########################################################### # # libinklevel # ########################################################### # # LIBINKLEVEL_VERSION, LIBINKLEVEL_SITE and LIBINKLEVEL_SOURCE define # the upstream location of the source code for the package. # LIBINKLEVEL_DIR is the directory which is created when the source # archive is unpacked. # LIBINKLEVEL_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # LIBINKLEVEL_SITE=http://$(SOURCEFORGE_MIRROR)/sourceforge/libinklevel LIBINKLEVEL_VERSION=0.8.0 LIBINKLEVEL_SOURCE=libinklevel-$(LIBINKLEVEL_VERSION).tar.gz LIBINKLEVEL_DIR=libinklevel-$(LIBINKLEVEL_VERSION) LIBINKLEVEL_UNZIP=zcat LIBINKLEVEL_MAINTAINER=NSLU2 Linux LIBINKLEVEL_DESCRIPTION=A library for checking the ink level of your printer. LIBINKLEVEL_SECTION=print LIBINKLEVEL_PRIORITY=optional LIBINKLEVEL_DEPENDS=libieee1284 LIBINKLEVEL_SUGGESTS= LIBINKLEVEL_CONFLICTS= # # LIBINKLEVEL_IPK_VERSION should be incremented when the ipk changes. # LIBINKLEVEL_IPK_VERSION=1 # # LIBINKLEVEL_CONFFILES should be a list of user-editable files #LIBINKLEVEL_CONFFILES=/opt/etc/libinklevel.conf /opt/etc/init.d/SXXlibinklevel # # LIBINKLEVEL_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # #LIBINKLEVEL_PATCHES=$(LIBINKLEVEL_SOURCE_DIR)/configure.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # LIBINKLEVEL_CPPFLAGS= LIBINKLEVEL_LDFLAGS= # # LIBINKLEVEL_BUILD_DIR is the directory in which the build is done. # LIBINKLEVEL_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # LIBINKLEVEL_IPK_DIR is the directory in which the ipk is built. # LIBINKLEVEL_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # LIBINKLEVEL_BUILD_DIR=$(BUILD_DIR)/libinklevel LIBINKLEVEL_SOURCE_DIR=$(SOURCE_DIR)/libinklevel LIBINKLEVEL_IPK_DIR=$(BUILD_DIR)/libinklevel-$(LIBINKLEVEL_VERSION)-ipk LIBINKLEVEL_IPK=$(BUILD_DIR)/libinklevel_$(LIBINKLEVEL_VERSION)-$(LIBINKLEVEL_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: libinklevel-source libinklevel-unpack libinklevel libinklevel-stage libinklevel-ipk libinklevel-clean libinklevel-dirclean libinklevel-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(LIBINKLEVEL_SOURCE): $(WGET) -P $(@D) $(LIBINKLEVEL_SITE)/$(@F) || \ $(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # libinklevel-source: $(DL_DIR)/$(LIBINKLEVEL_SOURCE) $(LIBINKLEVEL_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # $(LIBINKLEVEL_BUILD_DIR)/.configured: $(DL_DIR)/$(LIBINKLEVEL_SOURCE) $(LIBINKLEVEL_PATCHES) make/libinklevel.mk $(MAKE) libieee1284-stage rm -rf $(BUILD_DIR)/$(LIBINKLEVEL_DIR) $(@D) $(LIBINKLEVEL_UNZIP) $(DL_DIR)/$(LIBINKLEVEL_SOURCE) | tar -C $(BUILD_DIR) -xvf - if test -n "$(LIBINKLEVEL_PATCHES)" ; \ then cat $(LIBINKLEVEL_PATCHES) | \ patch -d $(BUILD_DIR)/$(LIBINKLEVEL_DIR) -p0 ; \ fi if test "$(BUILD_DIR)/$(LIBINKLEVEL_DIR)" != "$(@D)" ; \ then mv $(BUILD_DIR)/$(LIBINKLEVEL_DIR) $(@D) ; \ fi # sed -i -e 's| -shared|& $$(LDFLAGS)|' $(@D)/Makefile (cd $(@D); \ $(TARGET_CONFIGURE_OPTS) \ CPPFLAGS="$(STAGING_CPPFLAGS) $(LIBINKLEVEL_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(LIBINKLEVEL_LDFLAGS)" \ ac_cv_func_malloc_0_nonnull=yes \ ac_cv_func_realloc_0_nonnull=yes \ ./configure \ --build=$(GNU_HOST_NAME) \ --host=$(GNU_TARGET_NAME) \ --target=$(GNU_TARGET_NAME) \ --prefix=/opt \ --disable-nls \ --disable-static \ ) $(PATCH_LIBTOOL) $(@D)/libtool touch $@ libinklevel-unpack: $(LIBINKLEVEL_BUILD_DIR)/.configured # # This builds the actual binary. # $(LIBINKLEVEL_BUILD_DIR)/.built: $(LIBINKLEVEL_BUILD_DIR)/.configured rm -f $@ $(MAKE) -C $(@D) touch $@ # # This is the build convenience target. # libinklevel: $(LIBINKLEVEL_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(LIBINKLEVEL_BUILD_DIR)/.staged: $(LIBINKLEVEL_BUILD_DIR)/.built rm -f $@ $(MAKE) -C $(@D) install \ DESTDIR=$(STAGING_DIR) PREFIX=/opt rm -f $(STAGING_LIB_DIR)/libinklevel.la touch $@ libinklevel-stage: $(LIBINKLEVEL_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/libinklevel # $(LIBINKLEVEL_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: libinklevel" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(LIBINKLEVEL_PRIORITY)" >>$@ @echo "Section: $(LIBINKLEVEL_SECTION)" >>$@ @echo "Version: $(LIBINKLEVEL_VERSION)-$(LIBINKLEVEL_IPK_VERSION)" >>$@ @echo "Maintainer: $(LIBINKLEVEL_MAINTAINER)" >>$@ @echo "Source: $(LIBINKLEVEL_SITE)/$(LIBINKLEVEL_SOURCE)" >>$@ @echo "Description: $(LIBINKLEVEL_DESCRIPTION)" >>$@ @echo "Depends: $(LIBINKLEVEL_DEPENDS)" >>$@ @echo "Suggests: $(LIBINKLEVEL_SUGGESTS)" >>$@ @echo "Conflicts: $(LIBINKLEVEL_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(LIBINKLEVEL_IPK_DIR)/opt/sbin or $(LIBINKLEVEL_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(LIBINKLEVEL_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(LIBINKLEVEL_IPK_DIR)/opt/etc/libinklevel/... # Documentation files should be installed in $(LIBINKLEVEL_IPK_DIR)/opt/doc/libinklevel/... # Daemon startup scripts should be installed in $(LIBINKLEVEL_IPK_DIR)/opt/etc/init.d/S??libinklevel # # You may need to patch your application to make it use these locations. # $(LIBINKLEVEL_IPK): $(LIBINKLEVEL_BUILD_DIR)/.built rm -rf $(LIBINKLEVEL_IPK_DIR) $(BUILD_DIR)/libinklevel_*_$(TARGET_ARCH).ipk $(MAKE) -C $(LIBINKLEVEL_BUILD_DIR) install \ DESTDIR=$(LIBINKLEVEL_IPK_DIR) PREFIX=/opt $(STRIP_COMMAND) $(LIBINKLEVEL_IPK_DIR)/opt/lib/libinklevel.so # install -d $(LIBINKLEVEL_IPK_DIR)/opt/etc/ # install -m 644 $(LIBINKLEVEL_SOURCE_DIR)/libinklevel.conf $(LIBINKLEVEL_IPK_DIR)/opt/etc/libinklevel.conf # install -d $(LIBINKLEVEL_IPK_DIR)/opt/etc/init.d # install -m 755 $(LIBINKLEVEL_SOURCE_DIR)/rc.libinklevel $(LIBINKLEVEL_IPK_DIR)/opt/etc/init.d/SXXlibinklevel # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(LIBINKLEVEL_IPK_DIR)/opt/etc/init.d/SXXlibinklevel $(MAKE) $(LIBINKLEVEL_IPK_DIR)/CONTROL/control # install -m 755 $(LIBINKLEVEL_SOURCE_DIR)/postinst $(LIBINKLEVEL_IPK_DIR)/CONTROL/postinst # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(LIBINKLEVEL_IPK_DIR)/CONTROL/postinst # install -m 755 $(LIBINKLEVEL_SOURCE_DIR)/prerm $(LIBINKLEVEL_IPK_DIR)/CONTROL/prerm # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(LIBINKLEVEL_IPK_DIR)/CONTROL/prerm # if test -n "$(UPD-ALT_PREFIX)"; then \ sed -i -e '/^[ ]*update-alternatives /s|update-alternatives|$(UPD-ALT_PREFIX)/bin/&|' \ $(LIBINKLEVEL_IPK_DIR)/CONTROL/postinst $(LIBINKLEVEL_IPK_DIR)/CONTROL/prerm; \ fi echo $(LIBINKLEVEL_CONFFILES) | sed -e 's/ /\n/g' > $(LIBINKLEVEL_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(LIBINKLEVEL_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # libinklevel-ipk: $(LIBINKLEVEL_IPK) # # This is called from the top level makefile to clean all of the built files. # libinklevel-clean: rm -f $(LIBINKLEVEL_BUILD_DIR)/.built -$(MAKE) -C $(LIBINKLEVEL_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # libinklevel-dirclean: rm -rf $(BUILD_DIR)/$(LIBINKLEVEL_DIR) $(LIBINKLEVEL_BUILD_DIR) $(LIBINKLEVEL_IPK_DIR) $(LIBINKLEVEL_IPK) # # # Some sanity check for the package. # libinklevel-check: $(LIBINKLEVEL_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $^