########################################################### # # bzr-rewrite # ########################################################### # # BZR-REWRITE_VERSION, BZR-REWRITE_SITE and BZR-REWRITE_SOURCE define # the upstream location of the source code for the package. # BZR-REWRITE_DIR is the directory which is created when the source # archive is unpacked. # BZR-REWRITE_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # BZR-REWRITE_VERSION=0.6.2 BZR-REWRITE_SITE=http://samba.org/~jelmer/bzr BZR-REWRITE_SOURCE=bzr-rewrite-$(BZR-REWRITE_VERSION).tar.gz BZR-REWRITE_DIR=bzr-rewrite-$(BZR-REWRITE_VERSION) BZR-REWRITE_UNZIP=zcat BZR-REWRITE_MAINTAINER=NSLU2 Linux BZR-REWRITE_DESCRIPTION=Revision rewrite plugin for bzr. BZR-REWRITE_SECTION=devel BZR-REWRITE_PRIORITY=optional PY25-BZR-REWRITE_DEPENDS=py25-bzr PY26-BZR-REWRITE_DEPENDS=py26-bzr BZR-REWRITE_CONFLICTS= # # BZR-REWRITE_IPK_VERSION should be incremented when the ipk changes. # BZR-REWRITE_IPK_VERSION=1 # # BZR-REWRITE_CONFFILES should be a list of user-editable files #BZR-REWRITE_CONFFILES=/opt/etc/bzr-rewrite.conf /opt/etc/init.d/SXXbzr-rewrite # # BZR-REWRITE_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # #BZR-REWRITE_PATCHES=$(BZR-REWRITE_SOURCE_DIR)/configure.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # BZR-REWRITE_CPPFLAGS= BZR-REWRITE_LDFLAGS= # # BZR-REWRITE_BUILD_DIR is the directory in which the build is done. # BZR-REWRITE_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # BZR-REWRITE_IPK_DIR is the directory in which the ipk is built. # BZR-REWRITE_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # BZR-REWRITE_BUILD_DIR=$(BUILD_DIR)/bzr-rewrite BZR-REWRITE_SOURCE_DIR=$(SOURCE_DIR)/bzr-rewrite PY25-BZR-REWRITE_IPK_DIR=$(BUILD_DIR)/py25-bzr-rewrite-$(BZR-REWRITE_VERSION)-ipk PY25-BZR-REWRITE_IPK=$(BUILD_DIR)/py25-bzr-rewrite_$(BZR-REWRITE_VERSION)-$(BZR-REWRITE_IPK_VERSION)_$(TARGET_ARCH).ipk PY26-BZR-REWRITE_IPK_DIR=$(BUILD_DIR)/py26-bzr-rewrite-$(BZR-REWRITE_VERSION)-ipk PY26-BZR-REWRITE_IPK=$(BUILD_DIR)/py26-bzr-rewrite_$(BZR-REWRITE_VERSION)-$(BZR-REWRITE_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: bzr-rewrite-source bzr-rewrite-unpack bzr-rewrite bzr-rewrite-stage bzr-rewrite-ipk bzr-rewrite-clean bzr-rewrite-dirclean bzr-rewrite-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(BZR-REWRITE_SOURCE): $(WGET) -P $(@D) $(BZR-REWRITE_SITE)/$(@F) || \ $(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # bzr-rewrite-source: $(DL_DIR)/$(BZR-REWRITE_SOURCE) $(BZR-REWRITE_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # $(BZR-REWRITE_BUILD_DIR)/.configured: $(DL_DIR)/$(BZR-REWRITE_SOURCE) $(BZR-REWRITE_PATCHES) make/bzr-rewrite.mk $(MAKE) py-setuptools-stage rm -rf $(@D) mkdir -p $(@D) # 2.5 $(BZR-REWRITE_UNZIP) $(DL_DIR)/$(BZR-REWRITE_SOURCE) | tar -C $(BUILD_DIR) -xvf - # cat $(BZR-REWRITE_PATCHES) | patch -d $(BUILD_DIR)/$(BZR-REWRITE_DIR) -p1 mv $(BUILD_DIR)/$(BZR-REWRITE_DIR) $(@D)/2.5 (cd $(@D)/2.5; \ ( \ echo "[build_ext]"; \ echo "include-dirs=$(STAGING_INCLUDE_DIR):$(STAGING_INCLUDE_DIR)/python2.5"; \ echo "library-dirs=$(STAGING_LIB_DIR)"; \ echo "rpath=/opt/lib"; \ echo "[build_scripts]"; \ echo "executable=/opt/bin/python2.5"; \ echo "[install]"; \ echo "install_scripts=/opt/bin"; \ ) >> setup.cfg; \ ) # 2.6 $(BZR-REWRITE_UNZIP) $(DL_DIR)/$(BZR-REWRITE_SOURCE) | tar -C $(BUILD_DIR) -xvf - # cat $(BZR-REWRITE_PATCHES) | patch -d $(BUILD_DIR)/$(BZR-REWRITE_DIR) -p1 mv $(BUILD_DIR)/$(BZR-REWRITE_DIR) $(@D)/2.6 (cd $(@D)/2.6; \ ( \ echo "[build_ext]"; \ echo "include-dirs=$(STAGING_INCLUDE_DIR):$(STAGING_INCLUDE_DIR)/python2.6"; \ echo "library-dirs=$(STAGING_LIB_DIR)"; \ echo "rpath=/opt/lib"; \ echo "[build_scripts]"; \ echo "executable=/opt/bin/python2.6"; \ echo "[install]"; \ echo "install_scripts=/opt/bin"; \ ) >> setup.cfg; \ ) touch $@ bzr-rewrite-unpack: $(BZR-REWRITE_BUILD_DIR)/.configured # # This builds the actual binary. # $(BZR-REWRITE_BUILD_DIR)/.built: $(BZR-REWRITE_BUILD_DIR)/.configured rm -f $@ (cd $(@D)/2.5; \ $(TARGET_CONFIGURE_OPTS) LDSHARED='$(TARGET_CC) -shared' \ $(HOST_STAGING_PREFIX)/bin/python2.5 setup.py build; \ ) (cd $(@D)/2.6; \ $(TARGET_CONFIGURE_OPTS) LDSHARED='$(TARGET_CC) -shared' \ $(HOST_STAGING_PREFIX)/bin/python2.6 setup.py build; \ ) touch $@ # # This is the build convenience target. # bzr-rewrite: $(BZR-REWRITE_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # #$(BZR-REWRITE_BUILD_DIR)/.staged: $(BZR-REWRITE_BUILD_DIR)/.built # rm -f $@ # $(MAKE) -C $(BZR-REWRITE_BUILD_DIR) DESTDIR=$(STAGING_DIR) install # touch $@ # #bzr-rewrite-stage: $(BZR-REWRITE_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/bzr-rewrite # $(PY25-BZR-REWRITE_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: py25-bzr-rewrite" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(BZR-REWRITE_PRIORITY)" >>$@ @echo "Section: $(BZR-REWRITE_SECTION)" >>$@ @echo "Version: $(BZR-REWRITE_VERSION)-$(BZR-REWRITE_IPK_VERSION)" >>$@ @echo "Maintainer: $(BZR-REWRITE_MAINTAINER)" >>$@ @echo "Source: $(BZR-REWRITE_SITE)/$(BZR-REWRITE_SOURCE)" >>$@ @echo "Description: $(BZR-REWRITE_DESCRIPTION)" >>$@ @echo "Depends: $(PY25-BZR-REWRITE_DEPENDS)" >>$@ @echo "Conflicts: $(BZR-REWRITE_CONFLICTS)" >>$@ $(PY26-BZR-REWRITE_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: py26-bzr-rewrite" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(BZR-REWRITE_PRIORITY)" >>$@ @echo "Section: $(BZR-REWRITE_SECTION)" >>$@ @echo "Version: $(BZR-REWRITE_VERSION)-$(BZR-REWRITE_IPK_VERSION)" >>$@ @echo "Maintainer: $(BZR-REWRITE_MAINTAINER)" >>$@ @echo "Source: $(BZR-REWRITE_SITE)/$(BZR-REWRITE_SOURCE)" >>$@ @echo "Description: $(BZR-REWRITE_DESCRIPTION)" >>$@ @echo "Depends: $(PY26-BZR-REWRITE_DEPENDS)" >>$@ @echo "Conflicts: $(BZR-REWRITE_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(BZR-REWRITE_IPK_DIR)/opt/sbin or $(BZR-REWRITE_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(BZR-REWRITE_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(BZR-REWRITE_IPK_DIR)/opt/etc/bzr-rewrite/... # Documentation files should be installed in $(BZR-REWRITE_IPK_DIR)/opt/doc/bzr-rewrite/... # Daemon startup scripts should be installed in $(BZR-REWRITE_IPK_DIR)/opt/etc/init.d/S??bzr-rewrite # # You may need to patch your application to make it use these locations. # $(PY25-BZR-REWRITE_IPK): $(BZR-REWRITE_BUILD_DIR)/.built rm -rf $(BUILD_DIR)/py25-bzr-rebase_*_$(TARGET_ARCH).ipk rm -rf $(PY25-BZR-REWRITE_IPK_DIR) $(BUILD_DIR)/py25-bzr-rewrite_*_$(TARGET_ARCH).ipk (cd $(BZR-REWRITE_BUILD_DIR)/2.5; \ $(HOST_STAGING_PREFIX)/bin/python2.5 setup.py install --root=$(PY25-BZR-REWRITE_IPK_DIR) --prefix=/opt; \ ) # $(STRIP_COMMAND) $(PY25-BZR-REWRITE_IPK_DIR)/opt/lib/python2.5/site-packages/bzrlib/*.so $(MAKE) $(PY25-BZR-REWRITE_IPK_DIR)/CONTROL/control cd $(BUILD_DIR); $(IPKG_BUILD) $(PY25-BZR-REWRITE_IPK_DIR) $(PY26-BZR-REWRITE_IPK): $(BZR-REWRITE_BUILD_DIR)/.built rm -rf $(BUILD_DIR)/py26-bzr-rebase_*_$(TARGET_ARCH).ipk rm -rf $(PY26-BZR-REWRITE_IPK_DIR) $(BUILD_DIR)/py26-bzr-rewrite_*_$(TARGET_ARCH).ipk (cd $(BZR-REWRITE_BUILD_DIR)/2.6; \ $(HOST_STAGING_PREFIX)/bin/python2.6 setup.py install --root=$(PY26-BZR-REWRITE_IPK_DIR) --prefix=/opt; \ ) # $(STRIP_COMMAND) $(PY26-BZR-REWRITE_IPK_DIR)/opt/lib/python2.6/site-packages/bzrlib/*.so $(MAKE) $(PY26-BZR-REWRITE_IPK_DIR)/CONTROL/control cd $(BUILD_DIR); $(IPKG_BUILD) $(PY26-BZR-REWRITE_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # bzr-rewrite-ipk: $(PY25-BZR-REWRITE_IPK) $(PY26-BZR-REWRITE_IPK) # # This is called from the top level makefile to clean all of the built files. # bzr-rewrite-clean: -$(MAKE) -C $(BZR-REWRITE_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # bzr-rewrite-dirclean: rm -rf $(BUILD_DIR)/$(BZR-REWRITE_DIR) $(BZR-REWRITE_BUILD_DIR) rm -rf $(PY25-BZR-REWRITE_IPK_DIR) $(PY25-BZR-REWRITE_IPK) rm -rf $(PY26-BZR-REWRITE_IPK_DIR) $(PY26-BZR-REWRITE_IPK) # # Some sanity check for the package. # bzr-rewrite-check: $(PY25-BZR-REWRITE_IPK) $(PY26-BZR-REWRITE_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $^