########################################################### # # apcupsd # ########################################################### # # APCUPSD_VERSION, APCUPSD_SITE and APCUPSD_SOURCE define # the upstream location of the source code for the package. # APCUPSD_DIR is the directory which is created when the source # archive is unpacked. # APCUPSD_UNZIP is the command used to unzip the source. # It is usually "zcat" (for .gz) or "bzcat" (for .bz2) # # You should change all these variables to suit your package. # Please make sure that you add a description, and that you # list all your packages' dependencies, seperated by commas. # # If you list yourself as MAINTAINER, please give a valid email # address, and indicate your irc nick if it cannot be easily deduced # from your name or email address. If you leave MAINTAINER set to # "NSLU2 Linux" other developers will feel free to edit. # APCUPSD_SITE=http://$(SOURCEFORGE_MIRROR)/sourceforge/apcupsd APCUPSD_VERSION=3.14.8 APCUPSD_SOURCE=apcupsd-$(APCUPSD_VERSION).tar.gz APCUPSD_DIR=apcupsd-$(APCUPSD_VERSION) APCUPSD_UNZIP=zcat APCUPSD_MAINTAINER=NSLU2 Linux APCUPSD_DESCRIPTION=A daemon for controlling APC UPSes APCUPSD_SECTION=sysadmin APCUPSD_PRIORITY=optional APCUPSD_DEPENDS= APCUPSD_SUGGESTS= APCUPSD_CONFLICTS= # # APCUPSD_IPK_VERSION should be incremented when the ipk changes. # APCUPSD_IPK_VERSION=1 # # APCUPSD_CONFFILES should be a list of user-editable files APCUPSD_CONFFILES=/opt/etc/apcupsd/apcupsd.conf #/opt/etc/init.d/SXXapcupsd # # APCUPSD_PATCHES should list any patches, in the the order in # which they should be applied to the source code. # #APCUPSD_PATCHES=$(APCUPSD_SOURCE_DIR)/configure.patch # # If the compilation of the package requires additional # compilation or linking flags, then list them here. # APCUPSD_CPPFLAGS= APCUPSD_LDFLAGS= # # APCUPSD_BUILD_DIR is the directory in which the build is done. # APCUPSD_SOURCE_DIR is the directory which holds all the # patches and ipkg control files. # APCUPSD_IPK_DIR is the directory in which the ipk is built. # APCUPSD_IPK is the name of the resulting ipk files. # # You should not change any of these variables. # APCUPSD_BUILD_DIR=$(BUILD_DIR)/apcupsd APCUPSD_SOURCE_DIR=$(SOURCE_DIR)/apcupsd APCUPSD_IPK_DIR=$(BUILD_DIR)/apcupsd-$(APCUPSD_VERSION)-ipk APCUPSD_IPK=$(BUILD_DIR)/apcupsd_$(APCUPSD_VERSION)-$(APCUPSD_IPK_VERSION)_$(TARGET_ARCH).ipk APCUPSD-CGI_IPK_DIR=$(BUILD_DIR)/apcupsd-cgi-$(APCUPSD_VERSION)-ipk APCUPSD-CGI_IPK=$(BUILD_DIR)/apcupsd-cgi_$(APCUPSD_VERSION)-$(APCUPSD_IPK_VERSION)_$(TARGET_ARCH).ipk .PHONY: apcupsd-source apcupsd-unpack apcupsd apcupsd-stage apcupsd-ipk apcupsd-clean apcupsd-dirclean apcupsd-check # # This is the dependency on the source code. If the source is missing, # then it will be fetched from the site using wget. # $(DL_DIR)/$(APCUPSD_SOURCE): $(WGET) -P $(@D) $(APCUPSD_SITE)/$(@F) || \ $(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F) # # The source code depends on it existing within the download directory. # This target will be called by the top level Makefile to download the # source code's archive (.tar.gz, .bz2, etc.) # apcupsd-source: $(DL_DIR)/$(APCUPSD_SOURCE) $(APCUPSD_PATCHES) # # This target unpacks the source code in the build directory. # If the source archive is not .tar.gz or .tar.bz2, then you will need # to change the commands here. Patches to the source code are also # applied in this target as required. # # This target also configures the build within the build directory. # Flags such as LDFLAGS and CPPFLAGS should be passed into configure # and NOT $(MAKE) below. Passing it to configure causes configure to # correctly BUILD the Makefile with the right paths, where passing it # to Make causes it to override the default search paths of the compiler. # # If the compilation of the package requires other packages to be staged # first, then do that first (e.g. "$(MAKE) -stage -stage"). # # If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as # shown below to make various patches to it. # $(APCUPSD_BUILD_DIR)/.configured: $(DL_DIR)/$(APCUPSD_SOURCE) $(APCUPSD_PATCHES) make/apcupsd.mk $(MAKE) libgd-stage # $(MAKE) tcpwrappers-stage rm -rf $(BUILD_DIR)/$(APCUPSD_DIR) $(@D) $(APCUPSD_UNZIP) $(DL_DIR)/$(APCUPSD_SOURCE) | tar -C $(BUILD_DIR) -xvf - if test -n "$(APCUPSD_PATCHES)" ; \ then cat $(APCUPSD_PATCHES) | \ patch -d $(BUILD_DIR)/$(APCUPSD_DIR) -p0 ; \ fi if test "$(BUILD_DIR)/$(APCUPSD_DIR)" != "$(@D)" ; \ then mv $(BUILD_DIR)/$(APCUPSD_DIR) $(@D) ; \ fi cp -f $(SOURCE_DIR)/common/config.* $(@D)/autoconf/ sed -i -e 's|prefix=NONE|prefix=/opt|; s|/usr/share/hal/|/opt/share/hal/|' $(@D)/configure sed -i -e 's/strchr/&2/' $(@D)/include/astring.h sed -i -e 's/astring::strchr/&2/' $(@D)/src/lib/astring.cpp (cd $(@D); \ $(TARGET_CONFIGURE_OPTS) \ LD=$(TARGET_CC) \ CPPFLAGS="$(STAGING_CPPFLAGS) $(APCUPSD_CPPFLAGS)" \ LDFLAGS="$(STAGING_LDFLAGS) $(APCUPSD_LDFLAGS)" \ ac_cv_func_setpgrp_void=yes \ ac_cv_lib_gd_gdImagePng=yes \ ac_cv_lib_gd_gdImageGif=yes \ ./configure \ --build=$(GNU_HOST_NAME) \ --host=$(GNU_TARGET_NAME) \ --target=$(GNU_TARGET_NAME) \ --with-distname=unknown \ --prefix=/opt \ --sbindir=/opt/sbin \ --sysconfdir=/opt/etc/apcupsd \ --mandir=/opt/share/man \ --with-nologin=/opt/etc/apcupsd \ --with-pid-dir=/opt/var/run \ --with-log-dir=/opt/var/log \ --with-lock-dir=/opt/var/lock \ --enable-usb \ --enable-cgi \ --with-cgi-bin=/opt/share/www/cgi-bin \ --without-libwrap \ --without-x \ --disable-nls \ --disable-static \ ) # --with-libwrap=$(STAGING_PREFIX) \ ; touch $@ apcupsd-unpack: $(APCUPSD_BUILD_DIR)/.configured # # This builds the actual binary. # $(APCUPSD_BUILD_DIR)/.built: $(APCUPSD_BUILD_DIR)/.configured rm -f $@ $(MAKE) -C $(@D) touch $@ # # This is the build convenience target. # apcupsd: $(APCUPSD_BUILD_DIR)/.built # # If you are building a library, then you need to stage it too. # $(APCUPSD_BUILD_DIR)/.staged: $(APCUPSD_BUILD_DIR)/.built rm -f $@ $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install touch $@ apcupsd-stage: $(APCUPSD_BUILD_DIR)/.staged # # This rule creates a control file for ipkg. It is no longer # necessary to create a seperate control file under sources/apcupsd # $(APCUPSD_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: apcupsd" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(APCUPSD_PRIORITY)" >>$@ @echo "Section: $(APCUPSD_SECTION)" >>$@ @echo "Version: $(APCUPSD_VERSION)-$(APCUPSD_IPK_VERSION)" >>$@ @echo "Maintainer: $(APCUPSD_MAINTAINER)" >>$@ @echo "Source: $(APCUPSD_SITE)/$(APCUPSD_SOURCE)" >>$@ @echo "Description: $(APCUPSD_DESCRIPTION)" >>$@ @echo "Depends: $(APCUPSD_DEPENDS)" >>$@ @echo "Suggests: $(APCUPSD_SUGGESTS)" >>$@ @echo "Conflicts: $(APCUPSD_CONFLICTS)" >>$@ $(APCUPSD-CGI_IPK_DIR)/CONTROL/control: @install -d $(@D) @rm -f $@ @echo "Package: apcupsd-cgi" >>$@ @echo "Architecture: $(TARGET_ARCH)" >>$@ @echo "Priority: $(APCUPSD_PRIORITY)" >>$@ @echo "Section: $(APCUPSD_SECTION)" >>$@ @echo "Version: $(APCUPSD_VERSION)-$(APCUPSD_IPK_VERSION)" >>$@ @echo "Maintainer: $(APCUPSD_MAINTAINER)" >>$@ @echo "Source: $(APCUPSD_SITE)/$(APCUPSD_SOURCE)" >>$@ @echo "Description: $(APCUPSD_DESCRIPTION), web interface" >>$@ @echo "Depends: apcupsd, libgd" >>$@ @echo "Suggests: $(APCUPSD_SUGGESTS)" >>$@ @echo "Conflicts: $(APCUPSD_CONFLICTS)" >>$@ # # This builds the IPK file. # # Binaries should be installed into $(APCUPSD_IPK_DIR)/opt/sbin or $(APCUPSD_IPK_DIR)/opt/bin # (use the location in a well-known Linux distro as a guide for choosing sbin or bin). # Libraries and include files should be installed into $(APCUPSD_IPK_DIR)/opt/{lib,include} # Configuration files should be installed in $(APCUPSD_IPK_DIR)/opt/etc/apcupsd/... # Documentation files should be installed in $(APCUPSD_IPK_DIR)/opt/doc/apcupsd/... # Daemon startup scripts should be installed in $(APCUPSD_IPK_DIR)/opt/etc/init.d/S??apcupsd # # You may need to patch your application to make it use these locations. # $(APCUPSD_IPK) $(APCUPSD-CGI_IPK): $(APCUPSD_BUILD_DIR)/.built rm -rf $(APCUPSD_IPK_DIR) $(BUILD_DIR)/apcupsd_*_$(TARGET_ARCH).ipk rm -rf $(APCUPSD-CGI_IPK_DIR) $(BUILD_DIR)/apcupsd-cgi_*_$(TARGET_ARCH).ipk $(MAKE) -C $(APCUPSD_BUILD_DIR) DESTDIR=$(APCUPSD_IPK_DIR) install $(STRIP_COMMAND) $(APCUPSD_IPK_DIR)/opt/sbin/* $(APCUPSD_IPK_DIR)/opt/share/www/cgi-bin/* install -d $(APCUPSD-CGI_IPK_DIR)/opt/share $(APCUPSD-CGI_IPK_DIR)/opt/etc/apcupsd mv $(APCUPSD_IPK_DIR)/opt/share/www $(APCUPSD-CGI_IPK_DIR)/opt/share/ mv $(APCUPSD_IPK_DIR)/opt/etc/apcupsd/*.css $(APCUPSD-CGI_IPK_DIR)/opt/etc/apcupsd/ $(MAKE) $(APCUPSD_IPK_DIR)/CONTROL/control echo $(APCUPSD_CONFFILES) | sed -e 's/ /\n/g' > $(APCUPSD_IPK_DIR)/CONTROL/conffiles cd $(BUILD_DIR); $(IPKG_BUILD) $(APCUPSD_IPK_DIR) $(MAKE) $(APCUPSD-CGI_IPK_DIR)/CONTROL/control cd $(BUILD_DIR); $(IPKG_BUILD) $(APCUPSD-CGI_IPK_DIR) # # This is called from the top level makefile to create the IPK file. # apcupsd-ipk: $(APCUPSD_IPK) $(APCUPSD-CGI_IPK) # # This is called from the top level makefile to clean all of the built files. # apcupsd-clean: rm -f $(APCUPSD_BUILD_DIR)/.built -$(MAKE) -C $(APCUPSD_BUILD_DIR) clean # # This is called from the top level makefile to clean all dynamically created # directories. # apcupsd-dirclean: rm -rf $(BUILD_DIR)/$(APCUPSD_DIR) $(APCUPSD_BUILD_DIR) rm -rf $(APCUPSD_IPK_DIR) $(APCUPSD_IPK) rm -rf $(APCUPSD-CGI_IPK_DIR) $(APCUPSD-CGI_IPK) # # # Some sanity check for the package. # apcupsd-check: $(APCUPSD_IPK) $(APCUPSD-CGI_IPK) perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $^