########################################################### # # libexosip2 # ########################################################### # # LIBEXOSIP2_VERSION, LIBEXOSIP2_SITE and LIBEXOSIP2_SOURCE define # the upstream location of the source code for the package. # LIBEXOSIP2_DIR is the directory which is created when the source # archive is unpacked. # LIBEXOSIP2_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # LIBEXOSIP2_SITE=http://download.savannah.gnu.org/releases-noredirect/exosip LIBEXOSIP2_VERSION=3.3.0 LIBEXOSIP2_SOURCE=libeXosip2-$(LIBEXOSIP2_VERSION).tar.gz LIBEXOSIP2_DIR=libeXosip2-$(LIBEXOSIP2_VERSION) LIBEXOSIP2_UNZIP=zcat LIBEXOSIP2_MAINTAINER=NSLU2 Linux LIBEXOSIP2_DESCRIPTION=The eXtended osip library. LIBEXOSIP2_SECTION=lib LIBEXOSIP2_PRIORITY=optional LIBEXOSIP2_DEPENDS=libosip2 LIBEXOSIP2_SUGGESTS= LIBEXOSIP2_CONFLICTS= # # LIBEXOSIP2_IPK_VERSION should be incremented when the ipk changes. # LIBEXOSIP2_IPK_VERSION=1 # # LIBEXOSIP2_CONFFILES should be a list of user-editable files #LIBEXOSIP2_CONFFILES=/opt/etc/libexosip2.conf /opt/etc/init.d/SXXlibexosip2 # # LIBEXOSIP2_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # #LIBEXOSIP2_PATCHES=$(LIBEXOSIP2_SOURCE_DIR)/configure.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # LIBEXOSIP2_CPPFLAGS= LIBEXOSIP2_LDFLAGS= # # LIBEXOSIP2_BUILD_DIR is the directory in which the build is done. # LIBEXOSIP2_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # LIBEXOSIP2_IPK_DIR is the directory in which the ipk is built. # LIBEXOSIP2_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # LIBEXOSIP2_BUILD_DIR=$(BUILD_DIR)/libexosip2 LIBEXOSIP2_SOURCE_DIR=$(SOURCE_DIR)/libexosip2 LIBEXOSIP2_IPK_DIR=$(BUILD_DIR)/libexosip2-$(LIBEXOSIP2_VERSION)-ipk LIBEXOSIP2_IPK=$(BUILD_DIR)/libexosip2_$(LIBEXOSIP2_VERSION)-$(LIBEXOSIP2_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: libexosip2-source libexosip2-unpack libexosip2 libexosip2-stage libexosip2-ipk libexosip2-clean libexosip2-dirclean libexosip2-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(LIBEXOSIP2_SOURCE): $(WGET) -P $(@D) $(LIBEXOSIP2_SITE)/$(@F) || \ $(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # libexosip2-source: $(DL_DIR)/$(LIBEXOSIP2_SOURCE) $(LIBEXOSIP2_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # $(LIBEXOSIP2_BUILD_DIR)/.configured: $(DL_DIR)/$(LIBEXOSIP2_SOURCE) $(LIBEXOSIP2_PATCHES) make/libexosip2.mk $(MAKE) libosip2-stage rm -rf $(BUILD_DIR)/$(LIBEXOSIP2_DIR) $(@D) $(LIBEXOSIP2_UNZIP) $(DL_DIR)/$(LIBEXOSIP2_SOURCE) | tar -C $(BUILD_DIR) -xvf - if test -n "$(LIBEXOSIP2_PATCHES)" ; \ then cat $(LIBEXOSIP2_PATCHES) | \ patch -d $(BUILD_DIR)/$(LIBEXOSIP2_DIR) -p0 ; \ fi if test "$(BUILD_DIR)/$(LIBEXOSIP2_DIR)" != "$(@D)" ; \ then mv $(BUILD_DIR)/$(LIBEXOSIP2_DIR) $(@D) ; \ fi (cd $(@D); \ $(TARGET_CONFIGURE_OPTS) \ CPPFLAGS="$(STAGING_CPPFLAGS) $(LIBEXOSIP2_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(LIBEXOSIP2_LDFLAGS)" \ PKG_CONFIG_PATH="$(STAGING_LIB_DIR)/pkgconfig" \ ./configure \ --build=$(GNU_HOST_NAME) \ --host=$(GNU_TARGET_NAME) \ --target=$(GNU_TARGET_NAME) \ --prefix=/opt \ --disable-nls \ --disable-static \ ) $(PATCH_LIBTOOL) $(@D)/libtool touch $@ libexosip2-unpack: $(LIBEXOSIP2_BUILD_DIR)/.configured # # This builds the actual binary. # $(LIBEXOSIP2_BUILD_DIR)/.built: $(LIBEXOSIP2_BUILD_DIR)/.configured rm -f $@ $(MAKE) -C $(@D) touch $@ # # This is the build convenience target. # libexosip2: $(LIBEXOSIP2_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(LIBEXOSIP2_BUILD_DIR)/.staged: $(LIBEXOSIP2_BUILD_DIR)/.built rm -f $@ $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install rm -f $(STAGING_LIB_DIR)/libeXosip2.la touch $@ libexosip2-stage: $(LIBEXOSIP2_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/libexosip2 # $(LIBEXOSIP2_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: libexosip2" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(LIBEXOSIP2_PRIORITY)" >>$@ @echo "Section: $(LIBEXOSIP2_SECTION)" >>$@ @echo "Version: $(LIBEXOSIP2_VERSION)-$(LIBEXOSIP2_IPK_VERSION)" >>$@ @echo "Maintainer: $(LIBEXOSIP2_MAINTAINER)" >>$@ @echo "Source: $(LIBEXOSIP2_SITE)/$(LIBEXOSIP2_SOURCE)" >>$@ @echo "Description: $(LIBEXOSIP2_DESCRIPTION)" >>$@ @echo "Depends: $(LIBEXOSIP2_DEPENDS)" >>$@ @echo "Suggests: $(LIBEXOSIP2_SUGGESTS)" >>$@ @echo "Conflicts: $(LIBEXOSIP2_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(LIBEXOSIP2_IPK_DIR)/opt/sbin or $(LIBEXOSIP2_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(LIBEXOSIP2_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(LIBEXOSIP2_IPK_DIR)/opt/etc/libexosip2/... # Documentation files should be installed in $(LIBEXOSIP2_IPK_DIR)/opt/doc/libexosip2/... # Daemon startup scripts should be installed in $(LIBEXOSIP2_IPK_DIR)/opt/etc/init.d/S??libexosip2 # # You may need to patch your application to make it use these locations. # $(LIBEXOSIP2_IPK): $(LIBEXOSIP2_BUILD_DIR)/.built rm -rf $(LIBEXOSIP2_IPK_DIR) $(BUILD_DIR)/libexosip2_*_$(TARGET_ARCH).ipk $(MAKE) -C $(LIBEXOSIP2_BUILD_DIR) DESTDIR=$(LIBEXOSIP2_IPK_DIR) install-strip $(MAKE) $(LIBEXOSIP2_IPK_DIR)/CONTROL/control echo $(LIBEXOSIP2_CONFFILES) | sed -e 's/ /\n/g' > $(LIBEXOSIP2_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(LIBEXOSIP2_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # libexosip2-ipk: $(LIBEXOSIP2_IPK) # # This is called from the top level makefile to clean all of the built files. # libexosip2-clean: rm -f $(LIBEXOSIP2_BUILD_DIR)/.built -$(MAKE) -C $(LIBEXOSIP2_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # libexosip2-dirclean: rm -rf $(BUILD_DIR)/$(LIBEXOSIP2_DIR) $(LIBEXOSIP2_BUILD_DIR) $(LIBEXOSIP2_IPK_DIR) $(LIBEXOSIP2_IPK) # # # Some sanity check for the package. # libexosip2-check: $(LIBEXOSIP2_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $^