libopensync-clean: rm -f $(LIBOPENSYNC_BUILD_DIR)/.built -$(MAKE) -C $(LIBOPENSYNC_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # libopensync-dirclean: rm -rf $(BUILD_DIR)/$(LIBOPENSYNC_DIR) $(LIBOPENSYNC_BUILD_DIR) $(LIBOPENSYNC_IPK_DIR) $(LIBOPENSYNC_IPK) # # # Some sanity check for the package. # libopensync-check: $(LIBOPENSYNC_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $(LIBOPENSYNC_IPK)