########################################################### # # davtools # ########################################################### # # DAVTOOLS_VERSION, DAVTOOLS_SITE and DAVTOOLS_SOURCE define # the upstream location of the source code for the package. # DAVTOOLS_DIR is the directory which is created when the source # archive is unpacked. # DAVTOOLS_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # DAVTOOLS_SITE=http://$(SOURCEFORGE_MIRROR)/sourceforge/davtools DAVTOOLS_VERSION=1.2.0 DAVTOOLS_SOURCE=davl-$(DAVTOOLS_VERSION).tar.bz2 DAVTOOLS_DIR=davl-$(DAVTOOLS_VERSION) DAVTOOLS_UNZIP=bzcat DAVTOOLS_MAINTAINER=NSLU2 Linux DAVTOOLS_DESCRIPTION=Disk Allocation Viewer - obtain the state of fragmentation on disk. DAVTOOLS_SECTION=admin DAVTOOLS_PRIORITY=optional DAVTOOLS_DEPENDS=e2fsprogs DAVTOOLS_SUGGESTS= DAVTOOLS_CONFLICTS= # # DAVTOOLS_IPK_VERSION should be incremented when the ipk changes. # DAVTOOLS_IPK_VERSION=1 # # DAVTOOLS_CONFFILES should be a list of user-editable files #DAVTOOLS_CONFFILES=/opt/etc/davtools.conf /opt/etc/init.d/SXXdavtools # # DAVTOOLS_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # #DAVTOOLS_PATCHES=$(DAVTOOLS_SOURCE_DIR)/configure.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # DAVTOOLS_CPPFLAGS= DAVTOOLS_LDFLAGS= # # DAVTOOLS_BUILD_DIR is the directory in which the build is done. # DAVTOOLS_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # DAVTOOLS_IPK_DIR is the directory in which the ipk is built. # DAVTOOLS_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # DAVTOOLS_BUILD_DIR=$(BUILD_DIR)/davtools DAVTOOLS_SOURCE_DIR=$(SOURCE_DIR)/davtools DAVTOOLS_IPK_DIR=$(BUILD_DIR)/davtools-$(DAVTOOLS_VERSION)-ipk DAVTOOLS_IPK=$(BUILD_DIR)/davtools_$(DAVTOOLS_VERSION)-$(DAVTOOLS_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: davtools-source davtools-unpack davtools davtools-stage davtools-ipk davtools-clean davtools-dirclean davtools-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(DAVTOOLS_SOURCE): $(WGET) -P $(DL_DIR) $(DAVTOOLS_SITE)/$(DAVTOOLS_SOURCE) || \ $(WGET) -P $(DL_DIR) $(SOURCES_NLO_SITE)/$(DAVTOOLS_SOURCE) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # davtools-source: $(DL_DIR)/$(DAVTOOLS_SOURCE) $(DAVTOOLS_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # $(DAVTOOLS_BUILD_DIR)/.configured: $(DL_DIR)/$(DAVTOOLS_SOURCE) $(DAVTOOLS_PATCHES) make/davtools.mk $(MAKE) e2fsprogs-stage rm -rf $(BUILD_DIR)/$(DAVTOOLS_DIR) $(DAVTOOLS_BUILD_DIR) $(DAVTOOLS_UNZIP) $(DL_DIR)/$(DAVTOOLS_SOURCE) | tar -C $(BUILD_DIR) -xvf - if test -n "$(DAVTOOLS_PATCHES)" ; \ then cat $(DAVTOOLS_PATCHES) | \ patch -d $(BUILD_DIR)/$(DAVTOOLS_DIR) -p0 ; \ fi if test "$(BUILD_DIR)/$(DAVTOOLS_DIR)" != "$(DAVTOOLS_BUILD_DIR)" ; \ then mv $(BUILD_DIR)/$(DAVTOOLS_DIR) $(DAVTOOLS_BUILD_DIR) ; \ fi sed -i -e '/^CC/d' -e 's/^CFLAGS =/CFLAGS +=/' \ $(DAVTOOLS_BUILD_DIR)/src/*/Makefile touch $@ davtools-unpack: $(DAVTOOLS_BUILD_DIR)/.configured # # This builds the actual binary. # $(DAVTOOLS_BUILD_DIR)/.built: $(DAVTOOLS_BUILD_DIR)/.configured rm -f $@ $(TARGET_CONFIGURE_OPTS) \ CFLAGS="$(STAGING_CPPFLAGS) $(DAVTOOLS_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(DAVTOOLS_LDFLAGS)" \ $(MAKE) -C $(DAVTOOLS_BUILD_DIR)/src/common $(TARGET_CONFIGURE_OPTS) \ CFLAGS="$(STAGING_CPPFLAGS) $(DAVTOOLS_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(DAVTOOLS_LDFLAGS)" \ $(MAKE) -C $(DAVTOOLS_BUILD_DIR)/src/cdavl touch $@ # # This is the build convenience target. # davtools: $(DAVTOOLS_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(DAVTOOLS_BUILD_DIR)/.staged: $(DAVTOOLS_BUILD_DIR)/.built rm -f $@ $(MAKE) -C $(DAVTOOLS_BUILD_DIR) DESTDIR=$(STAGING_DIR) install touch $@ davtools-stage: $(DAVTOOLS_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/davtools # $(DAVTOOLS_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: davtools" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(DAVTOOLS_PRIORITY)" >>$@ @echo "Section: $(DAVTOOLS_SECTION)" >>$@ @echo "Version: $(DAVTOOLS_VERSION)-$(DAVTOOLS_IPK_VERSION)" >>$@ @echo "Maintainer: $(DAVTOOLS_MAINTAINER)" >>$@ @echo "Source: $(DAVTOOLS_SITE)/$(DAVTOOLS_SOURCE)" >>$@ @echo "Description: $(DAVTOOLS_DESCRIPTION)" >>$@ @echo "Depends: $(DAVTOOLS_DEPENDS)" >>$@ @echo "Suggests: $(DAVTOOLS_SUGGESTS)" >>$@ @echo "Conflicts: $(DAVTOOLS_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(DAVTOOLS_IPK_DIR)/opt/sbin or $(DAVTOOLS_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(DAVTOOLS_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(DAVTOOLS_IPK_DIR)/opt/etc/davtools/... # Documentation files should be installed in $(DAVTOOLS_IPK_DIR)/opt/doc/davtools/... # Daemon startup scripts should be installed in $(DAVTOOLS_IPK_DIR)/opt/etc/init.d/S??davtools # # You may need to patch your application to make it use these locations. # $(DAVTOOLS_IPK): $(DAVTOOLS_BUILD_DIR)/.built rm -rf $(DAVTOOLS_IPK_DIR) $(BUILD_DIR)/davtools_*_$(TARGET_ARCH).ipk # $(MAKE) -C $(DAVTOOLS_BUILD_DIR) DESTDIR=$(DAVTOOLS_IPK_DIR) install-strip install -d $(DAVTOOLS_IPK_DIR)/opt/bin install -m 755 $(DAVTOOLS_BUILD_DIR)/src/cdavl/cdavl $(DAVTOOLS_IPK_DIR)/opt/bin $(STRIP_COMMAND) $(DAVTOOLS_IPK_DIR)/opt/bin/cdavl install -d $(DAVTOOLS_IPK_DIR)/opt/man/man8 install -m 644 $(DAVTOOLS_BUILD_DIR)/doc/cdavl.8 $(DAVTOOLS_IPK_DIR)/opt/man/man8/ # install -m 755 $(DAVTOOLS_SOURCE_DIR)/rc.davtools $(DAVTOOLS_IPK_DIR)/opt/etc/init.d/SXXdavtools # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(DAVTOOLS_IPK_DIR)/opt/etc/init.d/SXXdavtools $(MAKE) $(DAVTOOLS_IPK_DIR)/CONTROL/control # install -m 755 $(DAVTOOLS_SOURCE_DIR)/postinst $(DAVTOOLS_IPK_DIR)/CONTROL/postinst # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(DAVTOOLS_IPK_DIR)/CONTROL/postinst # install -m 755 $(DAVTOOLS_SOURCE_DIR)/prerm $(DAVTOOLS_IPK_DIR)/CONTROL/prerm # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(DAVTOOLS_IPK_DIR)/CONTROL/prerm # echo $(DAVTOOLS_CONFFILES) | sed -e 's/ /\n/g' > $(DAVTOOLS_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(DAVTOOLS_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # davtools-ipk: $(DAVTOOLS_IPK) # # This is called from the top level makefile to clean all of the built files. # davtools-clean: rm -f $(DAVTOOLS_BUILD_DIR)/.built -$(MAKE) -C $(DAVTOOLS_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # davtools-dirclean: rm -rf $(BUILD_DIR)/$(DAVTOOLS_DIR) $(DAVTOOLS_BUILD_DIR) $(DAVTOOLS_IPK_DIR) $(DAVTOOLS_IPK) # # # Some sanity check for the package. # davtools-check: $(DAVTOOLS_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $(DAVTOOLS_IPK)