diff -Naur linux-2.6.19-rc5.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c linux-2.6.19-rc5/arch/arm/mach-ixp4xx/dsmg600-setup.c 
--- linux-2.6.19-rc5.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c	2006-11-25 23:01:30.000000000 -0600
+++ linux-2.6.19-rc5/arch/arm/mach-ixp4xx/dsmg600-setup.c	2006-11-25 23:28:59.000000000 -0600
@@ -14,10 +14,12 @@
 #include <linux/kernel.h>
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
+#include <linux/leds.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
+#include <asm/setup.h>
 
 static struct flash_platform_data dsmg600_flash_data = {
 	.map_name		= "cfi_probe",
@@ -157,11 +159,54 @@
 #endif
 }
 
+/*
+ * The DSM-G600 bootstrap may pass in parameters, but we zap the mem
+ * settings to be safe (the box always has 64MByte at 0).  The
+ * passed in command line can override this default, we prepend
+ * to the config'ed default.
+ *
+ * NOTE: the startup sequence is:
+ * 	1) Call the machine fixup
+ * 	2) Parse the ATAG list, the ATAG_CMDLINE is copied in
+ * 	   to default_command_line which is the value of *from
+ * 	3) Parse the command line in *from (*not*
+ * 	   default_command_line unless they are the same!)
+ *
+ * Setting mi->nr_banks causes (2) to 'squash' (set to ATAG_NONE)
+ * any ATAG_MEM tags, but mem= command line options cause nr_banks
+ * to be reset to 0 (on the first mem=)
+ */
+
+static char dsmg600_command_line[] __initdata =
+	"root=/dev/mtdblock2 rootfstype=jffs2 init=/linuxrc "
+	"rtc-pcf8563.probe=0,0x51 "
+	CONFIG_CMDLINE;
+
+
+static void __init dsmg600_fixup(struct machine_desc *desc,
+		struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+	/* The DSM-G600 has one bank of 64MByte memory.
+	 * NOTE: setting nr_banks != 0 causes kernel/setup.c to remove
+	 * the mem tags from the tag list.  We need do nothing here!
+	 */
+	mi->nr_banks = 1;
+	mi->bank[0].start = 0;
+	mi->bank[0].size = (64*1024*1024);
+	mi->bank[0].node = PHYS_TO_NID(0);
+
+	/* A command line in the ATAG list will override this one,
+	 * as is intended.
+	 */
+	strlcpy(*cmdline, dsmg600_command_line, COMMAND_LINE_SIZE);
+}
+
 MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
 	/* Maintainer: www.nslu2-linux.org */
 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
+	.fixup		= dsmg600_fixup,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &ixp4xx_timer,