########################################################### # # dbus-glib # ########################################################### # # DBUS-GLIB_VERSION, DBUS-GLIB_SITE and DBUS-GLIB_SOURCE define # the upstream location of the source code for the package. # DBUS-GLIB_DIR is the directory which is created when the source # archive is unpacked. # DBUS-GLIB_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # DBUS-GLIB_SITE=http://dbus.freedesktop.org/releases/dbus-glib DBUS-GLIB_VERSION=0.82 DBUS-GLIB_SOURCE=dbus-glib-$(DBUS-GLIB_VERSION).tar.gz DBUS-GLIB_DIR=dbus-glib-$(DBUS-GLIB_VERSION) DBUS-GLIB_UNZIP=zcat DBUS-GLIB_MAINTAINER=NSLU2 Linux DBUS-GLIB_DESCRIPTION=D-Bus Glib bindings DBUS-GLIB_SECTION=devel DBUS-GLIB_PRIORITY=optional DBUS-GLIB_DEPENDS=dbus, glib DBUS-GLIB_SUGGESTS= DBUS-GLIB_CONFLICTS= # # DBUS-GLIB_IPK_VERSION should be incremented when the ipk changes. # DBUS-GLIB_IPK_VERSION=1 # # DBUS-GLIB_CONFFILES should be a list of user-editable files #DBUS-GLIB_CONFFILES= # # DBUS-GLIB_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # #DBUS-GLIB_PATCHES=$(DBUS-GLIB_SOURCE_DIR)/configure.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # DBUS-GLIB_CPPFLAGS= DBUS-GLIB_LDFLAGS= ifneq ($(HOSTCC), $(TARGET_CC)) DBUS-GLIB_CROSS_CONFIG_ENVS=ac_cv_func_posix_getpwnam_r=yes ac_cv_have_abstract_sockets=yes endif # # DBUS-GLIB_BUILD_DIR is the directory in which the build is done. # DBUS-GLIB_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # DBUS-GLIB_IPK_DIR is the directory in which the ipk is built. # DBUS-GLIB_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # DBUS-GLIB_BUILD_DIR=$(BUILD_DIR)/dbus-glib DBUS-GLIB_SOURCE_DIR=$(SOURCE_DIR)/dbus-glib DBUS-GLIB_IPK_DIR=$(BUILD_DIR)/dbus-glib-$(DBUS-GLIB_VERSION)-ipk DBUS-GLIB_IPK=$(BUILD_DIR)/dbus-glib_$(DBUS-GLIB_VERSION)-$(DBUS-GLIB_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: dbus-glib-source dbus-glib-unpack dbus-glib dbus-glib-stage dbus-glib-ipk dbus-glib-clean dbus-glib-dirclean dbus-glib-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(DBUS-GLIB_SOURCE): $(WGET) -P $(@D) $(DBUS-GLIB_SITE)/$(@F) || \ $(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # dbus-glib-source: $(DL_DIR)/$(DBUS-GLIB_SOURCE) $(DBUS-GLIB_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # $(DBUS-GLIB_BUILD_DIR)/.configured: $(DL_DIR)/$(DBUS-GLIB_SOURCE) $(DBUS-GLIB_PATCHES) make/dbus-glib.mk $(MAKE) dbus-stage glib-stage rm -rf $(BUILD_DIR)/$(DBUS-GLIB_DIR) $(@D) $(DBUS-GLIB_UNZIP) $(DL_DIR)/$(DBUS-GLIB_SOURCE) | tar -C $(BUILD_DIR) -xvf - if test -n "$(DBUS-GLIB_PATCHES)" ; \ then cat $(DBUS-GLIB_PATCHES) | \ patch -d $(BUILD_DIR)/$(DBUS-GLIB_DIR) -p0 ; \ fi if test "$(BUILD_DIR)/$(DBUS-GLIB_DIR)" != "$(@D)" ; \ then mv $(BUILD_DIR)/$(DBUS-GLIB_DIR) $(@D) ; \ fi sed -i -e '/^SUBDIRS/s/=.*/= dbus/' $(@D)/Makefile.in sed -i -e '/^SUBDIRS/s/=.*/= ./' $(@D)/dbus/Makefile.in (cd $(@D); \ $(TARGET_CONFIGURE_OPTS) \ CPPFLAGS="$(STAGING_CPPFLAGS) $(DBUS-GLIB_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(DBUS-GLIB_LDFLAGS)" \ PKG_CONFIG_PATH=$(STAGING_LIB_DIR)/pkgconfig \ $(DBUS-GLIB_CROSS_CONFIG_ENVS) \ ./configure \ --build=$(GNU_HOST_NAME) \ --host=$(GNU_TARGET_NAME) \ --target=$(GNU_TARGET_NAME) \ --prefix=/opt \ --enable-abstract-sockets \ --with-xml=expat \ --without-x \ --disable-nls \ --disable-static \ ) $(PATCH_LIBTOOL) $(@D)/libtool touch $@ dbus-glib-unpack: $(DBUS-GLIB_BUILD_DIR)/.configured # # This builds the actual binary. # $(DBUS-GLIB_BUILD_DIR)/.built: $(DBUS-GLIB_BUILD_DIR)/.configured rm -f $@ $(MAKE) -C $(@D) touch $@ # # This is the build convenience target. # dbus-glib: $(DBUS-GLIB_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(DBUS-GLIB_BUILD_DIR)/.staged: $(DBUS-GLIB_BUILD_DIR)/.built rm -f $@ $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) transform='' install sed -i -e 's|^prefix=.*|prefix=$(STAGING_PREFIX)|' $(STAGING_LIB_DIR)/pkgconfig/dbus-glib-*.pc rm -f $(STAGING_LIB_DIR)/libdbus-glib*.la touch $@ dbus-glib-stage: $(DBUS-GLIB_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/dbus-glib # $(DBUS-GLIB_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: dbus-glib" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(DBUS-GLIB_PRIORITY)" >>$@ @echo "Section: $(DBUS-GLIB_SECTION)" >>$@ @echo "Version: $(DBUS-GLIB_VERSION)-$(DBUS-GLIB_IPK_VERSION)" >>$@ @echo "Maintainer: $(DBUS-GLIB_MAINTAINER)" >>$@ @echo "Source: $(DBUS-GLIB_SITE)/$(DBUS-GLIB_SOURCE)" >>$@ @echo "Description: $(DBUS-GLIB_DESCRIPTION)" >>$@ @echo "Depends: $(DBUS-GLIB_DEPENDS)" >>$@ @echo "Suggests: $(DBUS-GLIB_SUGGESTS)" >>$@ @echo "Conflicts: $(DBUS-GLIB_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(DBUS-GLIB_IPK_DIR)/opt/sbin or $(DBUS-GLIB_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(DBUS-GLIB_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(DBUS-GLIB_IPK_DIR)/opt/etc/dbus-glib/... # Documentation files should be installed in $(DBUS-GLIB_IPK_DIR)/opt/doc/dbus-glib/... # Daemon startup scripts should be installed in $(DBUS-GLIB_IPK_DIR)/opt/etc/init.d/S??dbus-glib # # You may need to patch your application to make it use these locations. # $(DBUS-GLIB_IPK): $(DBUS-GLIB_BUILD_DIR)/.built rm -rf $(DBUS-GLIB_IPK_DIR) $(BUILD_DIR)/dbus-glib_*_$(TARGET_ARCH).ipk $(MAKE) -C $(DBUS-GLIB_BUILD_DIR) DESTDIR=$(DBUS-GLIB_IPK_DIR) transform='' install-strip # install -d $(DBUS-GLIB_IPK_DIR)/opt/etc/ # install -m 644 $(DBUS-GLIB_SOURCE_DIR)/dbus-glib.conf $(DBUS-GLIB_IPK_DIR)/opt/etc/dbus-glib.conf # install -d $(DBUS-GLIB_IPK_DIR)/opt/etc/default # install -m 644 $(DBUS-GLIB_SOURCE_DIR)/dbus-glib.default $(DBUS-GLIB_IPK_DIR)/opt/etc/default/dbus-glib # install -d $(DBUS-GLIB_IPK_DIR)/opt/etc/init.d # install -m 755 $(DBUS-GLIB_SOURCE_DIR)/dbus-glib.init $(DBUS-GLIB_IPK_DIR)/opt/etc/init.d/S20dbus-glib # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(DBUS-GLIB_IPK_DIR)/opt/etc/init.d/S20dbus-glib $(MAKE) $(DBUS-GLIB_IPK_DIR)/CONTROL/control # install -m 755 $(DBUS-GLIB_SOURCE_DIR)/postinst $(DBUS-GLIB_IPK_DIR)/CONTROL/postinst # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(DBUS-GLIB_IPK_DIR)/CONTROL/postinst # install -m 755 $(DBUS-GLIB_SOURCE_DIR)/prerm $(DBUS-GLIB_IPK_DIR)/CONTROL/prerm # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(DBUS-GLIB_IPK_DIR)/CONTROL/prerm echo $(DBUS-GLIB_CONFFILES) | sed -e 's/ /\n/g' > $(DBUS-GLIB_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(DBUS-GLIB_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # dbus-glib-ipk: $(DBUS-GLIB_IPK) # # This is called from the top level makefile to clean all of the built files. # dbus-glib-clean: rm -f $(DBUS-GLIB_BUILD_DIR)/.built -$(MAKE) -C $(DBUS-GLIB_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # dbus-glib-dirclean: rm -rf $(BUILD_DIR)/$(DBUS-GLIB_DIR) $(DBUS-GLIB_BUILD_DIR) $(DBUS-GLIB_IPK_DIR) $(DBUS-GLIB_IPK) # # # Some sanity check for the package. # dbus-glib-check: $(DBUS-GLIB_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $^