########################################################### # # iftop # ########################################################### # # IFTOP_VERSION, IFTOP_SITE and IFTOP_SOURCE define # the upstream location of the source code for the package. # IFTOP_DIR is the directory which is created when the source # archive is unpacked. # IFTOP_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # IFTOP_SITE=http://www.ex-parrot.com/~pdw/iftop/download IFTOP_VERSION=0.17 IFTOP_SOURCE=iftop-$(IFTOP_VERSION).tar.gz IFTOP_DIR=iftop-$(IFTOP_VERSION) IFTOP_UNZIP=zcat IFTOP_MAINTAINER=NSLU2 Linux IFTOP_DESCRIPTION=Display bandwidth usage on an interface by host IFTOP_SECTION=net IFTOP_PRIORITY=optional IFTOP_DEPENDS=ncurses, libpcap IFTOP_SUGGESTS= IFTOP_CONFLICTS= # # IFTOP_IPK_VERSION should be incremented when the ipk changes. # IFTOP_IPK_VERSION=4 # # IFTOP_CONFFILES should be a list of user-editable files IFTOP_CONFFILES=/opt/etc/iftop.conf /opt/etc/init.d/SXXiftop # # IFTOP_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # ifeq ($(TARGET_ARCH), $(filter armeb powerpc, $(TARGET_ARCH))) IFTOP_PATCHES=$(IFTOP_SOURCE_DIR)/big-endian.patch endif # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # IFTOP_CPPFLAGS=-I$(STAGING_INCLUDE_DIR)/ncurses IFTOP_LDFLAGS= # # IFTOP_BUILD_DIR is the directory in which the build is done. # IFTOP_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # IFTOP_IPK_DIR is the directory in which the ipk is built. # IFTOP_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # IFTOP_BUILD_DIR=$(BUILD_DIR)/iftop IFTOP_SOURCE_DIR=$(SOURCE_DIR)/iftop IFTOP_IPK_DIR=$(BUILD_DIR)/iftop-$(IFTOP_VERSION)-ipk IFTOP_IPK=$(BUILD_DIR)/iftop_$(IFTOP_VERSION)-$(IFTOP_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: iftop-source iftop-unpack iftop iftop-stage iftop-ipk iftop-clean iftop-dirclean iftop-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(IFTOP_SOURCE): $(WGET) -P $(@D) $(IFTOP_SITE)/$(@F) || \ $(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # iftop-source: $(DL_DIR)/$(IFTOP_SOURCE) $(IFTOP_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # $(IFTOP_BUILD_DIR)/.configured: $(DL_DIR)/$(IFTOP_SOURCE) $(IFTOP_PATCHES) make/iftop.mk $(MAKE) libpcap-stage ncurses-stage rm -rf $(BUILD_DIR)/$(IFTOP_DIR) $(@D) $(IFTOP_UNZIP) $(DL_DIR)/$(IFTOP_SOURCE) | tar -C $(BUILD_DIR) -xvf - if test -n "$(IFTOP_PATCHES)" ; \ then cat $(IFTOP_PATCHES) | \ patch -d $(BUILD_DIR)/$(IFTOP_DIR) -p0 ; \ fi if test "$(BUILD_DIR)/$(IFTOP_DIR)" != "$(@D)" ; \ then mv $(BUILD_DIR)/$(IFTOP_DIR) $(@D) ; \ fi sed -i -e 's/curses ncurses/ncurses/' $(@D)/configure (cd $(@D); \ $(TARGET_CONFIGURE_OPTS) \ CPPFLAGS="$(STAGING_CPPFLAGS) $(IFTOP_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(IFTOP_LDFLAGS)" \ ./configure \ --build=$(GNU_HOST_NAME) \ --host=$(GNU_TARGET_NAME) \ --target=$(GNU_TARGET_NAME) \ --prefix=/opt \ --disable-nls \ --disable-static \ ) # $(PATCH_LIBTOOL) $(IFTOP_BUILD_DIR)/libtool touch $@ iftop-unpack: $(IFTOP_BUILD_DIR)/.configured # # This builds the actual binary. # $(IFTOP_BUILD_DIR)/.built: $(IFTOP_BUILD_DIR)/.configured rm -f $@ $(MAKE) -C $(@D) touch $@ # # This is the build convenience target. # iftop: $(IFTOP_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(IFTOP_BUILD_DIR)/.staged: $(IFTOP_BUILD_DIR)/.built rm -f $@ $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install touch $@ iftop-stage: $(IFTOP_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/iftop # $(IFTOP_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: iftop" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(IFTOP_PRIORITY)" >>$@ @echo "Section: $(IFTOP_SECTION)" >>$@ @echo "Version: $(IFTOP_VERSION)-$(IFTOP_IPK_VERSION)" >>$@ @echo "Maintainer: $(IFTOP_MAINTAINER)" >>$@ @echo "Source: $(IFTOP_SITE)/$(IFTOP_SOURCE)" >>$@ @echo "Description: $(IFTOP_DESCRIPTION)" >>$@ @echo "Depends: $(IFTOP_DEPENDS)" >>$@ @echo "Suggests: $(IFTOP_SUGGESTS)" >>$@ @echo "Conflicts: $(IFTOP_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(IFTOP_IPK_DIR)/opt/sbin or $(IFTOP_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(IFTOP_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(IFTOP_IPK_DIR)/opt/etc/iftop/... # Documentation files should be installed in $(IFTOP_IPK_DIR)/opt/doc/iftop/... # Daemon startup scripts should be installed in $(IFTOP_IPK_DIR)/opt/etc/init.d/S??iftop # # You may need to patch your application to make it use these locations. # $(IFTOP_IPK): $(IFTOP_BUILD_DIR)/.built rm -rf $(IFTOP_IPK_DIR) $(BUILD_DIR)/iftop_*_$(TARGET_ARCH).ipk $(MAKE) -C $(IFTOP_BUILD_DIR) DESTDIR=$(IFTOP_IPK_DIR) install-strip transform='' install -d $(IFTOP_IPK_DIR)/opt/etc/ # install -m 644 $(IFTOP_SOURCE_DIR)/iftop.conf $(IFTOP_IPK_DIR)/opt/etc/iftop.conf install -d $(IFTOP_IPK_DIR)/opt/man/man8 install -m 644 $(IFTOP_BUILD_DIR)/iftop.8 $(IFTOP_IPK_DIR)/opt/man/man8 # install -m 755 $(IFTOP_SOURCE_DIR)/rc.iftop $(IFTOP_IPK_DIR)/opt/etc/init.d/SXXiftop # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(IFTOP_IPK_DIR)/opt/etc/init.d/SXXiftop $(MAKE) $(IFTOP_IPK_DIR)/CONTROL/control # install -m 755 $(IFTOP_SOURCE_DIR)/postinst $(IFTOP_IPK_DIR)/CONTROL/postinst # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(IFTOP_IPK_DIR)/CONTROL/postinst # install -m 755 $(IFTOP_SOURCE_DIR)/prerm $(IFTOP_IPK_DIR)/CONTROL/prerm # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(IFTOP_IPK_DIR)/CONTROL/prerm # echo $(IFTOP_CONFFILES) | sed -e 's/ /\n/g' > $(IFTOP_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(IFTOP_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # iftop-ipk: $(IFTOP_IPK) # # This is called from the top level makefile to clean all of the built files. # iftop-clean: rm -f $(IFTOP_BUILD_DIR)/.built -$(MAKE) -C $(IFTOP_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # iftop-dirclean: rm -rf $(BUILD_DIR)/$(IFTOP_DIR) $(IFTOP_BUILD_DIR) $(IFTOP_IPK_DIR) $(IFTOP_IPK) # # # Some sanity check for the package. # iftop-check: $(IFTOP_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $^