########################################################### # # aria2 # ########################################################### # # ARIA2_VERSION, ARIA2_SITE and ARIA2_SOURCE define # the upstream location of the source code for the package. # ARIA2_DIR is the directory which is created when the source # archive is unpacked. # ARIA2_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # ARIA2_SITE=http://$(SOURCEFORGE_MIRROR)/sourceforge/aria2 ARIA2_VERSION=$(strip \ $(if $(filter 3, $(firstword $(subst ., ,$(TARGET_CC_VER)))), 1.4.1, 1.9.0)) ARIA2_SOURCE=aria2-$(ARIA2_VERSION).tar.bz2 ARIA2_DIR=aria2-$(ARIA2_VERSION) ARIA2_UNZIP=bzcat ARIA2_MAINTAINER=NSLU2 Linux ARIA2_DESCRIPTION=A utility for downloading files. The supported protocols are HTTP(S), FTP, BitTorrent (DHT, PEX, MSE/PE), and Metalink. ARIA2_SECTION=net ARIA2_PRIORITY=optional ARIA2_DEPENDS=c-ares, libstdc++, libxml2, openssl, sqlite, zlib ifneq (, $(filter libiconv, $(PACKAGES))) ARIA2_DEPENDS += , libiconv endif ARIA2_SUGGESTS= ARIA2_CONFLICTS= # # ARIA2_IPK_VERSION should be incremented when the ipk changes. # ARIA2_IPK_VERSION=1 # # ARIA2_CONFFILES should be a list of user-editable files #ARIA2_CONFFILES=/opt/etc/aria2.conf /opt/etc/init.d/SXXaria2 # # ARIA2_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # #ARIA2_PATCHES=$(ARIA2_SOURCE_DIR)/configure.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # ARIA2_CPPFLAGS= ARIA2_LDFLAGS= ifeq ($(HOSTCC), $(TARGET_CC)) ARIA2_CONFIGURE_ENVS= else ARIA2_CONFIGURE_ENVS=ac_cv_func_malloc_0_nonnull=yes ac_cv_func_realloc_0_nonnull=yes endif ifeq ($(LIBC_STYLE), uclibc) ifdef TARGET_GXX ARIA2_CONFIGURE_ENVS += CXX=$(TARGET_GXX) endif endif # # ARIA2_BUILD_DIR is the directory in which the build is done. # ARIA2_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # ARIA2_IPK_DIR is the directory in which the ipk is built. # ARIA2_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # ARIA2_BUILD_DIR=$(BUILD_DIR)/aria2 ARIA2_SOURCE_DIR=$(SOURCE_DIR)/aria2 ARIA2_IPK_DIR=$(BUILD_DIR)/aria2-$(ARIA2_VERSION)-ipk ARIA2_IPK=$(BUILD_DIR)/aria2_$(ARIA2_VERSION)-$(ARIA2_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: aria2-source aria2-unpack aria2 aria2-stage aria2-ipk aria2-clean aria2-dirclean aria2-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(ARIA2_SOURCE): $(WGET) -P $(@D) $(ARIA2_SITE)/$(@F) || \ $(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # aria2-source: $(DL_DIR)/$(ARIA2_SOURCE) $(ARIA2_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # $(ARIA2_BUILD_DIR)/.configured: $(DL_DIR)/$(ARIA2_SOURCE) $(ARIA2_PATCHES) make/aria2.mk $(MAKE) c-ares-stage libstdc++-stage libxml2-stage openssl-stage sqlite-stage zlib-stage ifneq (, $(filter libiconv, $(PACKAGES))) $(MAKE) libiconv-stage endif rm -rf $(BUILD_DIR)/$(ARIA2_DIR) $(@D) $(ARIA2_UNZIP) $(DL_DIR)/$(ARIA2_SOURCE) | tar -C $(BUILD_DIR) -xvf - if test -n "$(ARIA2_PATCHES)" ; \ then cat $(ARIA2_PATCHES) | \ patch -d $(BUILD_DIR)/$(ARIA2_DIR) -p0 ; \ fi if test "$(BUILD_DIR)/$(ARIA2_DIR)" != "$(@D)" ; \ then mv $(BUILD_DIR)/$(ARIA2_DIR) $(@D) ; \ fi (cd $(@D); \ $(TARGET_CONFIGURE_OPTS) \ $(ARIA2_CONFIGURE_ENVS) \ CPPFLAGS="$(STAGING_CPPFLAGS) $(ARIA2_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(ARIA2_LDFLAGS)" \ PATH="$(STAGING_PREFIX)/bin:$$PATH" \ PKG_CONFIG_PATH=$(STAGING_LIB_DIR)/pkgconfig \ ./configure \ --build=$(GNU_HOST_NAME) \ --host=$(GNU_TARGET_NAME) \ --target=$(GNU_TARGET_NAME) \ --prefix=/opt \ --without-gnutls \ --without-libexpat \ --with-openssl \ --with-openssl-prefix=$(STAGING_PREFIX) \ --with-libxml2 \ --with-xml-prefix=$(STAGING_PREFIX) \ --with-libcares \ --with-libcares-prefix=$(STAGING_PREFIX) \ --with-libz-prefix=$(STAGING_PREFIX) \ --disable-nls \ --disable-static \ ) # $(PATCH_LIBTOOL) $(@D)/libtool touch $@ aria2-unpack: $(ARIA2_BUILD_DIR)/.configured # # This builds the actual binary. # $(ARIA2_BUILD_DIR)/.built: $(ARIA2_BUILD_DIR)/.configured rm -f $@ $(MAKE) -C $(@D) touch $@ # # This is the build convenience target. # aria2: $(ARIA2_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(ARIA2_BUILD_DIR)/.staged: $(ARIA2_BUILD_DIR)/.built rm -f $@ $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install touch $@ aria2-stage: $(ARIA2_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/aria2 # $(ARIA2_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: aria2" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(ARIA2_PRIORITY)" >>$@ @echo "Section: $(ARIA2_SECTION)" >>$@ @echo "Version: $(ARIA2_VERSION)-$(ARIA2_IPK_VERSION)" >>$@ @echo "Maintainer: $(ARIA2_MAINTAINER)" >>$@ @echo "Source: $(ARIA2_SITE)/$(ARIA2_SOURCE)" >>$@ @echo "Description: $(ARIA2_DESCRIPTION)" >>$@ @echo "Depends: $(ARIA2_DEPENDS)" >>$@ @echo "Suggests: $(ARIA2_SUGGESTS)" >>$@ @echo "Conflicts: $(ARIA2_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(ARIA2_IPK_DIR)/opt/sbin or $(ARIA2_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(ARIA2_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(ARIA2_IPK_DIR)/opt/etc/aria2/... # Documentation files should be installed in $(ARIA2_IPK_DIR)/opt/doc/aria2/... # Daemon startup scripts should be installed in $(ARIA2_IPK_DIR)/opt/etc/init.d/S??aria2 # # You may need to patch your application to make it use these locations. # $(ARIA2_IPK): $(ARIA2_BUILD_DIR)/.built rm -rf $(ARIA2_IPK_DIR) $(BUILD_DIR)/aria2_*_$(TARGET_ARCH).ipk $(MAKE) -C $(ARIA2_BUILD_DIR) DESTDIR=$(ARIA2_IPK_DIR) transform='' install-strip # install -d $(ARIA2_IPK_DIR)/opt/etc/ # install -m 644 $(ARIA2_SOURCE_DIR)/aria2.conf $(ARIA2_IPK_DIR)/opt/etc/aria2.conf # install -d $(ARIA2_IPK_DIR)/opt/etc/init.d # install -m 755 $(ARIA2_SOURCE_DIR)/rc.aria2 $(ARIA2_IPK_DIR)/opt/etc/init.d/SXXaria2 # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(ARIA2_IPK_DIR)/opt/etc/init.d/SXXaria2 $(MAKE) $(ARIA2_IPK_DIR)/CONTROL/control # install -m 755 $(ARIA2_SOURCE_DIR)/postinst $(ARIA2_IPK_DIR)/CONTROL/postinst # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(ARIA2_IPK_DIR)/CONTROL/postinst # install -m 755 $(ARIA2_SOURCE_DIR)/prerm $(ARIA2_IPK_DIR)/CONTROL/prerm # sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(ARIA2_IPK_DIR)/CONTROL/prerm # if test -n "$(UPD-ALT_PREFIX)"; then \ sed -i -e '/^[ ]*update-alternatives /s|update-alternatives|$(UPD-ALT_PREFIX)/bin/&|' \ $(ARIA2_IPK_DIR)/CONTROL/postinst $(ARIA2_IPK_DIR)/CONTROL/prerm; \ fi echo $(ARIA2_CONFFILES) | sed -e 's/ /\n/g' > $(ARIA2_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(ARIA2_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # aria2-ipk: $(ARIA2_IPK) # # This is called from the top level makefile to clean all of the built files. # aria2-clean: rm -f $(ARIA2_BUILD_DIR)/.built -$(MAKE) -C $(ARIA2_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # aria2-dirclean: rm -rf $(BUILD_DIR)/$(ARIA2_DIR) $(ARIA2_BUILD_DIR) $(ARIA2_IPK_DIR) $(ARIA2_IPK) # # # Some sanity check for the package. # aria2-check: $(ARIA2_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $^