########################################################### # # cscope # ########################################################### # # CSCOPE_VERSION, CSCOPE_SITE and CSCOPE_SOURCE define # the upstream location of the source code for the package. # CSCOPE_DIR is the directory which is created when the source # archive is unpacked. # CSCOPE_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # CSCOPE_SITE=http://$(SOURCEFORGE_MIRROR)/sourceforge/cscope CSCOPE_VERSION=15.7a CSCOPE_SOURCE=cscope-$(CSCOPE_VERSION).tar.bz2 CSCOPE_DIR=cscope-$(CSCOPE_VERSION) CSCOPE_UNZIP=bzcat CSCOPE_MAINTAINER=NSLU2 Linux CSCOPE_DESCRIPTION=A tool for developer to browse source code. CSCOPE_SECTION=misc CSCOPE_PRIORITY=optional CSCOPE_DEPENDS=ncurses CSCOPE_SUGGESTS= CSCOPE_CONFLICTS= # # CSCOPE_IPK_VERSION should be incremented when the ipk changes. # CSCOPE_IPK_VERSION=2 # # CSCOPE_CONFFILES should be a list of user-editable files # CSCOPE_CONFFILES=/opt/etc/cscope.conf /opt/etc/init.d/SXXcscope # # CSCOPE_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # # CSCOPE_PATCHES=$(CSCOPE_SOURCE_DIR)/configure.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # CSCOPE_CPPFLAGS=-I$(STAGING_INCLUDE_DIR)/ncurses CSCOPE_LDFLAGS= # # CSCOPE_BUILD_DIR is the directory in which the build is done. # CSCOPE_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # CSCOPE_IPK_DIR is the directory in which the ipk is built. # CSCOPE_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # CSCOPE_BUILD_DIR=$(BUILD_DIR)/cscope CSCOPE_SOURCE_DIR=$(SOURCE_DIR)/cscope CSCOPE_IPK_DIR=$(BUILD_DIR)/cscope-$(CSCOPE_VERSION)-ipk CSCOPE_IPK=$(BUILD_DIR)/cscope_$(CSCOPE_VERSION)-$(CSCOPE_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: cscope-source cscope-unpack cscope cscope-stage cscope-ipk cscope-clean cscope-dirclean cscope-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(CSCOPE_SOURCE): $(WGET) -P $(@D) $(CSCOPE_SITE)/$(@F) || \ $(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # cscope-source: $(DL_DIR)/$(CSCOPE_SOURCE) $(CSCOPE_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # $(CSCOPE_BUILD_DIR)/.configured: $(DL_DIR)/$(CSCOPE_SOURCE) $(CSCOPE_PATCHES) make/cscope.mk $(MAKE) ncurses-stage rm -rf $(BUILD_DIR)/$(CSCOPE_DIR) $(@D) $(CSCOPE_UNZIP) $(DL_DIR)/$(CSCOPE_SOURCE) | tar -C $(BUILD_DIR) -xvf - if test -n "$(CSCOPE_PATCHES)" ; \ then cat $(CSCOPE_PATCHES) | \ patch -d $(BUILD_DIR)/$(CSCOPE_DIR) -p0 ; \ fi if test "$(BUILD_DIR)/$(CSCOPE_DIR)" != "$(@D)" ; \ then mv $(BUILD_DIR)/$(CSCOPE_DIR) $(@D) ; \ fi (cd $(@D); \ $(TARGET_CONFIGURE_OPTS) \ CPPFLAGS="$(STAGING_CPPFLAGS) $(CSCOPE_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(CSCOPE_LDFLAGS)" \ hw_cv_func_snprintf_c99=yes \ ./configure \ --build=$(GNU_HOST_NAME) \ --host=$(GNU_TARGET_NAME) \ --target=$(GNU_TARGET_NAME) \ --prefix=/opt \ --disable-nls \ --disable-static \ ) # $(PATCH_LIBTOOL) $(@D)/libtool touch $@ cscope-unpack: $(CSCOPE_BUILD_DIR)/.configured # # This builds the actual binary. # $(CSCOPE_BUILD_DIR)/.built: $(CSCOPE_BUILD_DIR)/.configured rm -f $@ $(MAKE) -C $(@D) touch $@ # # This is the build convenience target. # cscope: $(CSCOPE_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(CSCOPE_BUILD_DIR)/.staged: $(CSCOPE_BUILD_DIR)/.built rm -f $@ $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install touch $@ cscope-stage: $(CSCOPE_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/cscope # $(CSCOPE_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: cscope" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(CSCOPE_PRIORITY)" >>$@ @echo "Section: $(CSCOPE_SECTION)" >>$@ @echo "Version: $(CSCOPE_VERSION)-$(CSCOPE_IPK_VERSION)" >>$@ @echo "Maintainer: $(CSCOPE_MAINTAINER)" >>$@ @echo "Source: $(CSCOPE_SITE)/$(CSCOPE_SOURCE)" >>$@ @echo "Description: $(CSCOPE_DESCRIPTION)" >>$@ @echo "Depends: $(CSCOPE_DEPENDS)" >>$@ @echo "Suggests: $(CSCOPE_SUGGESTS)" >>$@ @echo "Conflicts: $(CSCOPE_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(CSCOPE_IPK_DIR)/opt/sbin or $(CSCOPE_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(CSCOPE_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(CSCOPE_IPK_DIR)/opt/etc/cscope/... # Documentation files should be installed in $(CSCOPE_IPK_DIR)/opt/doc/cscope/... # Daemon startup scripts should be installed in $(CSCOPE_IPK_DIR)/opt/etc/init.d/S??cscope # # You may need to patch your application to make it use these locations. # $(CSCOPE_IPK): $(CSCOPE_BUILD_DIR)/.built rm -rf $(CSCOPE_IPK_DIR) $(BUILD_DIR)/cscope_*_$(TARGET_ARCH).ipk $(MAKE) -C $(CSCOPE_BUILD_DIR) DESTDIR=$(CSCOPE_IPK_DIR) install-strip # install -d $(CSCOPE_IPK_DIR)/opt/etc/ # install -m 644 $(CSCOPE_SOURCE_DIR)/cscope.conf $(CSCOPE_IPK_DIR)/opt/etc/cscope.conf # install -d $(CSCOPE_IPK_DIR)/opt/etc/init.d # install -m 755 $(CSCOPE_SOURCE_DIR)/rc.cscope $(CSCOPE_IPK_DIR)/opt/etc/init.d/SXXcscope # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(XINETD_IPK_DIR)/opt/etc/init.d/SXXcscope $(MAKE) $(CSCOPE_IPK_DIR)/CONTROL/control # install -m 755 $(CSCOPE_SOURCE_DIR)/postinst $(CSCOPE_IPK_DIR)/CONTROL/postinst # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(XINETD_IPK_DIR)/CONTROL/postinst # install -m 755 $(CSCOPE_SOURCE_DIR)/prerm $(CSCOPE_IPK_DIR)/CONTROL/prerm # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(XINETD_IPK_DIR)/CONTROL/prerm echo $(CSCOPE_CONFFILES) | sed -e 's/ /\n/g' > $(CSCOPE_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(CSCOPE_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # cscope-ipk: $(CSCOPE_IPK) # # This is called from the top level makefile to clean all of the built files. # cscope-clean: rm -f $(CSCOPE_BUILD_DIR)/.built -$(MAKE) -C $(CSCOPE_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # cscope-dirclean: rm -rf $(BUILD_DIR)/$(CSCOPE_DIR) $(CSCOPE_BUILD_DIR) $(CSCOPE_IPK_DIR) $(CSCOPE_IPK) # # # Some sanity check for the package. # cscope-check: $(CSCOPE_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $^