########################################################### # # gnu-smalltalk # ########################################################### # # GNU_SMALLTALK_VERSION, GNU_SMALLTALK_SITE and GNU_SMALLTALK_SOURCE define # the upstream location of the source code for the package. # GNU_SMALLTALK_DIR is the directory which is created when the source # archive is unpacked. # GNU_SMALLTALK_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # GNU_SMALLTALK_SITE=ftp://ftp.gnu.org/gnu/smalltalk GNU_SMALLTALK_VERSION=3.0.3 GNU_SMALLTALK_SOURCE=smalltalk-$(GNU_SMALLTALK_VERSION).tar.gz GNU_SMALLTALK_DIR=smalltalk-$(GNU_SMALLTALK_VERSION) GNU_SMALLTALK_UNZIP=zcat GNU_SMALLTALK_MAINTAINER=NSLU2 Linux GNU_SMALLTALK_DESCRIPTION=GNU Smalltalk is a free implementation of the Smalltalk-80 language. GNU_SMALLTALK_SECTION=lang GNU_SMALLTALK_PRIORITY=optional GNU_SMALLTALK_DEPENDS=libgmp # , libsigsegv GNU_SMALLTALK_SUGGESTS=gdbm, zlib GNU_SMALLTALK_CONFLICTS= # # GNU_SMALLTALK_IPK_VERSION should be incremented when the ipk changes. # GNU_SMALLTALK_IPK_VERSION=2 # # GNU_SMALLTALK_CONFFILES should be a list of user-editable files #GNU_SMALLTALK_CONFFILES=/opt/etc/gnu-smalltalk.conf /opt/etc/init.d/SXXgnu-smalltalk # # GNU_SMALLTALK_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # GNU_SMALLTALK_PATCHES= ifneq ($(HOSTCC), $(TARGET_CC)) GNU_SMALLTALK_PATCHES+=$(GNU_SMALLTALK_SOURCE_DIR)/hostbuilddir.patch endif ifeq ($(OPTWARE_TARGET), $(filter oleg ddwrt openwrt-ixp4xx, $(OPTWARE_TARGET))) GNU_SMALLTALK_PATCHES+=$(GNU_SMALLTALK_SOURCE_DIR)/static-def.patch endif # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # GNU_SMALLTALK_CPPFLAGS= #ifeq ($(OPTWARE_TARGET), $(filter oleg ddwrt openwrt-ixp4xx, $(OPTWARE_TARGET))) #GNU_SMALLTALK_CPPFLAGS+=-D__error_t_defined=1 #endif #ifdef NO_BUILTIN_MATH #GNU_SMALLTALK_CPPFLAGS+=-fno-builtin-trunc -fno-builtin-lrint #endif GNU_SMALLTALK_LDFLAGS= # # GNU_SMALLTALK_BUILD_DIR is the directory in which the build is done. # GNU_SMALLTALK_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # GNU_SMALLTALK_IPK_DIR is the directory in which the ipk is built. # GNU_SMALLTALK_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # GNU_SMALLTALK_SOURCE_DIR=$(SOURCE_DIR)/gnu-smalltalk GNU_SMALLTALK_BUILD_DIR=$(BUILD_DIR)/gnu-smalltalk GNU_SMALLTALK_HOST_BUILD_DIR=$(HOST_BUILD_DIR)/gnu-smalltalk GNU_SMALLTALK_IPK_DIR=$(BUILD_DIR)/gnu-smalltalk-$(GNU_SMALLTALK_VERSION)-ipk GNU_SMALLTALK_IPK=$(BUILD_DIR)/gnu-smalltalk_$(GNU_SMALLTALK_VERSION)-$(GNU_SMALLTALK_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: gnu-smalltalk-source gnu-smalltalk-unpack gnu-smalltalk gnu-smalltalk-stage gnu-smalltalk-ipk gnu-smalltalk-clean gnu-smalltalk-dirclean gnu-smalltalk-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(GNU_SMALLTALK_SOURCE): $(WGET) -P $(@D) $(GNU_SMALLTALK_SITE)/$(@F) || \ $(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # gnu-smalltalk-source: $(DL_DIR)/$(GNU_SMALLTALK_SOURCE) $(GNU_SMALLTALK_PATCHES) $(GNU_SMALLTALK_HOST_BUILD_DIR)/.built: host/.configured $(DL_DIR)/$(GNU_SMALLTALK_SOURCE) #make/gnu-smalltalk.mk rm -f $@ rm -rf $(HOST_BUILD_DIR)/$(GNU_SMALLTALK_DIR) $(@D) $(GNU_SMALLTALK_UNZIP) $(DL_DIR)/$(GNU_SMALLTALK_SOURCE) | tar -C $(HOST_BUILD_DIR) -xvf - if test "$(HOST_BUILD_DIR)/$(GNU_SMALLTALK_DIR)" != "$(@D)" ; \ then mv $(HOST_BUILD_DIR)/$(GNU_SMALLTALK_DIR) $(@D) ; \ fi (cd $(@D); \ ./configure \ --prefix=/opt \ --disable-nls \ --disable-static \ ) $(MAKE) -C $(@D) touch $@ # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # ifeq ($(HOSTCC), $(TARGET_CC)) $(GNU_SMALLTALK_BUILD_DIR)/.configured: $(DL_DIR)/$(GNU_SMALLTALK_SOURCE) $(GNU_SMALLTALK_PATCHES) make/gnu-smalltalk.mk else $(GNU_SMALLTALK_BUILD_DIR)/.configured: $(GNU_SMALLTALK_HOST_BUILD_DIR)/.built $(GNU_SMALLTALK_PATCHES) endif $(MAKE) libgmp-stage # $(MAKE) libsigsegv-stage # $(MAKE) readline-stage $(MAKE) gdbm-stage $(MAKE) zlib-stage rm -rf $(BUILD_DIR)/$(GNU_SMALLTALK_DIR) $(@D) $(GNU_SMALLTALK_UNZIP) $(DL_DIR)/$(GNU_SMALLTALK_SOURCE) | tar -C $(BUILD_DIR) -xvf - if test -n "$(GNU_SMALLTALK_PATCHES)" ; \ then cat $(GNU_SMALLTALK_PATCHES) | \ patch -bd $(BUILD_DIR)/$(GNU_SMALLTALK_DIR) -p0 ; \ fi if test "$(BUILD_DIR)/$(GNU_SMALLTALK_DIR)" != "$(@D)" ; \ then mv $(BUILD_DIR)/$(GNU_SMALLTALK_DIR) $(@D) ; \ fi # gst_cv_readline_libs="-lreadline -ltermcap" (cd $(@D); \ $(TARGET_CONFIGURE_OPTS) \ CPPFLAGS="$(STAGING_CPPFLAGS) $(GNU_SMALLTALK_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(GNU_SMALLTALK_LDFLAGS)" \ ./configure \ --build=$(GNU_HOST_NAME) \ --host=$(GNU_TARGET_NAME) \ --target=$(GNU_TARGET_NAME) \ --prefix=/opt \ --disable-nls \ --disable-static \ --disable-gtk \ --without-emacs \ --without-readline \ --without-tcl \ --without-tk \ ) # sed -i -e 's/ sigsegv//' $(@D)/Makefile $(PATCH_LIBTOOL) $(@D)/libtool touch $@ gnu-smalltalk-unpack: $(GNU_SMALLTALK_BUILD_DIR)/.configured # # This builds the actual binary. # $(GNU_SMALLTALK_BUILD_DIR)/.built: $(GNU_SMALLTALK_BUILD_DIR)/.configured rm -f $@ $(MAKE) -C $(@D) GNU_SMALLTALK_HOST_BUILD_DIR=$(GNU_SMALLTALK_HOST_BUILD_DIR) touch $@ # # This is the build convenience target. # gnu-smalltalk: $(GNU_SMALLTALK_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # #$(GNU_SMALLTALK_BUILD_DIR)/.staged: $(GNU_SMALLTALK_BUILD_DIR)/.built # rm -f $@ # $(MAKE) -C $(GNU_SMALLTALK_BUILD_DIR) DESTDIR=$(STAGING_DIR) install # touch $@ # #gnu-smalltalk-stage: $(GNU_SMALLTALK_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/gnu-smalltalk # $(GNU_SMALLTALK_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: gnu-smalltalk" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(GNU_SMALLTALK_PRIORITY)" >>$@ @echo "Section: $(GNU_SMALLTALK_SECTION)" >>$@ @echo "Version: $(GNU_SMALLTALK_VERSION)-$(GNU_SMALLTALK_IPK_VERSION)" >>$@ @echo "Maintainer: $(GNU_SMALLTALK_MAINTAINER)" >>$@ @echo "Source: $(GNU_SMALLTALK_SITE)/$(GNU_SMALLTALK_SOURCE)" >>$@ @echo "Description: $(GNU_SMALLTALK_DESCRIPTION)" >>$@ @echo "Depends: $(GNU_SMALLTALK_DEPENDS)" >>$@ @echo "Suggests: $(GNU_SMALLTALK_SUGGESTS)" >>$@ @echo "Conflicts: $(GNU_SMALLTALK_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(GNU_SMALLTALK_IPK_DIR)/opt/sbin or $(GNU_SMALLTALK_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(GNU_SMALLTALK_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(GNU_SMALLTALK_IPK_DIR)/opt/etc/gnu-smalltalk/... # Documentation files should be installed in $(GNU_SMALLTALK_IPK_DIR)/opt/doc/gnu-smalltalk/... # Daemon startup scripts should be installed in $(GNU_SMALLTALK_IPK_DIR)/opt/etc/init.d/S??gnu-smalltalk # # You may need to patch your application to make it use these locations. # $(GNU_SMALLTALK_IPK): $(GNU_SMALLTALK_BUILD_DIR)/.built rm -rf $(GNU_SMALLTALK_IPK_DIR) $(BUILD_DIR)/gnu-smalltalk_*_$(TARGET_ARCH).ipk $(MAKE) -C $(GNU_SMALLTALK_BUILD_DIR) install-strip \ DESTDIR=$(GNU_SMALLTALK_IPK_DIR) \ GNU_SMALLTALK_HOST_BUILD_DIR=$(GNU_SMALLTALK_HOST_BUILD_DIR) $(STRIP_COMMAND) $(GNU_SMALLTALK_IPK_DIR)/opt/bin/gst-load rm -f $(GNU_SMALLTALK_IPK_DIR)/opt/lib/smalltalk/*.la # rm -f $(GNU_SMALLTALK_IPK_DIR)/opt/lib/libsigsegv* # rm -f $(GNU_SMALLTALK_IPK_DIR)/opt/include/sigsegv* $(MAKE) $(GNU_SMALLTALK_IPK_DIR)/CONTROL/control install -m 755 $(GNU_SMALLTALK_SOURCE_DIR)/postinst $(GNU_SMALLTALK_IPK_DIR)/CONTROL/postinst # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(GNU_SMALLTALK_IPK_DIR)/CONTROL/postinst # install -m 755 $(GNU_SMALLTALK_SOURCE_DIR)/prerm $(GNU_SMALLTALK_IPK_DIR)/CONTROL/prerm # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(GNU_SMALLTALK_IPK_DIR)/CONTROL/prerm echo $(GNU_SMALLTALK_CONFFILES) | sed -e 's/ /\n/g' > $(GNU_SMALLTALK_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(GNU_SMALLTALK_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # gnu-smalltalk-ipk: $(GNU_SMALLTALK_IPK) # # This is called from the top level makefile to clean all of the built files. # gnu-smalltalk-clean: rm -f $(GNU_SMALLTALK_BUILD_DIR)/.built -$(MAKE) -C $(GNU_SMALLTALK_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # gnu-smalltalk-dirclean: rm -rf $(BUILD_DIR)/$(GNU_SMALLTALK_DIR) $(GNU_SMALLTALK_BUILD_DIR) $(GNU_SMALLTALK_IPK_DIR) $(GNU_SMALLTALK_IPK) # # # Some sanity check for the package. # gnu-smalltalk-check: $(GNU_SMALLTALK_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $^