########################################################### # # asterisk14-moh-opsound-ulaw # ########################################################### # # ASTERISK14_MOH_OPSOUND_ULAW_VERSION, ASTERISK14_MOH_OPSOUND_ULAW_SITE and ASTERISK14_MOH_OPSOUND_ULAW_SOURCE define # the upstream location of the source code for the package. # ASTERISK14_MOH_OPSOUND_ULAW_DIR is the directory which is created when the source # archive is unpacked. # ASTERISK14_MOH_OPSOUND_ULAW_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # ASTERISK14_MOH_OPSOUND_ULAW_SITE=http://downloads.asterisk.org/pub/telephony/sounds/releases/ ASTERISK14_MOH_OPSOUND_ULAW_VERSION=2.03 #ASTERISK14_MOH_OPSOUND_ULAW_SOURCE=asterisk-moh-opsound-ulaw-$(ASTERISK14_MOH_OPSOUND_ULAW_VERSION).tar.gz ASTERISK14_MOH_OPSOUND_ULAW_SOURCE=asterisk-moh-opsound-ulaw.tar.gz ASTERISK14_MOH_OPSOUND_ULAW_DIR=asterisk-moh-opsound-ulaw-$(ASTERISK14_MOH_OPSOUND_ULAW_VERSION) ASTERISK14_MOH_OPSOUND_ULAW_UNZIP=zcat ASTERISK14_MOH_OPSOUND_ULAW_MAINTAINER=Ovidiu Sas ASTERISK14_MOH_OPSOUND_ULAW_DESCRIPTION=asterisk-moh-opsound-ulaw ASTERISK14_MOH_OPSOUND_ULAW_SECTION=misc ASTERISK14_MOH_OPSOUND_ULAW_PRIORITY=optional ASTERISK14_MOH_OPSOUND_ULAW_DEPENDS= ASTERISK14_MOH_OPSOUND_ULAW_SUGGESTS= ASTERISK14_MOH_OPSOUND_ULAW_CONFLICTS=asterisk-sounds,asterisk14-moh-freeplay-ulaw # # ASTERISK14_MOH_OPSOUND_ULAW_IPK_VERSION should be incremented when the ipk changes. # ASTERISK14_MOH_OPSOUND_ULAW_IPK_VERSION=1 # # ASTERISK14_MOH_OPSOUND_ULAW_CONFFILES should be a list of user-editable files #ASTERISK14_MOH_OPSOUND_ULAW_CONFFILES=/opt/etc/asterisk14-moh-opsound-ulaw.conf /opt/etc/init.d/SXXasterisk14-moh-opsound-ulaw # # ASTERISK14_MOH_OPSOUND_ULAW_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # #ASTERISK14_MOH_OPSOUND_ULAW_PATCHES=$(ASTERISK14_MOH_OPSOUND_ULAW_SOURCE_DIR)/configure.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # ASTERISK14_MOH_OPSOUND_ULAW_CPPFLAGS= ASTERISK14_MOH_OPSOUND_ULAW_LDFLAGS= # # ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR is the directory in which the build is done. # ASTERISK14_MOH_OPSOUND_ULAW_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # ASTERISK14_MOH_OPSOUND_ULAW_IPK_DIR is the directory in which the ipk is built. # ASTERISK14_MOH_OPSOUND_ULAW_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR=$(BUILD_DIR)/asterisk14-moh-opsound-ulaw ASTERISK14_MOH_OPSOUND_ULAW_SOURCE_DIR=$(SOURCE_DIR)/asterisk14-moh-opsound-ulaw ASTERISK14_MOH_OPSOUND_ULAW_IPK_DIR=$(BUILD_DIR)/asterisk14-moh-opsound-ulaw-$(ASTERISK14_MOH_OPSOUND_ULAW_VERSION)-ipk ASTERISK14_MOH_OPSOUND_ULAW_IPK=$(BUILD_DIR)/asterisk14-moh-opsound-ulaw_$(ASTERISK14_MOH_OPSOUND_ULAW_VERSION)-$(ASTERISK14_MOH_OPSOUND_ULAW_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: asterisk14-moh-opsound-ulaw-source asterisk14-moh-opsound-ulaw-unpack asterisk14-moh-opsound-ulaw asterisk14-moh-opsound-ulaw-stage asterisk14-moh-opsound-ulaw-ipk asterisk14-moh-opsound-ulaw-clean asterisk14-moh-opsound-ulaw-dirclean asterisk14-moh-opsound-ulaw-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(ASTERISK14_MOH_OPSOUND_ULAW_SOURCE): $(WGET) -P $(DL_DIR) $(ASTERISK14_MOH_OPSOUND_ULAW_SITE)/$(@F) || \ $(WGET) -P $(DL_DIR) $(SOURCES_NLO_SITE)/$(@F) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # #asterisk14-moh-opsound-ulaw-source: $(DL_DIR)/$(ASTERISK14_MOH_OPSOUND_ULAW_SOURCE) $(ASTERISK14_MOH_OPSOUND_ULAW_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)/.configured: $(DL_DIR)/$(ASTERISK14_MOH_OPSOUND_ULAW_SOURCE) $(ASTERISK14_MOH_OPSOUND_ULAW_PATCHES) make/asterisk14-moh-opsound-ulaw.mk #$(MAKE) -stage -stage rm -rf $(BUILD_DIR)/$(ASTERISK14_MOH_OPSOUND_ULAW_DIR) $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR) mkdir -p $(BUILD_DIR)/$(ASTERISK14_MOH_OPSOUND_ULAW_DIR); $(ASTERISK14_MOH_OPSOUND_ULAW_UNZIP) $(DL_DIR)/$(ASTERISK14_MOH_OPSOUND_ULAW_SOURCE) | tar -C $(BUILD_DIR)/$(ASTERISK14_MOH_OPSOUND_ULAW_DIR) -xvf - if test -n "$(ASTERISK14_MOH_OPSOUND_ULAW_PATCHES)" ; \ then cat $(ASTERISK14_MOH_OPSOUND_ULAW_PATCHES) | \ patch -d $(BUILD_DIR)/$(ASTERISK14_MOH_OPSOUND_ULAW_DIR) -p0 ; \ fi if test "$(BUILD_DIR)/$(ASTERISK14_MOH_OPSOUND_ULAW_DIR)" != "$(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)" ; \ then mv $(BUILD_DIR)/$(ASTERISK14_MOH_OPSOUND_ULAW_DIR) $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR) ; \ fi touch $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)/.configured asterisk14-moh-opsound-ulaw-unpack: $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)/.configured # # This builds the actual binary. # $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)/.built: $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)/.configured rm -f $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)/.built touch $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)/.built # # This is the build convenience target. # asterisk14-moh-opsound-ulaw: $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)/.staged: $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)/.built rm -f $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)/.staged touch $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)/.staged asterisk14-moh-opsound-ulaw-stage: $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/asterisk14-moh-opsound-ulaw # $(ASTERISK14_MOH_OPSOUND_ULAW_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: asterisk14-moh-opsound-ulaw" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(ASTERISK14_MOH_OPSOUND_ULAW_PRIORITY)" >>$@ @echo "Section: $(ASTERISK14_MOH_OPSOUND_ULAW_SECTION)" >>$@ @echo "Version: $(ASTERISK14_MOH_OPSOUND_ULAW_VERSION)-$(ASTERISK14_MOH_OPSOUND_ULAW_IPK_VERSION)" >>$@ @echo "Maintainer: $(ASTERISK14_MOH_OPSOUND_ULAW_MAINTAINER)" >>$@ @echo "Source: $(ASTERISK14_MOH_OPSOUND_ULAW_SITE)/$(ASTERISK14_MOH_OPSOUND_ULAW_SOURCE)" >>$@ @echo "Description: $(ASTERISK14_MOH_OPSOUND_ULAW_DESCRIPTION)" >>$@ @echo "Depends: $(ASTERISK14_MOH_OPSOUND_ULAW_DEPENDS)" >>$@ @echo "Suggests: $(ASTERISK14_MOH_OPSOUND_ULAW_SUGGESTS)" >>$@ @echo "Conflicts: $(ASTERISK14_MOH_OPSOUND_ULAW_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(ASTERISK14_MOH_OPSOUND_ULAW_IPK_DIR)/opt/sbin or $(ASTERISK14_MOH_OPSOUND_ULAW_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(ASTERISK14_MOH_OPSOUND_ULAW_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(ASTERISK14_MOH_OPSOUND_ULAW_IPK_DIR)/opt/etc/asterisk14-moh-opsound-ulaw/... # Documentation files should be installed in $(ASTERISK14_MOH_OPSOUND_ULAW_IPK_DIR)/opt/doc/asterisk14-moh-opsound-ulaw/... # Daemon startup scripts should be installed in $(ASTERISK14_MOH_OPSOUND_ULAW_IPK_DIR)/opt/etc/init.d/S??asterisk14-moh-opsound-ulaw # # You may need to patch your application to make it use these locations. # $(ASTERISK14_MOH_OPSOUND_ULAW_IPK): $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)/.built rm -rf $(ASTERISK14_MOH_OPSOUND_ULAW_IPK_DIR) $(BUILD_DIR)/asterisk14-moh-opsound-ulaw_*_$(TARGET_ARCH).ipk $(MAKE) $(ASTERISK14_MOH_OPSOUND_ULAW_IPK_DIR)/CONTROL/control install -d $(ASTERISK14_MOH_OPSOUND_ULAW_IPK_DIR)/opt/var/lib/asterisk/moh install -m 644 $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)/*ulaw $(ASTERISK14_MOH_OPSOUND_ULAW_IPK_DIR)/opt/var/lib/asterisk/moh cd $(BUILD_DIR); $(IPKG_BUILD) $(ASTERISK14_MOH_OPSOUND_ULAW_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # asterisk14-moh-opsound-ulaw-ipk: $(ASTERISK14_MOH_OPSOUND_ULAW_IPK) # # This is called from the top level makefile to clean all of the built files. # asterisk14-moh-opsound-ulaw-clean: rm -f $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR)/.built # # This is called from the top level makefile to clean all dynamically created # directories. asterisk14-moh-opsound-ulaw-dirclean: rm -rf $(BUILD_DIR)/$(ASTERISK14_MOH_OPSOUND_ULAW_DIR) $(ASTERISK14_MOH_OPSOUND_ULAW_BUILD_DIR) $(ASTERISK14_MOH_OPSOUND_ULAW_IPK_DIR) $(ASTERISK14_MOH_OPSOUND_ULAW_IPK) # # # Some sanity check for the package. # asterisk14-moh-opsound-ulaw-check: $(ASTERISK14_MOH_OPSOUND_ULAW_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $(ASTERISK14_MOH_OPSOUND_ULAW_IPK)