###########################################################
#
# cherokee
#
###########################################################

#
# CHEROKEE_VERSION, CHEROKEE_SITE and CHEROKEE_SOURCE define
# the upstream location of the source code for the package.
# CHEROKEE_DIR is the directory which is created when the source
# archive is unpacked.
# CHEROKEE_UNZIP is the command used to unzip the source.
# It is usually "zcat" (for .gz) or "bzcat" (for .bz2)
#
# You should change all these variables to suit your package.
# Please make sure that you add a description, and that you
# list all your packages' dependencies, seperated by commas.
# 
# If you list yourself as MAINTAINER, please give a valid email
# address, and indicate your irc nick if it cannot be easily deduced
# from your name or email address.  If you leave MAINTAINER set to
# "NSLU2 Linux" other developers will feel free to edit.
#
CHEROKEE_VERSION=1.0.19
CHEROKEE_SITE=http://www.cherokee-project.com/download/1.0/$(CHEROKEE_VERSION)
CHEROKEE_SOURCE=cherokee-$(CHEROKEE_VERSION).tar.gz
CHEROKEE_DIR=cherokee-$(CHEROKEE_VERSION)
CHEROKEE_UNZIP=zcat
CHEROKEE_MAINTAINER=NSLU2 Linux <nslu2-linux@yahoogroups.com>
CHEROKEE_DESCRIPTION=A flexible, very fast, lightweight web server.
CHEROKEE_SECTION=web
CHEROKEE_PRIORITY=optional
CHEROKEE_DEPENDS=openssl, pcre
ifeq (openldap, $(filter openldap, $(PACKAGES)))
CHEROKEE_SUGGESTS=openldap-libs
endif
CHEROKEE_CONFLICTS=

#
# CHEROKEE_IPK_VERSION should be incremented when the ipk changes.
#
CHEROKEE_IPK_VERSION=2

#
# CHEROKEE_CONFFILES should be a list of user-editable files
CHEROKEE_CONFFILES=\
	/opt/etc/default/cherokee \
	/opt/etc/cherokee/cherokee.conf \
	/opt/etc/init.d/S80cherokee \
	/opt/share/www/cherokee/index.html \

#
# CHEROKEE_PATCHES should list any patches, in the the order in
# which they should be applied to the source code.
#
CHEROKEE_PATCHES=\
$(CHEROKEE_SOURCE_DIR)/conf.py.patch \
$(CHEROKEE_SOURCE_DIR)/array_param.patch \

#
# If the compilation of the package requires additional
# compilation or linking flags, then list them here.
#
CHEROKEE_CPPFLAGS=
CHEROKEE_LDFLAGS=

ifeq ($(OPTWARE_TARGET), $(filter nslu2, $(OPTWARE_TARGET)))
CHEROKEE_CONFIGURE_ENVS=ac_cv_func_shm_open=no ac_cv_lib_rt_shm_open=no
endif

ifeq (no, $(IPV6))
CHEROKEE_CONFIGURE_OPTIONS+=--disable-ipv6
endif

#
# CHEROKEE_BUILD_DIR is the directory in which the build is done.
# CHEROKEE_SOURCE_DIR is the directory which holds all the
# patches and ipkg control files.
# CHEROKEE_IPK_DIR is the directory in which the ipk is built.
# CHEROKEE_IPK is the name of the resulting ipk files.
#
# You should not change any of these variables.
#
CHEROKEE_BUILD_DIR=$(BUILD_DIR)/cherokee
CHEROKEE_SOURCE_DIR=$(SOURCE_DIR)/cherokee

CHEROKEE_IPK_DIR=$(BUILD_DIR)/cherokee-$(CHEROKEE_VERSION)-ipk
CHEROKEE_IPK=$(BUILD_DIR)/cherokee_$(CHEROKEE_VERSION)-$(CHEROKEE_IPK_VERSION)_$(TARGET_ARCH).ipk

CHEROKEE-ADMIN_IPK_DIR=$(BUILD_DIR)/cherokee-admin-$(CHEROKEE_VERSION)-ipk
CHEROKEE-ADMIN_IPK=$(BUILD_DIR)/cherokee-admin_$(CHEROKEE_VERSION)-$(CHEROKEE_IPK_VERSION)_$(TARGET_ARCH).ipk

CHEROKEE-DEV_IPK_DIR=$(BUILD_DIR)/cherokee-dev-$(CHEROKEE_VERSION)-ipk
CHEROKEE-DEV_IPK=$(BUILD_DIR)/cherokee-dev_$(CHEROKEE_VERSION)-$(CHEROKEE_IPK_VERSION)_$(TARGET_ARCH).ipk

CHEROKEE-DOC_IPK_DIR=$(BUILD_DIR)/cherokee-doc-$(CHEROKEE_VERSION)-ipk
CHEROKEE-DOC_IPK=$(BUILD_DIR)/cherokee-doc_$(CHEROKEE_VERSION)-$(CHEROKEE_IPK_VERSION)_$(TARGET_ARCH).ipk

.PHONY: cherokee-source cherokee-unpack cherokee cherokee-stage cherokee-ipk cherokee-clean cherokee-dirclean cherokee-check

#
# This is the dependency on the source code.  If the source is missing,
# then it will be fetched from the site using wget.
#
$(DL_DIR)/$(CHEROKEE_SOURCE):
	$(WGET) -P $(@D) $(CHEROKEE_SITE)/$(@F) || \
	$(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F)

#
# The source code depends on it existing within the download directory.
# This target will be called by the top level Makefile to download the
# source code's archive (.tar.gz, .bz2, etc.)
#
cherokee-source: $(DL_DIR)/$(CHEROKEE_SOURCE) $(CHEROKEE_PATCHES)

#
# This target unpacks the source code in the build directory.
# If the source archive is not .tar.gz or .tar.bz2, then you will need
# to change the commands here.  Patches to the source code are also
# applied in this target as required.
#
# This target also configures the build within the build directory.
# Flags such as LDFLAGS and CPPFLAGS should be passed into configure
# and NOT $(MAKE) below.  Passing it to configure causes configure to
# correctly BUILD the Makefile with the right paths, where passing it
# to Make causes it to override the default search paths of the compiler.
#
# If the compilation of the package requires other packages to be staged
# first, then do that first (e.g. "$(MAKE) <bar>-stage <baz>-stage").
#
# If the package uses  GNU libtool, you should invoke $(PATCH_LIBTOOL) as
# shown below to make various patches to it.
#
$(CHEROKEE_BUILD_DIR)/.configured: $(DL_DIR)/$(CHEROKEE_SOURCE) $(CHEROKEE_PATCHES) make/cherokee.mk
	$(MAKE) openssl-stage pcre-stage
ifeq (openldap, $(filter openldap, $(PACKAGES)))
	$(MAKE) openldap-stage
endif
	rm -rf $(BUILD_DIR)/$(CHEROKEE_DIR) $(CHEROKEE_BUILD_DIR)
	$(CHEROKEE_UNZIP) $(DL_DIR)/$(CHEROKEE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
	if test -n "$(CHEROKEE_PATCHES)"; then \
	    cat $(CHEROKEE_PATCHES) | patch -d $(BUILD_DIR)/$(CHEROKEE_DIR) -p1; \
	fi
	mv $(BUILD_DIR)/$(CHEROKEE_DIR) $(@D)
	sed -i.orig -e '1s|#!.*|#!/opt/bin/python|' $(@D)/admin/server.py
	sed -i.orig -e '/\/var\/run\/cherokee.pid/d' $(@D)/admin/PageNewConfig.py
	(cd $(@D); \
		$(TARGET_CONFIGURE_OPTS) \
		CPPFLAGS="$(STAGING_CPPFLAGS) $(CHEROKEE_CPPFLAGS)" \
		LDFLAGS="$(STAGING_LDFLAGS) $(CHEROKEE_LDFLAGS)" \
		ac_cv_what_readdir_r=POSIX \
		ac_cv_func_malloc_0_nonnull=yes \
		ac_cv_func_realloc_0_nonnull=yes \
		$(CHEROKEE_CONFIGURE_ENVS) \
		./configure \
		--build=$(GNU_HOST_NAME) \
		--host=$(GNU_TARGET_NAME) \
		--target=$(GNU_TARGET_NAME) \
		--prefix=/opt \
		--with-wwwroot=/opt/share/www/cherokee \
		$(CHEROKEE_CONFIGURE_OPTIONS) \
		--without-mysql \
		--disable-nls \
		--disable-static \
	)
	$(PATCH_LIBTOOL) $(@D)/libtool
#	sed -i 's|^hardcode_libdir_flag_spec=.*$$|hardcode_libdir_flag_spec=""|' $(@D)/libtool
	touch $@

cherokee-unpack: $(CHEROKEE_BUILD_DIR)/.configured

#
# This builds the actual binary.
#
$(CHEROKEE_BUILD_DIR)/.built: $(CHEROKEE_BUILD_DIR)/.configured
	rm -f $@
	$(MAKE) -C $(@D)
	touch $@

#
# This is the build convenience target.
#
cherokee: $(CHEROKEE_BUILD_DIR)/.built

#
# If you are building a library, then you need to stage it too.
#
$(CHEROKEE_BUILD_DIR)/.staged: $(CHEROKEE_BUILD_DIR)/.built
	rm -f $@
	$(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install
	touch $@

cherokee-stage: $(CHEROKEE_BUILD_DIR)/.staged

#
# This rule creates a control file for ipkg.  It is no longer
# necessary to create a seperate control file under sources/cherokee
#
$(CHEROKEE_IPK_DIR)/CONTROL/control:
	@install -d $(@D)
	@rm -f $@
	@echo "Package: cherokee" >>$@
	@echo "Architecture: $(TARGET_ARCH)" >>$@
	@echo "Priority: $(CHEROKEE_PRIORITY)" >>$@
	@echo "Section: $(CHEROKEE_SECTION)" >>$@
	@echo "Version: $(CHEROKEE_VERSION)-$(CHEROKEE_IPK_VERSION)" >>$@
	@echo "Maintainer: $(CHEROKEE_MAINTAINER)" >>$@
	@echo "Source: $(CHEROKEE_SITE)/$(CHEROKEE_SOURCE)" >>$@
	@echo "Description: $(CHEROKEE_DESCRIPTION)" >>$@
	@echo "Depends: $(CHEROKEE_DEPENDS)" >>$@
	@echo "Suggests: $(CHEROKEE_SUGGESTS)" >>$@
	@echo "Conflicts: $(CHEROKEE_CONFLICTS)" >>$@

$(CHEROKEE-ADMIN_IPK_DIR)/CONTROL/control:
	@install -d $(@D)
	@rm -f $@
	@echo "Package: cherokee-admin" >>$@
	@echo "Architecture: $(TARGET_ARCH)" >>$@
	@echo "Priority: $(CHEROKEE_PRIORITY)" >>$@
	@echo "Section: $(CHEROKEE_SECTION)" >>$@
	@echo "Version: $(CHEROKEE_VERSION)-$(CHEROKEE_IPK_VERSION)" >>$@
	@echo "Maintainer: $(CHEROKEE_MAINTAINER)" >>$@
	@echo "Source: $(CHEROKEE_SITE)/$(CHEROKEE_SOURCE)" >>$@
	@echo "Description: admin web app for cherokee web server" >>$@
	@echo "Depends: cherokee, python" >>$@
	@echo "Suggests: " >>$@
	@echo "Conflicts: " >>$@

$(CHEROKEE-DEV_IPK_DIR)/CONTROL/control:
	@install -d $(@D)
	@rm -f $@
	@echo "Package: cherokee-dev" >>$@
	@echo "Architecture: $(TARGET_ARCH)" >>$@
	@echo "Priority: $(CHEROKEE_PRIORITY)" >>$@
	@echo "Section: $(CHEROKEE_SECTION)" >>$@
	@echo "Version: $(CHEROKEE_VERSION)-$(CHEROKEE_IPK_VERSION)" >>$@
	@echo "Maintainer: $(CHEROKEE_MAINTAINER)" >>$@
	@echo "Source: $(CHEROKEE_SITE)/$(CHEROKEE_SOURCE)" >>$@
	@echo "Description: Development files for cherokee web server" >>$@
	@echo "Depends: cherokee" >>$@
	@echo "Suggests: " >>$@
	@echo "Conflicts: " >>$@

$(CHEROKEE-DOC_IPK_DIR)/CONTROL/control:
	@install -d $(@D)
	@rm -f $@
	@echo "Package: cherokee-doc" >>$@
	@echo "Architecture: $(TARGET_ARCH)" >>$@
	@echo "Priority: $(CHEROKEE_PRIORITY)" >>$@
	@echo "Section: $(CHEROKEE_SECTION)" >>$@
	@echo "Version: $(CHEROKEE_VERSION)-$(CHEROKEE_IPK_VERSION)" >>$@
	@echo "Maintainer: $(CHEROKEE_MAINTAINER)" >>$@
	@echo "Source: $(CHEROKEE_SITE)/$(CHEROKEE_SOURCE)" >>$@
	@echo "Description: Documentation for cherokee web server" >>$@
	@echo "Depends: " >>$@
	@echo "Suggests: " >>$@
	@echo "Conflicts: " >>$@

#
# This builds the IPK file.
#
# Binaries should be installed into $(CHEROKEE_IPK_DIR)/opt/sbin or $(CHEROKEE_IPK_DIR)/opt/bin
# (use the location in a well-known Linux distro as a guide for choosing sbin or bin).
# Libraries and include files should be installed into $(CHEROKEE_IPK_DIR)/opt/{lib,include}
# Configuration files should be installed in $(CHEROKEE_IPK_DIR)/opt/etc/cherokee/...
# Documentation files should be installed in $(CHEROKEE_IPK_DIR)/opt/doc/cherokee/...
# Daemon startup scripts should be installed in $(CHEROKEE_IPK_DIR)/opt/etc/init.d/S??cherokee
#
# You may need to patch your application to make it use these locations.
#
$(CHEROKEE_IPK) $(CHEROKEE-ADMIN_IPK) $(CHEROKEE-DEV_IPK) $(CHEROKEE-DOC_IPK): $(CHEROKEE_BUILD_DIR)/.built
	rm -rf $(CHEROKEE_IPK_DIR) $(BUILD_DIR)/cherokee_*_$(TARGET_ARCH).ipk
	rm -rf $(CHEROKEE-ADMIN_IPK_DIR) $(BUILD_DIR)/cherokee-admin_*_$(TARGET_ARCH).ipk
	rm -rf $(CHEROKEE-DEV_IPK_DIR) $(BUILD_DIR)/cherokee-dev_*_$(TARGET_ARCH).ipk
	rm -rf $(CHEROKEE-DOC_IPK_DIR) $(BUILD_DIR)/cherokee-doc_*_$(TARGET_ARCH).ipk
	#
	$(MAKE) -C $(CHEROKEE_BUILD_DIR) DESTDIR=$(CHEROKEE_IPK_DIR) install-strip
	rm $(CHEROKEE_IPK_DIR)/opt/lib/*.la $(CHEROKEE_IPK_DIR)/opt/lib/cherokee/*.la
	install -d $(CHEROKEE_IPK_DIR)/opt/share/cherokee/cgi-bin
	sed -i \
		-e '/server.*port =/s|=.*|= 8008|'\
		-e 's|= php-cgi |= /opt/bin/php-fcgi |' \
		$(CHEROKEE_IPK_DIR)/opt/etc/cherokee/cherokee.conf
	install -d $(CHEROKEE_IPK_DIR)/opt/etc/init.d
	install -m 755 $(CHEROKEE_SOURCE_DIR)/rc.cherokee $(CHEROKEE_IPK_DIR)/opt/etc/init.d/S80cherokee
	install -d $(CHEROKEE_IPK_DIR)/opt/etc/default
	echo "CHEROKEE_ENABLE=yes" > $(CHEROKEE_IPK_DIR)/opt/etc/default/cherokee
	# -admin
	install -d $(CHEROKEE-ADMIN_IPK_DIR)/opt/share/cherokee
	mv $(CHEROKEE_IPK_DIR)/opt/share/cherokee/admin $(CHEROKEE-ADMIN_IPK_DIR)/opt/share/cherokee/admin
	install -d $(CHEROKEE-ADMIN_IPK_DIR)/opt/sbin
	mv $(CHEROKEE_IPK_DIR)/opt/sbin/cherokee-admin $(CHEROKEE-ADMIN_IPK_DIR)/opt/sbin/
	$(MAKE) $(CHEROKEE-ADMIN_IPK_DIR)/CONTROL/control
	install -m 755 $(CHEROKEE_SOURCE_DIR)/postinst-admin $(CHEROKEE-ADMIN_IPK_DIR)/CONTROL/postinst
	cd $(BUILD_DIR); $(IPKG_BUILD) $(CHEROKEE-ADMIN_IPK_DIR)
	# -dev
	install -d $(CHEROKEE-DEV_IPK_DIR)/opt/bin
	mv $(CHEROKEE_IPK_DIR)/opt/bin/cherokee-config $(CHEROKEE-DEV_IPK_DIR)/opt/bin/
	install -d $(CHEROKEE-DEV_IPK_DIR)/opt/include
	mv $(CHEROKEE_IPK_DIR)/opt/include/cherokee $(CHEROKEE-DEV_IPK_DIR)/opt/include/cherokee
	install -d $(CHEROKEE-DEV_IPK_DIR)/opt/lib
	mv $(CHEROKEE_IPK_DIR)/opt/lib/pkgconfig $(CHEROKEE-DEV_IPK_DIR)/opt/lib/pkgconfig
	install -d $(CHEROKEE-DEV_IPK_DIR)/opt/share/man/man1
	mv $(CHEROKEE_IPK_DIR)/opt/share/man/man1/cherokee-config.1 $(CHEROKEE-DEV_IPK_DIR)/opt/share/man/man1/
	mv $(CHEROKEE_IPK_DIR)/opt/share/aclocal $(CHEROKEE-DEV_IPK_DIR)/opt/share/aclocal
	$(MAKE) $(CHEROKEE-DEV_IPK_DIR)/CONTROL/control
	cd $(BUILD_DIR); $(IPKG_BUILD) $(CHEROKEE-DEV_IPK_DIR)
	# -doc
	install -d $(CHEROKEE-DOC_IPK_DIR)/opt/share
	mv $(CHEROKEE_IPK_DIR)/opt/share/doc $(CHEROKEE-DOC_IPK_DIR)/opt/share/doc
	$(MAKE) $(CHEROKEE-DOC_IPK_DIR)/CONTROL/control
	cd $(BUILD_DIR); $(IPKG_BUILD) $(CHEROKEE-DOC_IPK_DIR)
	# main
	$(MAKE) $(CHEROKEE_IPK_DIR)/CONTROL/control
	install -m 755 $(CHEROKEE_SOURCE_DIR)/preinst $(CHEROKEE_IPK_DIR)/CONTROL/
	install -m 755 $(CHEROKEE_SOURCE_DIR)/postinst $(CHEROKEE_IPK_DIR)/CONTROL/
	install -m 755 $(CHEROKEE_SOURCE_DIR)/prerm $(CHEROKEE_IPK_DIR)/CONTROL/
	echo $(CHEROKEE_CONFFILES) | sed -e 's/ /\n/g' > $(CHEROKEE_IPK_DIR)/CONTROL/conffiles
	cd $(BUILD_DIR); $(IPKG_BUILD) $(CHEROKEE_IPK_DIR)

#
# This is called from the top level makefile to create the IPK file.
#
cherokee-ipk: $(CHEROKEE_IPK) $(CHEROKEE-ADMIN_IPK) $(CHEROKEE-DEV_IPK) $(CHEROKEE-DOC_IPK)

#
# This is called from the top level makefile to clean all of the built files.
#
cherokee-clean:
	rm -f $(CHEROKEE_BUILD_DIR)/.built
	-$(MAKE) -C $(CHEROKEE_BUILD_DIR) clean

#
# This is called from the top level makefile to clean all dynamically created
# directories.
#
cherokee-dirclean:
	rm -rf $(BUILD_DIR)/$(CHEROKEE_DIR) $(CHEROKEE_BUILD_DIR)
	rm -rf $(CHEROKEE_IPK_DIR) $(CHEROKEE_IPK)
	rm -rf $(CHEROKEE-ADMIN_IPK_DIR) $(CHEROKEE-ADMIN_IPK)
	rm -rf $(CHEROKEE-DEV_IPK_DIR) $(CHEROKEE-DEV_IPK)
	rm -rf $(CHEROKEE-DOC_IPK_DIR) $(CHEROKEE-DOC_IPK)

#
# Some sanity check for the package.
#
cherokee-check: $(CHEROKEE_IPK) $(CHEROKEE-ADMIN_IPK) $(CHEROKEE-DEV_IPK) $(CHEROKEE-DOC_IPK)
	perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $^